VTech VTECH LS6425-4 User manual

Category
Telephones
Type
User manual
User’s manual
w w w.v t e c h p h o n e s . c o m
Models:
LS6425/LS6425-2/
LS6425-3/ LS6425-4/
LS6426-3/LS6426-4
Congratulations
on purchasing your new VTech product. Before using this telephone, please read
Important safety instructions on page 68 of this manual.
This manual has all the feature operations and troubleshooting necessary to install
and operate your new VTech telephone. Please review this manual thoroughly to
ensure proper installation and operation of this innovative and feature rich VTech
product. For support, shopping, and everything new at VTech, visit our website at
www.vtechphones.com.
In Canada, please visit www.vtechcanada.com.
The ENERGY STAR
®
program (www.energystar.gov) recognizes and
encourages the use of products that save energy and help protect our
environment. We are proud to mark this product with the ENERGY STAR
®
label indicating it meets the latest energy efficiency guidelines.
T
Compatible with
Hearing Aid T-Coil
TIA-1083
Telephones identified with this logo have reduced noise and interference
when used with most T-coil equipped hearing aids and cochlear implants. The
TIA-1083 Compliant Logo is a trademark of the Telecommunications Industry
Association. Used under license.
i
Table of contents
Getting started ................................. 1
Parts checklist ................................... 1
Telephone installation........................ 2
Battery installation ............................. 3
Battery charging ................................ 4
Installation options ............................. 5
Tabletop to wall mount installation .... 5
Wall mount to tabletop installation ..... 6
Telephone base layout ...................... 7
Handset layout................................... 8
Telephone settings ........................ 11
Using the menu ............................... 11
Ringer volume (telephone base) ..... 12
Ringer volume (handset) ................. 12
Ringer tone ...................................... 12
Set date and time ............................ 13
LCD language.................................. 13
Voice announce caller ID................. 14
Clear voicemail indicators................ 15
Rename handset ............................. 16
Key tone .......................................... 16
CID time synchronization................. 17
Home area code .............................. 17
Dial mode ........................................ 18
Website............................................ 18
Telephone operation ..................... 19
Make a call ...................................... 19
Predial a call .................................... 19
Answer a call ................................... 19
End a call ......................................... 19
Speakerphone ................................. 19
Listening volume.............................. 19
Mute................................................. 20
Temporary ringer silencing .............. 20
Temporary tone dialing .................... 20
Find handset .................................... 21
Call waiting ...................................... 21
Equalizer.......................................... 21
Redial ............................................. 21
Review and dial a redial entry ......... 22
Delete a redial entry ........................ 22
Copy a number from the redial list to
the directory ................................. 22
Chain dialing .................................... 23
Multiple handset use ..................... 24
Join a call in progress ...................... 24
Intercom........................................... 24
Answer an incoming call during an
intercom call ................................. 25
Announced transfer ......................... 25
Blind transfer ................................... 26
Push-to-talk (PTT) ........................... 27
Turn PTT on or off ........................... 27
PTT to a single handset................... 28
PTT to multiple handsets ................. 29
Answer a PTT call ........................... 30
Change a one-to-one PTT call to
intercom call ................................. 30
End a PTT call ................................. 31
Answer an incoming call during
a PTT call ..................................... 31
Make an outgoing call during
a PTT call ..................................... 31
Directory ......................................... 32
About the directory .......................... 32
Add a directory entry ....................... 33
Search the directory ........................ 34
Alphabetical search ......................... 34
Dial a directory entry........................ 34
ii
Edit a directory entry........................ 35
Delete a directory entry ................... 35
Assign a directory entry to a
speed dial location ....................... 36
Dial a speed dial entry ..................... 36
Reassign a speed dial number ........ 37
Delete a speed dial entry ................. 37
Caller ID .......................................... 38
About caller ID ................................. 38
Information about caller ID with call
waiting .......................................... 38
Caller ID log ..................................... 39
Memory match ................................. 39
Missed call indicator ........................ 40
Review the caller ID log ................... 40
View dialing options ......................... 40
Dial a caller ID log entry .................. 41
Save a caller ID log entry to the
directory ....................................... 41
Delete the caller ID log entries ........ 42
Caller ID log display screen
messages ..................................... 42
Answering system settings .......... 43
Answering system ........................... 43
Announcement ................................ 43
Record your own announcement..... 43
Play your announcement ................. 44
Delete your announcement ............. 44
Answer on/off................................... 45
Call screening .................................. 45
Number of rings ............................... 46
Remote access code ....................... 46
Message alert tone .......................... 47
Message recording time .................. 47
Answering system operation ....... 48
Answering system and voicemail .... 48
Using the answering system and
voicemail together ........................ 48
Message capacity ............................ 49
New message indication.................. 49
Call screening .................................. 49
Call intercept.................................... 49
Message playback ........................... 50
Delete all old messages .................. 52
Record, play and delete memos ...... 53
Message window displays ............... 53
Remote access ................................ 54
Appendix ........................................ 55
Handset display screen
messages ..................................... 55
Handset and telephone base
indicators ...................................... 57
Battery ............................................. 58
Expand your telephone system ....... 59
Add and register a handset ............. 59
Deregister handsets ........................ 60
Troubleshooting ............................... 61
Important safety instructions............ 68
Precautions for users of implanted
cardiac pacemakers ..................... 69
Operating range............................... 69
Maintenance .................................... 69
About cordless telephones .............. 70
The RBRC
®
seal .............................. 70
FCC, ACTA and IC regulations ....... 71
Limited warranty .............................. 73
Technical specications................... 75
Index ............................................... 76
1
Parts checklist
Your telephone package contains the following items. Save your sales receipt and
original packaging in case it is necessary to ship your telephone for warranty service.
Getting started
Handset
(1 for LS6425, 2 for LS6425-2,
3 for LS6425-3 and LS6426-3, and
4 for LS6425-4 and LS6426-4)
Quick start guide
To purchase replacement batteries or power adapters, visit our website at
www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to
www.vtechcanada.com or call 1 (800) 267-7377.
User’s manual
Telephone baseHandset charger
and charger adapter
(1 for LS6425-2, 2 for LS6425-3 and
LS6426-3, and 3 for LS6425-4 and
LS6426-4)
Wall mount bracket
Battery
(1 for LS6425, 2 for LS6425-2,
3 for LS6425-3 and LS6426-3, and
4 for LS6425-4 and LS6426-4)
Battery compartment cover
(1 for LS6425, 2 for LS6425-2,
3 for LS6425-3 and LS6426-3,
and 4 for LS6425-4 and LS6426-4)
Telephone line cord
Telephone base
power adapter
Getting started
2
Telephone installation
Install the telephone base and charger(s) as shown below.
Make sure that the electrical outlet is not controlled by a wall switch.
If you subscribe to digital subscriber line (DSL) high-speed Internet service
through your telephone line, you must install a DSL filter between the telephone
line cord and the telephone wall jack. The filter prevents noise and caller ID
problems caused by DSL interference. Contact your DSL service provider for
more information about DSL filters.
A A
Telephone
wall jack
Telephone
line cord
If you have
DSL high
speed Internet
service, a
DSL filter (not
included) is
required.
Telephone base
power adapter
Telephone base
Electrical outlet
not controlled
by a wall switch
Charger adapter
Charger
Electrical
outlet not
controlled by
a wall switch
Getting started
3
Battery installation
Install the battery as shown below.
Plug the battery connector securely into the socket inside the handset battery
compartment, matching the color-coded label.
Place the battery with the label THIS SIDE UP facing up and the wires inside
the battery compartment.
Align the cover flat against the battery compartment, then slide it towards the
center of the handset until it clicks into place.
Charge the handset by placing it in the telephone base or charger. The
CHARGE light is on when the handset is charging.
1.
2.
3.
4.
If the handset will not be used for a long time, disconnect and remove the
battery to prevent possible leakage.
To purchase replacement batteries, visit our website at www.vtechphones.com
or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call
1 (800) 267-7377.
1 2
3
4
CHARGE light
remains on when
charging.
Getting started
4
Battery charging
Once you have installed the battery, the screen indicates the battery status (see
the table below). If necessary, place the handset in the telephone base or charger
to charge the battery. For best performance, keep the handset in the telephone
base or charger when not in use. The battery is fully charged after 10 hours of
continuous charging. See the table on page 58 for battery operating times.
If the screen is blank or displays Place in charger, you need to charge the
handset without interruption for at least 30 minutes to give the handset enough
charge to use the telephone for a short time. When the battery is low, the
handset displays Low battery along with a flashing icon. If you are on a call in
low battery mode, the handset plays short beeps to alert you.
The following table summarizes the battery charge indicators and actions to take.
Battery indicators Battery status Action
The screen is blank, or
displays Place in charger
and flashes.
Battery has no or
very little charge. The
handset cannot be used.
Charge without interruption
(about 30 minutes).
The screen displays
Low battery and flashes.
Battery has enough
charge to be used for a
short time.
Charge without interruption
(about 30 minutes).
The screen displays
HANDSET X.
Battery is charged. To keep the battery charged,
place it in the telephone base
or charger when not in use.
If you place the handset in the telephone base or charger without installing a
battery, the screen displays No battery.
After you install your telephone or power returns following a power outage, the
handset will prompt you to set the date and time (see page 13). To skip setting
the date and time, press OFF/CANCEL.
SET DATE
MM/DD/YY
Getting started
5
Installation options
Your telephone base is ready for tabletop use. If you want to mount your
telephone on a wall, use the provided wall mount bracket to connect with a
standard dual-stud telephone wall mounting plate. If you do not have this
mounting plate, you can purchase one from many hardware or consumer
electronics retailers. You may need a professional to install the mounting plate.
Tabletop to wall mount installation
Plug one end of the telephone line cord into the TEL LINE jack on the bottom
of the telephone base. Plug the small end of the power adapter into the
POWER jack on the bottom of the telephone base.
Position the lower portion grooves on the telephone base to the lower portion
tabs (marked A) on the wall mount bracket. Make sure the upper portion
grooves of the telephone base are above the upper portion tabs on the wall
mount bracket.
Route the telephone line cord through the wall mount bracket hole and plug
it into the telephone wall jack. Route the power cord out of the bottom of the
telephone and plug it into an electrical outlet not controlled by a wall switch.
Align the holes on the bracket with the standard wall plate and slide the
bracket down until it locks securely. Bundle the telephone line cord and power
adapter cord neatly with twist ties.
1.
2.
3.
4.
A A
1 2
3 4
Getting started
6
Wall mount to tabletop installation
If the telephone line cord and power adapter cord are bundled, untie them first.
Push the black wall mount bracket up and remove it from the wall plate.
Unplug the telephone line cord (or DSL filter) from the wall. Unplug the power
adapter from the power outlet.
Push the wall mount bracket down to remove it from the telephone base.
See Telephone installation on page 2.
1.
2.
3.
4.
1
2
3
Getting started
7
Telephone base layout
X/DELETE
Press to delete the message
currently playing (page 50).
When the telephone is not in
use, press twice to delete all
old messages (page 52).
Message window
Shows the number of
messages and other
answering system
information (page 53).
IN USE light
Flashes when there is an incoming call,
another telephone sharing the same line
is in use or when the handsets are
being deregistered.
On when the telephone is in use, or the
answering system is answering a call.
On when the handset is being registered.
/FIND HANDSET
Press to page all
system handsets
(page 21).
/REPEAT
Press once to repeat a message
or press twice to play the
previous message (page 50).
/PLAY/STOP
Press to play messages or
press to stop message playback
(page 50).
/ANS ON/OFF
Press to turn the
answering system on
or off (page 45).
/SKIP
Press to skip to
the next message
(page 50).
/VOL/
Press to adjust the
speaker volume
during playback
(page 50).
Press to adjust the
telephone base
ringer volume when
the telephone is not
in use (page 12).
8
Handset layout
Getting started
CHARGE light
On when the handset is charging in the telephone base
or charger (page 3).
/ /VOLUME (directory/volume)
Press to enter the directory when the telephone is
not in use (page 34).
While in a menu, press to scroll up.
During a call or message playback, press to increase
the listening volume (page 19 or page 51).
When entering numbers or names in the directory,
press to move the cursor to the right.
MUTE/DELETE
While on a call, press to mute the microphone (page 20).
While reviewing the redial list, directory or caller ID log,
press to delete an individual entry (pages 22, 35
and 42 respectively).
While the handset is ringing, press to silence the ringer
temporarily (page 20).
While predialing, press to delete digits (page 19).
/FLASH
Press to make or answer a call (page 19).
During a call, press to answer an incoming call when you
receive a call waiting alert (page 21).
1
While reviewing a caller ID log entry, press repeatedly to
add or remove 1 in front of the telephone number before
dialing or saving it in the directory (page 40).
With the phone set for pulse dialing, press to temporarily
change to tone dialing while on a call (page 20).
/SPEAKER
Press to make or answer a call (page 19).
During a call, press to switch between the
speakerphone and the handset (page 19).
9
Handset layout
Getting started
CID/ /VOLUME (caller ID/volume)
Press to review the caller ID log when the telephone
is not in use (page 40).
While in a menu, press to scroll down.
During a call or message playback, press to decrease
the listening volume (page 19 or page 51).
When entering numbers or names in the directory,
press to move the cursor to the left.
MENU/SELECT
Press to show the menu.
While in a menu, press to choose an item, or save an
entry or setting.
OFF/CANCEL
During a call, press to hang up (page 19).
While the handset is ringing, press to silence the
ringer temporarily (page 20).
While the telephone is not in use, press and hold to
delete the missed call indicator (page 40).
While in a menu, press to go back to the previous menu.
While in a menu, press and hold to return to idle mode.
Dialing keys
Press to enter numbers or characters.
# (pound key)
Press repeatedly to show other dialing options when
reviewing a caller ID log entry (page 40).
When saving caller ID log entries to the directory.
press to switch the name order (page 41).
EQ
During an outside call, intercom call, message or
announcement playback, press to change the audio
quality to best suit your hearing (page 21).
REDIAL/PAUSE
Press to review the redial list (page 22).
While predialing or entering numbers into the directory,
press and hold to insert a dialing pause (page 33).
Getting started
10
PUSH TO TALK (PTT)
Press to begin a broadcast to
one or multiple handsets
(pages 28 and 29).
Press and hold to broadcast to
a group of handsets when the
handset is not in use (page 29).
PUSH TO TALK
Handset layout
1111
Using the menu
In the ringers menu, you can select the ringer tones and adjust the ringer volume
for incoming calls.
In the settings menu, you can change and edit the settings for LCD language,
announce caller ID, voicemail indicators, handset name, key tone, CID time
synchronization, home area code and dial mode.
Go to Answering system settings starting on page 43 for instructions on how to
use a system handset to modify the answering system settings shown below.
Setting Page
Announcement (record, play and delete) 43-44
Answer on/off 45
Call screening 45
Number of rings 46
Remote access code 46
Message alert tone 47
Message recording time 47
To enter the handset menu:
Press MENU/SELECT when the handset is not in use.
Press or until the screen displays the desired feature menu.
Press MENU/SELECT to enter that menu.
To return to the previous menu, press OFF/CANCEL.
To return to idle mode, press and hold OFF/CANCEL.
1.
2.
3.
Telephone settings
1212
Ringer volume (telephone base)
Press /VOL or /VOL on the right side of the telephone base to adjust the
ringer volume when the telephone is not in use. When you set the base ringer
volume to off, the message window displays 0 and the system announces, Base
ringer is off.” When the telephone is ringing, press /VOL to temporarily turn
the base ringer off.
Ringer volume (handset)
You can set the ringer volume or turn the ringer off. When the
ringer is off, Ringer off and appear on the screen.
Press MENU/SELECT when the handset is not in use.
Press or to highlight >Ringers, then press
MENU/SELECT.
Press MENU/SELECT to select >Ringer volume.
Press or to sample each volume level.
Press MENU/SELECT to save your selection and return to
the previous menu. You hear a confirmation tone.
The ringer volume also determines the ringer volume of intercom calls and paging
tone. However, paging volume ranges from levels 4 to 6 only.
If the ringer volume is set to off, the handset displays Caller ID won’t be
announced when you save the setting. The caller ID will not be announced
when you have an incoming call (page 14).
Ringer tone
You can choose from different ringer tones for each handset.
Press MENU/SELECT when the handset is not in use.
Press or to highlight >Ringers, then press MENU/SELECT.
Press or to highlight >Ringer tone, then press
MENU/SELECT.
Press or to sample each ringer tone.
Press MENU/SELECT to save your selection and return to the
previous menu. You hear a confirmation tone.
If you turn off the ringer volume, you will not hear ringer tone samples.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
Intercom
>Ringers
>Ringer volume
Ringer tone
RINGER VOLUME
Intercom
>Ringers
>Ringer volume
Ringer tone
RINGER VOLUME
Ringer volume
>Ringer tone
RINGER TONE
>Tone 1
Ringer volume
>Ringer tone
RINGER TONE
>Tone 1
Telephone settings
1313
Telephone settings
Set date and time
The answering system announces the date and time of each message prior to
playing it. Before using the answering system, set the date and time as follows. If
you subscribe to caller ID service, the day, month and time are set automatically
with each incoming call. However, the year must be correct so that the day of the
week can be calculated from the caller ID information. You can also turn off the
date and time settings of the caller ID service (see CID time synchronization on
page 17) and set the date and time manually.
Press MENU/SELECT when the handset is not in use.
Press or to highlight >Set date/time, then press
MENU/SELECT.
When the month is flashing, press or until the screen
displays the correct month. Press MENU/SELECT to confirm.
-OR-
Use the dialing keys (0-9) to enter the current month (for
example, if the month is March, you must enter 03).
Repeat Step 3 to set the correct date and year and then
press MENU/SELECT to advance to set the time.
Repeat Step 3 until the time is set. Press or to select
AM or PM, or press 2 for AM or 7 for PM.
Press MENU/SELECT to save the settings and return to the previous menu.
You hear a confirmation tone.
If the date and time are not set when a message is recorded, the system
announces, “Time and date not set,” before each message plays.
The telephone plays two beeps if you enter an invalid number.
LCD language
You can select a language (English, French or Spanish) to
be used in all screen displays.
Press MENU/SELECT when the handset is not in use.
Press or to highlight >Settings, then press
MENU/SELECT.
Press MENU/SELECT to select >LCD language.
Press or to highlight English, Français or Español.
Press MENU/SELECT to save your selection and return to
the previous menu. You hear a confirmation tone.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
Ringers
>Set date/time
SET DATE
MM/DD/YY
SET TIME
HH:MM --
Ringers
>Set date/time
SET DATE
MM/DD/YY
SET TIME
HH:MM --
Set date/time
>Settings
>LCD language
Annc Caller ID
LCD LANGUAGE
>English
Set date/time
>Settings
>LCD language
Annc Caller ID
LCD LANGUAGE
>English
14
Telephone settings
14
Voice announce caller ID
The voice announce caller ID feature lets you know who’s calling without having to
look at the display. When you have an incoming call, the handset and/or base
announces the caller’s name based on the directory or caller ID information. If the
caller’s name is private or unknown, the phone number will be announced. If the
caller’s phone number is also private or unknown, no caller information will be
announced. If the telephone number has over 11 digits, only the last 11 digits will
be announced. Unless you change it, the voice announce caller ID feature is
already turned on.
Press MENU/SELECT when the handset is not in use.
Press or to highlight >Settings, then press
MENU/SELECT.
Press or to highlight >Annc Caller ID, then press
MENU/SELECT.
Press or to highlight >HANDSET or >BASE, then press
MENU/SELECT.
Press or to choose >On or >Off.
Press MENU/SELECT to save your selection and return to
the previous menu. You hear a confirmation tone.
Voice announce caller ID is available in English only.
The voice announce caller ID is muted when you turn the ringer off.
If you set the number of rings that the answering system answers calls as
3 rings (page 46), the answering system may not have enough time to
announce the caller’s full information.
Only the first four registered handsets are able to use the voice announce
caller ID feature.
1.
2.
3.
4.
5.
6.
LCD language
>Annc Caller ID
ANNC CALLER ID
>HANDSET
HS ANNOUNCE CID
>On
LCD language
>Annc Caller ID
ANNC CALLER ID
>HANDSET
HS ANNOUNCE CID
>On
15
Telephone settings
15
Clear voicemail indicators
If you subscribe to voicemail service offered by your telephone service provider,
New voicemail and appear on the handset when you have new voicemail
messages. Contact your telephone service provider for more information and
assistance about using your voicemail service.
After you have listened to all new voicemail messages, the indicators on the
handset turn off automatically.
Use the clear voicemail feature when the telephone indicates that there is
new voicemail but there are none (for example, when you have accessed your
voicemail while away from home). Clearing the voicemail waiting indicator only
turns off the indicators; it does not delete your voicemail
messages. As long as you have new voicemail messages,
your telephone service provider continues to send the signal to
turn on the indicators.
Press MENU/SELECT when the handset is not in use.
Press or to highlight >Settings, then press
MENU/SELECT.
Press or to highlight >Clr voicemail, then press
MENU/SELECT. The screen displays Turn off indicator?
Press MENU/SELECT to confirm and return to the previous
menu. You hear a confirmation tone.
Your telephone service provider may alert you of new messages with a stutter
(broken) dial tone. Contact your telephone service provider for details.
Voicemail is different from answering system messages recorded in your
cordless phone’s answering system. For more information about the difference,
see page 48.
1.
2.
3.
4.
Annc Caller ID
>Clr voicemail
Turn off
indicator?
HANDSET 2
New voicemail
9:30
AM
5/10
Annc Caller ID
>Clr voicemail
Turn off
indicator?
HANDSET 2
New voicemail
9:30
AM
5/10
16
Telephone settings
16
Rename handset
You can change the name for each registered handset. The name can be up to
11 characters.
Press MENU/SELECT when the handset is not in use.
Press or to highlight >Settings, then press
MENU/SELECT.
Press or to highlight >Rename handset, then press
MENU/SELECT.
Use the dialing keys to enter a name.
Press MUTE/DELETE to delete a character.
Press and hold MUTE/DELETE to delete all characters.
Press or to move the cursor to the left or right.
Press MENU/SELECT to save the name and return to the previous menu. You
hear a confirmation tone.
If the new handset name contains no characters or digits, the default handset
name will be used.
Key tone
You can adjust the key tone volume or turn it off for each handset. If you turn the
key tone off, there are no beeps when you press the handset keys.
Press MENU/SELECT when the handset is not in use.
Press or to highlight >Settings, then press
MENU/SELECT.
Press or to highlight >Key tone, then press
MENU/SELECT.
Press or to select the desired volume or Off.
Press MENU/SELECT to save your selection and return to
the previous menu. You hear a confirmation tone.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
Clr voicemail
>Rename handset
RENAME HANDSET
HANDSET____
Clr voicemail
>Rename handset
RENAME HANDSET
HANDSET____
Rename handset
>Key tone
KEY TONE
Rename handset
>Key tone
KEY TONE
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82

VTech VTECH LS6425-4 User manual

Category
Telephones
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI