MicroNet SP6008PWS Quick Installation Guide

MicroNet
Brand
MicroNet
Model
SP6008PWS
Category
Network switches
Type
Quick Installation Guide
5
Quick Installation Guide
8-Port Web Smart Switch with PoE
Model No.: SP6008PWS
6
P/N 2300-0535
7
Step 2:
Click Internet Protocol (TCP/IP) from the
components List and then click the Properties
Step 2:
Step 2:
•
Step 3:
In the Internet Protocol (TCP/IP) Properties window,
click the Use the following IP address.
Enter the following information:
IP Address: 192.168.2.xxx (xxx = 2~254)
Subnet Mask: 255.255.255.0
Step 2:
Step 2: •
Step 2:
Step 2: •
Step 2: •
•
•
Note: Do not use 192.168.2.1 as this address is reserved for
the web management tool.Note:
Step 4:
Open an Internet browser window and enter
192.168.2.1 in the address bar.
Step 4:
Step 4:
•
http://
Step 5:
The Login screen will show up.Step 5: •
Step 5:
Step 5:
Step 5:
•
•
Login in with User name: admin
Password : admin
Click Login
The PoE Switch includes a variety of configuration settings, for
more information, please refer to the SP6008PWS 8-Port
User's Manual.
Step1:
Step1:
• In the Network Connections window, double-click
Local Area Connection.
192.168.2.1
http://www.micronet.com.tw
4
1 2
Micronet SP6008PWS 8-Port Web Smart Switch with PoE
offers Broadcast storm protection, Port-based VLAN and QoS
to manage your networks. Moreover, it automatically detects
the presence of IEEE 802.3af-compliant devices (PD) and
supplies power to each appliance such as IP Camera, VoIP,
and Wireless Access Point.
3
Hardware Installation
The setup of the Switch can be performed using the following
steps:
Step 1: Connect a RJ-45 Ethernet cable from IEEE802.3af
compliant devices (PD) to an available PoE port of
SP6008PWS.
Step 2: Connect the AC Power Adaptor to SP6008PWS and
then to a power outlet.
-
Step 1: -
Step 1:
-
Step 1:
Introduction
•
•
•
•
•
•
•
•
Compliant with IEEE 802.3af standard
Each PoE port supplies power up to 15.4Watts
Support Broadcast storm protection
Support short-circuit protection
Support Port-based VLAN
Support Port security setting
Support one key Multi to one VLAN setting
Support remote management
Key Features
Tour of the System
Front Panel
RJ-45 PoE ports and LED indicators
Rear view
Work with AC 90-260V AC, 50-60Hz
Package Contents
Before you start installing SP6008PWS, please verify the
following package contents:
SP6008PW 8-Port Web Smart Switch with PoE
Quick Installation Guide
Manual CD
Power Cord
•
•
•
•
Note: Contact your dealer immediately if any of the above
items are missing, damaged, or if the unit does not work.Note:
LED Indicator
For definitions of LED indicators, please refer to the following
table:
On
On
Yellow
Green
__
__
__
Green
Yellow
Power is off
Power is on
Description
The Ethernet port is connecting
with the device
Receiving or transmitting data
Blink
POWER
Off
LED
Status
LINK/ACT
Off
On
Off
No device attached
PoE port is active
PoE port is not active
PoE
Color
Configuration
The Configuration of the Switch can be performed using the
following steps:
Step1:
• Click the Start button and select Control Panel
• In the Control Panel, double-click the
Network Connections•
  • Page 1 1
  • Page 2 2

MicroNet SP6008PWS Quick Installation Guide

MicroNet
Brand
MicroNet
Model
SP6008PWS
Category
Network switches
Type
Quick Installation Guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents