6.77
[172.0]
Ø2.25 [Ø57.2]
HOLE SAW 4 PLS.
8.00
[203.2]
5.63
[143.0]
5.63
[143.0]
(MATERIAL DEPENDENT)
FOR SELF TAPPING HOLE
4 PLS.
Ø.12 [#31 DRILL]
Part. 988-0176-14A
TOP
This template can only be used
for HDS-7 and HDS-7m units.
Surface area needed to mount unit without cover
Cut on this line
This template must be printed on
legal, A3 or larger size paper
Printing instructions:
1. After selecting File | Print, the printer
settings page will appear.
2. Set Page Scaling to “None.”
3. Select “Choose Paper Source by PDF page
size.”
4. Print the document.
VERIFY TEMPLATE DIMENSIONS BEFORE CUTTING ANY HOLES IN YOUR VESSEL
