Customer Service: 800-626-1126 | rev-a-shelf.com
2
Remove the existing shelves
from your 432 Wall Filler -
needle nose pliers may be
needed to remove the shelf
pins (See Fig1)
STEP 1
Attach the insert in your 3”
wall 432 ller using the 4
brackets provided and the
systems holes on your unit.
(See Fig 2)
NOTE: if installing into a 432
WF that is 33” or taller, there
will be enough space above
the wire K-Cup rack to install
or leave existing shelves. (See
cover image for reference)
STEP 2
STEP 1) REMOVE THE EXISTING SHELVES, SHELF MOUNTING PINS,
AND THE 2 CHROME RAILS ON THE BOTTOM SHELF.
STEP 2) PLACE KCUP FRAME INSIDE THE WALL FILLER FRAME
AND MOUNT WITH THE MOUNTING BRAKETS AND SCREWS
AS SHOWN, MOUNT THE FRAME IN LEFT OR RIGHT HAND
INSTALLATION REFER TO "DETAIL A" AND "DETAIL B" FOR
LEFT OR RIGHT HANDED INSTALLATION.
BEFORE
AFTER
SEE DETAIL A
LEFT HAND
KCUP RACK
MOUNTING
BRACKET
4 LOCATIONS
REMOVE 2 CHROME
RAILS
REMOVE SHELVES AND SHELF
MOUNTING PINS
SEE DETAIL B
RIGHT HAND
SCALE 0.625
DETAIL A
SCALE 0.625
DETAIL B
FIGURE 1
FIGURE 2
PROVIDED BRACKETS & SCREWS
STEP 1) REMOVE THE EXISTING SHELVES, SHELF MOUNTING PINS,
AND THE 2 CHROME RAILS ON THE BOTTOM SHELF.
STEP 2) PLACE KCUP FRAME INSIDE THE WALL FILLER FRAME
AND MOUNT WITH THE MOUNTING BRAKETS AND SCREWS
AS SHOWN, MOUNT THE FRAME IN LEFT OR RIGHT HAND
INSTALLATION REFER TO "DETAIL A" AND "DETAIL B" FOR
LEFT OR RIGHT HANDED INSTALLATION.
BEFORE
AFTER
SEE DETAIL A
LEFT HAND
KCUP RACK
MOUNTING
BRACKET
4 LOCATIONS
REMOVE 2 CHROME
RAILS
REMOVE SHELVES AND SHELF
MOUNTING PINS
SEE DETAIL B
RIGHT HAND
SCALE 0.625
DETAIL A
SCALE 0.625
DETAIL B
12400 Earl Jones Way
Louisville, KY 40299
rev-a-shelf.com
Customer Service: 800-626-1126