2. Article
  3. SKU14672

Article SKU14672 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the NERA bed. This document contains detailed information on the bed's parts, the tools required, and a step-by-step guide to ensure proper assembly. I'm here to help you with any questions you might have regarding the assembly process, parts or moving precautions, as described in the manual.
  • What tools are required for assembly?
    What should be done before starting assembly?
    How many people are required to move the bed?
Assembly Instructions
NERA
Bed
VERSION 1.0
Page 2 of 15
NERA Bed
ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having diculty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
NERA Bed Page 2 of 16
PARTS INVENTORY CONT.
ID DESCRIPTION QTY
CENTER BEAM 1
CENTER LEG 2
SLAT 28
PARTS INVENTORY
ID DESCRIPTION QTY
HEADBOARD 1
FOOTBOARD 1
CENTER BEAM BRACKET 2
LEFT SIDE RAIL 1
RIGHT SIDE RAIL 1
CORNER PIECE 2
LEG 2
1+ hours
5
TIME
# OF PEOPLE
DIFFICULTY
REQUIRED TOOL
Pozidriv screwdriver
NERA Bed Page 3 of 16
Structural integrity is warranted only if all
fasteners are properly installed & tightened,
and the bed is moved only per instructions.
DO NOT DRAG BED, ALWAYS LIFT WITH
AT LEAST TWO PEOPLE BEFORE MOVING
HARDWARE / TOOLS INVENTORY
ID DESCRIPTION QTY
WOOD DOWEL 14
M11 × 5MM SCREW 32
M6 × 12MM BOLT 8
M6 × 80MM SCREW 4
M6 × 50MM BOLT 6
SCREW NUT 14
SHAFT NUT 4
SPANNER 1
ALLEN KEY 1
#
#
Page 4 of 15
NERA Bed
1
FRONT SIDE OF HEADBOARD
×4
#
#
Page 5 of 15
NERA Bed
2
3
×2
×2
#
#
Page 6 of 15
NERA Bed
4
5
×6
×6
#
#
Page 7 of 15
NERA Bed
6
7
×4
For this step please
use spanner (9) and
allen key (8).
!
×4
For this step please
use spanner (8) and
allen key (9).
!
#
#
Page 8 of 15
NERA Bed
8
9
×2
×2
Page 9 of 15
NERA Bed
10
×4
#
#
Page 10 of 15
NERA Bed
11
12
×4
Ensure center beam bracket
(C) is leveled when installed.
!
#
#
Page 11 of 15
NERA Bed
13
14
×2
×6
×6
#
#
Page 12 of 15
NERA Bed
15
16
×2
×4
For this step please
use spanner (9) and
allen key (8).
!
Page 13 of 15
NERA Bed
17
×2
For this step please
use spanner (9) and
allen key (8).
!
Page 14 of 15
NERA Bed
18
×4
Adjust levelers as needed.
!
#
Page 15 of 15
NERA Bed
19
×4
DO NOT DRAG BED, ALWAYS LIFT WITH
AT LEAST TWO PEOPLE BEFORE MOVING
/