2 ASSEMBLE THE PIANO STAND AS SHOWN BELOW (continued)
C) Attach
the
Back
Panel Skirt
(#9)
to the piano legs as shown below with Crspsc &Panel
Screws (#7).
3 ASSEMBLE THE PIANO STAND AS SHOWN BELOW
Attach the piano to the stand using the four hand bolts (#11).
Position the Music Stand into the upright position.
Plug the Pedal cable (located
under the Pedal Assembly
#2)
llii~ltiiiit
The Pedal Cable can only be inserted
one way. Please make sure that it is
into its receptacle on the bottom
properly aligned before you insert
it.
of This Suzuki Piano
The Pedal Cable travels up the back of
the leg, not in the center of the leg as
shown.
'!ex
IYoU
many now tighten all the piano assembly hardware and insert the leg screw covers (#10) on the
loutside of
each
leg. •