Sanyo PLC XU115 - XGA LCD Projector User manual

Brand: Sanyo

Model: PLC XU115 - XGA LCD Projector

Category: Data projectors

Type: User manual

This manual is also suitable for

PLC-XU115

Multimedia Projector

MODEL PLC-XU115

Owner’s Manual

Network Supported

  □WirelessLAN

IEEE802.11b/g

  □WiredLAN

   100-Base-TX/10-Base-T

Memory Viewer

  □SDCardMemoryViewer

Refertotheowner’smanualsbelowfordetails

aboutnetworkandmemoryviewerfunction.

■ NetworkSet-upandOperation

■ Memoryviewer

Features and Design

ThisMultimediaProjectorisdesignedwiththemostadvancedtechnologyforportability,durability,andeaseofuse.

Thisprojectorutilizesbuilt-inmultimediafeatures,apaletteof16.77millioncolors,andmatrixliquidcrystaldisplay

(LCD)technology.

◆ Compact Design

 Thisprojectorisdesignedcompactinsizeandweight.

Itiseasytocarryandinstalledanywhereyouwishto

use.

◆ Capable of 360-degree Projection

 Thisprojectoriscapableof360-degreeprojection.

*Somerestrictionrequired,seepage8.

◆ Simple Computer System Setting

 TheprojectorhastheMulti-scansystemtoconformto

almost all computer output signals quickly (p.32). Up

toUXGAresolutioncanbeaccepted.

◆ Useful Functions for Presentations

 -Thedigitalzoomfunctionallowsyoutofocusonthe

crucialinformationduringapresentation(p.39).

 -Blackboards* can be used as a projection screen.

*TheboardcolorislimitedtoGreen(pp.36,43).

◆

Power Management

 The Power management function reduces power

consumptionandmaintainsthelamplife(p.52).

◆ Lamp Control

 Brightness of the projection lamp can be selected

(pp.28,53).

◆ Quick Termination

 TheAC power cord can be unplugged immediately

after turning off the projector without waiting for the

terminationofthecoolingfanrotation(p.23).

◆ Logo Function

 TheLogofunctionallowsyoutocustomizethescreen

logo (pp.49–50). You can capture an image for the

screen logo and use it for the starting-up display or

betweenpresentations.

◆ Multilanguage Menu Display

 Operationmenuisavailablein16languages;English,

German,French,Italian,Spanish,Portuguese,Dutch,

Swedish, Finnish, Polish, Hungarian, Romanian,

Russian,Chinese,Korean,andJapanese(p.47).

◆ Security Function

 The Security function helps you to ensure security

of the projector. With the Key lock function, you can

locktheoperationonthetopcontrolorremotecontrol

(p.54). PIN code lock function prevents unauthorized

useoftheprojector(pp.22,54–55).

◆

Helpful Maintenance Functions

 Lamp and filter maintenance functions provide for

betterandpropermaintenanceoftheprojector.

◆ LAN Network Function

 This projector is loaded with the Wired and Wireless

LANnetworkfunction.Youcanproject an imageona

computeraswellasoperateandmanagetheprojector

via network. For details, refer to the owner’s manual

“NetworkSet-upandOperation.”

◆ Memory Viewer Function

 InsertthededicatedSDcardmemoryintotheprojector

to project images or presentation data stored within.

Youdonothavetocarrycomputersorotherequipment

forapresentation.

  *SD card memory is not supplied with the projector.

For details, refer to the owner’s manual of Memory

viewer.

◆ Input Search Function

Inputsignalcanbesearchedautomatically.(p.51)



Notes:

 •TheOn-ScreenMenuandfiguresinthismanualmaydifferslightlyfromtheproduct.

 •Thecontentsofthismanualaresubjecttochangewithoutnotice.

Table of Contents

Trademarks

Each name of corporations or products in this book is either a registered trademark or a trademark of its respective

corporation.

Features and Design . . . . . . . . . . . . . . . . . . .3

Table of Contents . . . . . . . . . . . . . . . . . . . . . .4

To the Owner. . . . . . . . . . . . . . . . . . . . . . . . . .5

Safety Instructions. . . . . . . . . . . . . . . . . . . . .6

AirCirculation 7

MovingtheProjector 7

InstallingtheProjectorinProperDirections 8

Compliance. . . . . . . . . . . . . . . . . . . . . . . . . . .9

Part Names and Functions . . . . . . . . . . . . .10

Front 10

Back 10

Bottom 10

RearTerminal 11

TopControl 12

RemoteControl 13

LaserPointerFunction 14

PointerFunction 14

WirelessMouseOperation 15

RemoteControlCode 15

RemoteControlBatteryInstallation 16

RemoteControlOperatingRange 16

AdjustableFeet 16

Installation. . . . . . . . . . . . . . . . . . . . . . . . . . .17

PositioningtheProjector 17

ConnectingtheACPowerCord 18

ConnectingtoaComputer 19

ConnectingtoVideoEquipment20

ConnectingtoComponentVideoEquipment 21

Basic Operation . . . . . . . . . . . . . . . . . . . . . .22

TurningOntheProjector 22

TurningOfftheProjector 23

HowtoOperatetheOn-ScreenMenu 24

MenuBar 25

ZoomandFocusAdjustment 26

AutoSetupFunction 26

KeystoneCorrection 26

SoundAdjustment 27

RemoteControlOperation 28

Computer Input . . . . . . . . . . . . . . . . . . . . .30

InputSourceSelection

(RGB:Computer1(Analog)/Computer2) 30

InputSourceSelection

(RGB(PCdigital),RGB(AVHDCP)) 31

ComputerSystemSelection 32

AutoPCAdjustment 33

ManualPCAdjustment 34

ImageModeSelection 36

ImageAdjustment 37

ScreenSizeAdjustment 38

Forzoominginandouttheimages39

Video Input . . . . . . . . . . . . . . . . . . . . . . . . . .40

InputSourceSelection(Video,S-video) 40

InputSourceSelection

(Component,RGBScart21-pin) 41

VideoSystemSelection 42

ImageModeSelection 43

ImageAdjustment 44

ScreenSizeAdjustment 46

Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Setting 47

Maintenance and Cleaning . . . . . . . . . . . . .58

WarningIndicator 58

CleaningtheFilter 59

ResettingtheFilterCounter 59

AttachingtheLensCap60

CleaningtheProjectionLens 60

CleaningtheProjectorCabinet 60

LampReplacement 61

ResettingtheLampCounter 62

Appendix. . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Troubleshooting 63

MenuTree 67

IndicatorsandProjectorCondition 69

CompatibleComputerSpecifications 70

TechnicalSpecifications 72

OptionalParts 73

PJLinkNotice 74

ConfigurationsofTerminals 75

PINCodeNumberMemo 76

Dimensions77

To the Owner

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR

BACK). NO USER-SERVICEABLE PARTS

INSIDE EXCEPT LAMP REPLACEMENT.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS

VOLTAGE CONSTITUTINGARISKOFELECTRIC

SHOCKISPRESENTWITHINTHISUNIT.

THIS SYMBOL INDICATES THAT THERE ARE

IMPORTANT OPERATING AND MAINTENANCE

INSTRUCTIONS IN THE OWNER'S MANUAL

WITHTHISUNIT.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Before installing and operating this projector, read this

manualthoroughly.

This projector provides many convenient features and

functions. Operating the projector properly enables

youtomanage those featuresandmaintainsitin good

conditionformanyyearstocome.

Improperoperationmayresultinnotonlyshorteningthe

product-life, but also malfunctions, fire hazard, orother

accidents.

Ifyourprojectorseemstooperateimproperly,readthis

manualagain, checkoperations and cableconnections

and try the solutions in the “Troubleshooting” section

in the back of this booklet. If the problem still persists,

contactthedealerwhereyoupurchasedtheprojectoror

theservicecenter.

Safety Precaution

CAUTION

DO NOT SET THE PROJECTOR IN GREASY, WET, OR

SMOKY CONDITIONS SUCH AS IN A KITCHEN TO PREVENT

A BREAKDOWN OR A DISASTER. IF THE PROJECTOR

COMES IN CONTACT WITH OIL OR CHEMICALS, IT MAY

BECOME DETERIORATED.

READ AND KEEP THIS OWNER'S MANUAL FOR

LATER USE.

WARNING: TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

–Thisprojectorproducesintenselightfromtheprojection

lens. Do not stare directly into the lens, otherwise

eye damage could result. Be especially careful that

childrendonotstaredirectlyintothebeam.

–Installtheprojectorinaproperposition.Otherwiseit

mayresultinfirehazard.

–Allowingtheproperamountofspaceonthetop,sides,

and rear of the projector cabinet is critical for proper

air circulation and cooling of the unit. The dimension

shown here indicate the minimum space required.

If the projector is to be built into a compartment or

similarlyenclosed,theseminimumdistancesmustbe

maintained.

–Donotcovertheventilationslotontheprojector.Heat

build-up can reduce theservice life ofyour projector,

andcanalsobedangerous.

–Iftheprojectorisunusedforanextendedtime,unplug

theprojectorfromthepoweroutlet.

0.7’(20 cm)

1.5’(50 cm)

3’(1 m)

1.5’(50 cm)

SIDEandTOP REAR

NOTE: Thissymbolandrecyclesystemareapplied

toEUcountriesonlyandnotappliedtothe

countriesintheotherareaoftheworld.

Your SANYO product is designed and

manufactured with high quality materials

and components which can be recycled

andreused.

This symbol means that electrical and

electronic equipment, at their end-of-life,

should be disposed of separately from

yourhouseholdwaste.

Please dispose of this equipment at your local

community waste collection/recycling centre.  In the

EuropeanUnionthereareseparatecollectionsystems

forusedelectricalandelectronicproducts.

Pleasehelpustoconservetheenvironmentwelivein!

CAUTION

Not for use in a computer room as defined in the

StandardfortheProtectionofElectronicComputer/Data

ProcessingEquipment,ANSI/NFPA75.

Ne peut être utilisé dans une salle d’ordinateurs telle

que définie dans la normeANSI/NFPA 75 Standard

for Protection of Electronic Computer/Data Processing

Equipment.

Safety Instructions

All the safety andoperating instructions should be read

beforetheproductisoperated.

Read all of the instructions given here and retain them

forlateruse.UnplugthisprojectorfromACpowersupply

before cleaning. Do not use liquid or aerosol cleaners.

Useadampclothforcleaning.

Follow all warnings and instructions marked on the

projector.

For added protection to the projector during a lightning

storm,orwhenitisleftunattendedandunusedforlong

periods of time, unplug it from the wall outlet. This will

preventdamageduetolightningandpowerlinesurges.

Do not expose this unit to rain or use near water... for

example, in a wet basement, near a swimming pool,

etc...

Do not use attachments not recommended by the

manufacturerastheymaycausehazards.

Do not place this projector on an unstable cart, stand,

or table. The projector may fall, causing serious injury

toachildoradult,andseriousdamagetotheprojector.

Use only with a cart or stand recommended by the

manufacturer, or sold with the projector. Wall or shelf

mounting should follow the manufacturer’s instructions,

and should use a mounting kit approved by the

manufacturers.

An a p p liance and cart combination

should be moved with care. Quick stops,

excessive force, and uneven surfaces

ma y c au s e t he a pp li a nc e a nd c ar t

combinationtooverturn.

Slotsandopeningsinthebackandbottomofthecabinet

are provided for ventilation, to ensure reliable operation

oftheequipmentandtoprotectitfromoverheating.

The openings should never be covered with cloth or

other materials, and the bottom opening should not be

blocked by placing the projector ona bed,sofa, rug, or

other similar surface. This projector should never be

placednearoroveraradiatororheatregister.

This projector should not be placed in a built-in

installationsuchasabookcaseunlessproperventilation

isprovided.

Never push objects of any kind into this projector

through cabinet slots as they may touch dangerous

voltage points or short out parts that could result in a

fireorelectricshock.Neverspillliquidofanykindonthe

projector.

Do not install the projector near the ventilation duct of

air-conditioningequipment.

This projector should be operated only from the type

of power source indicated on the marking label. If you

arenotsureofthetypeofpowersupplied,consultyour

authorizeddealerorlocalpowercompany.

Donotoverloadwalloutletsandextensioncordsasthis

canresultinfireorelectricshock.Donotallowanything

to rest on the power cord. Do not locate this projector

wherethecordmaybedamagedbypersonswalkingon

it.

Do not attempt to service this projector yourself as

opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing

toqualifiedservicepersonnel.

Unplugthisprojectorfromwalloutletandreferservicing

to qualified service personnel under the following

conditions:

a.Whenthepowercordorplugisdamagedorfrayed.

b.Ifliquidhasbeenspilledintotheprojector.

c.Iftheprojectorhasbeenexposedtorainorwater.

d.Iftheprojectordoesnotoperatenormallybyfollowing

the operating instructions.Adjust only those controls

that are covered by the operating instructions as

improper adjustment of other controls may result in

damage and will often require extensive work by a

qualifiedtechnician torestorethe projectorto normal

operation.

e.If the projector hasbeen dropped or the cabinet has

beendamaged.

f.When the projector exhibits a distinct change in

performance-thisindicatesaneedforservice.

When replacement parts are required, be sure the

servicetechnicianhasusedreplacementpartsspecified

by the manufacturer that havethe same characteristics

as the original part. Unauthorized substitutions may

resultinfire,electricshock,orinjurytopersons.

Upon completion of any service or repairs to this

projector, ask the service technician to perform routine

safety checks to determine that the projector is in safe

operatingcondition.

Safety Instructions

Openingsinthe cabinetareprovidedfor ventilation.To

ensurereliableoperationoftheproductandtoprotectit

from overheating, these openings must not be blocked

orcovered.

CAUTION

Hotairisexhaustedfromtheexhaustvent.Whenusing

or installing the projector, the following precautions

shouldbetaken.

–Donotputanyflammableobjectorspraycannearthe

projector,hotairisexhaustedfromtheairvents.

–Keeptheexhaustventatleast3’(1m)awayfromany

objects.

–Do not touch a peripheral part of the exhaust vent,

especiallyscrewsandmetallicparts.Theseareaswill

becomehotwhiletheprojectorisbeingused.

–Donotputanythingonthecabinet.Objectsputonthe

cabinetwillnotonlygetdamagedbutalsomaycause

firehazardbyheat.

Cooling fans are provided to cool down the projector.

The fans’ running speed is changed according to the

temperatureinsidetheprojector.

CAUTION IN CARRYING OR TRANSPORTING

THE PROJECTOR

–Donotdroporbumptheprojector,otherwisedamages

ormalfunctionsmayresult.

–Whencarryingtheprojector,useasuitablecarrying

case.

–Donot transport theprojectorbycourier or anyother

transportserviceinanunsuitabletransportcase.This

may cause damage to the projector. For information

abouttransportingtheprojectorbycourieroranyother

transportservice,consultyourdealer.

–Donotputtheprojectorinacasebeforetheprojector

iscooledenough.

Moving the Projector

When moving the projector, replace the Lens Cap and

retract adjustable feet to prevent damage to the lens

andcabinet.

Whentheprojectorisnotinuseforanextendedperiod,

putit into thesuppliedcarrying casewiththe lens side

up.

CAUTION

The carrying case (supplied) is intended for protection

against dust and scratches on surface of the cabinet,

and it is not designed to protect an appliance from

externalforces.Donottransporttheprojectorbycourier

or any other transport service with this case, otherwise

the projector can be damaged. When handling the

projector,donotdrop,bump,subjectittostrongforces,

orputotherthingsonthecabinet.

AirIntakeVent

ExhaustVent

(Hotairexhaust)

AirIntakeVent

Air Circulation

AirIntakeVent

Safety Instructions

Usetheprojectorproperlyinspecifiedpositions.Improperpositioningmayreducethelamplifeandresultinsevere

accidentorfirehazard.

Thisprojectorcanprojectthepictureupward,downward,orbackward,perpendiculartotheplaneofthescreenas

showninthefigurebelow.

Bottom

Downward

(Usual)

Front

Downward

Bottom

Upward

Front

Upward

Installing the Projector in Proper Directions

Avoidpositioningtheprojectorasdescribedbelowwheninstalling.

Positioning Precautions

Donotrolltheprojectormorethan10degreesfromsidetoside.

Donotputtheprojectoroneithersidetoprojectanimage.

10˚

10˚ 10

10˚

Inupwardprojection,donottilttheprojectorover10degreesrightandleft.

Indownwardprojection,donottilttheprojectorover10degreesrightandleft.

0º

180º

0º

180º

-50º

GOOD

+50º

40º

50º50º

40º

BesuretosettheLampcontrolinHighandtheFancontrolinOn3inthe

settingmenuwhenusingtheprojectorinclinedatbetween+40degrees

to+140degreestothehorizontalplaneataltitudesbetween0and

approximately1,600metersabovesealevel.

BesuretosettheFancontrolinOn2whenusingtheprojectorathigher

altitudesthanthealtitudesdescribedabove,regardlessoftheinstallation

positionoftheprojector.(p.56).

Compliance

Federal Communications Commission Notice

Note:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses, and can radiate radio frequency

energy, and if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does causeharmful interferenceto radioor television reception, which canbe

determinedbyturningtheequipmentoffandon,theuserisencouraged totrytocorrecttheinterferenceby

oneormoreofthefollowingmeasures:

 –Reorientorrelocatethereceivingantenna.

 –Increasetheseparationbetweentheequipmentandreceiver.

 –Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.

 –Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

UseofshieldedcableisrequiredtocomplywithclassBlimitsinSubpartBofPart15ofFCCRules.

Donotmakeanychangesormodificationstotheequipmentunlessotherwisespecifiedintheinstructions.If

suchchangesormodificationsshouldbemade,youcouldberequiredtostopoperationoftheequipment.

ModelNumber:PLC-XU115

TradeName :Sanyo

Responsibleparty:SANYOFISHERCOMPANY

Address :21605PlummerStreet,Chatsworth,California91311

TelephoneNo.:(818)998-7322

TheACPowerCordsuppliedwiththisprojectormeetstherequirementforuseinthecountryyoupurchasedit.

AC Power Cord for the United States and Canada:

AC Power Cord used in the United States and Canada is listed by the Underwriters

Laboratories(UL)andcertifiedbytheCanadianStandardAssociation(CSA).

ACPowerCordhasagrounding-typeAClineplug.Thisisasafetyfeaturetobesurethatthe

plugwillfitintothepoweroutlet.Donottrytodefeatthissafetyfeature.Shouldyoubeunable

toinserttheplugintotheoutlet,contactyourelectrician.

GROUND

AC Power Cord Requirement

AC Power Cord for the United Kingdom:

Thiscordisalreadyfittedwithamouldedplugincorporatingafuse,thevalueofwhichisindicatedonthepin

faceoftheplug.Shouldthefuseneedtobereplaced,anASTAapprovedBS1362fusemustbeusedofthe

samerating,markedthus

ASA

.Ifthefusecoverisdetachable,neverusetheplugwiththecoveromitted.Ifa

replacementfusecoverisrequired,ensureitisofthesamecolourasthatvisibleonthepinfaceoftheplug

(i.e.redororange).FusecoversareavailablefromthePartsDepartmentindicatedinyourUserInstructions.

Iftheplugsuppliedisnotsuitableforyoursocketoutlet,itshouldbecutoffanddestroyed.

Theendoftheflexiblecordshouldbesuitablypreparedandthecorrectplugfitted.

WARNING : A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET

OUTLET.

TheWiresinthismainsleadarecolouredinaccordancewiththefollowingcode:

 Green-and-yellow..Earth

 Blue . . . . . . . . . . .Neutral

 Brown . . . . . . . . .Live

Asthecoloursofthewiresinthemainsleadofthisapparatusmaynotcorrespondwiththecolouredmarkings

identifyingtheterminalsinyourplugproceedasfollows:

Thewirewhichiscolouredgreen-and-yellowmustbeconnectedtotheterminalintheplugwhichismarkedby

theletterEorbythesafetyearthsymbol orcolouredgreenorgreen-and-yellow.

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or

colouredblack.

The wire which is coloured brown must be connected to the terminal which is marked with the letter L or

colouredred.

WARNING: THIS APPARATUS MUST BE EARTHED.

THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.

 Kensington Security Slot

Thisslotisfora Kensingtonlockusedtodeter

theftoftheprojector.

 * KensingtonisaregisteredtrademarkofACCOBrands

Corporation.

Bottom

Back

① Infrared Remote Receiver

② WIRELESS Indicator

③ Focus Ring

④ Projection Lens 　

⑤ Zoom Lever

⑥ Lens Cap

⑦ Top Controls and Indicators

⑧ Air Intake Vent

⑨ Exhaust vent

⑩ Speaker

⑪ Air Intake Vent (back and bottom)

⑫ Terminals and Connectors

⑬ Power Cord Connector

⑭ SD Card Slot

⑮ LAN Connection Terminal

⑯ Lamp Cover

⑰ Filters

⑱ Adjustable Feet

⑯

⑮⑭⑬⑪

CAUTION

Hot air is exhausted from the exhaust

vents. Do not put heat-sensitive objects

nearthisside.



Part Names and Functions

⑫

⑰

⑨

⑩

⑪



Note:

② WIRELESS Indicator and ⑮ LAN

Connection Terminal are for the

Network function. Refer to the

owner’s manual “Network Set-up and

Operation”.

⑭ SD Card Slot is for the Memory

Viewer function. Refer to the owner's

manual "Memory Viewer fuction".

CAUTION

Do not turn on a projector with lens cap

attached. High temperature from light

beammaydamagelenscapandresultin

firehazard.

Front

⑱

⑥③ ④ ⑤① ⑦ ⑧②

⑧

Part Names and Functions

Rear Terminal

⑫ S-VIDEO IN

 Connect the S-VIDEO output signal from video

equipmenttothisjack(p.20).

⑨ AUDIO IN

 Connect the audio output signal from video

equipmentconnectedto⑧or⑫tothisjack.Fora

monoaudiosignal(asingleaudiojack),connectit

totheL(MONO)jack(p.20).

⑩ COMPUTER/COMPONENT AUDIO IN

 Connect the audio output (stereo) signal from a

computerorvideoequipmentconnectedto④or⑥

tothisjack(pp.19,21).

⑧ VIDEO IN

 Connect the composite video output signal to this

jack(p.20).

④ COMPUTER IN 2/COMPONENT IN

 Connectthecomputerorcomponentvideo(orRGB

Scart)outputsignaltothisterminal(pp.19,21).

 UsethesuppliedVGAcableoraComponent-VGA

cablecommerciallyavailable.

⑪ AUDIO OUT (VARIABLE)

 Connect an external audio amplifier to this jack

(pp.19–21).

 ThisterminaloutputssoundfromAUDIOINterminal

( ⑨or⑩ ).

① R/C JACK

 When using the wired remote control, connect

thewiredremotecontroltothisjackwitharemote

controlcable(notsupplied).

③ SERVICE PORT

Thisjackisusedtoservicetheprojector.

⑥ COMPUTER IN 1/DVI-I

 Connect computer output (Digital/Analog DVI-I

type)tothisterminal(p.19).

⑬ SD Card Indicator

 Display the status of SD card.When inserting SD

Card, the indicator lights, and when removing SD

Card,theindicatorturnsoff.

⑦ LAN Connection Terminal

 Connect the LAN cable (Refer to the owner's

manualof"NetworkSet-upandOperation".).

① ② ③ ④ ⑤ ⑥

⑦

⑧ ⑨ ⑩

② USB

 In order to operate the computer with the remote

control and use the PAGE

▲▼ buttons on the

remote control during a presentation, connect the

USBportofthecomputertotheUSBterminalwith

aUSBcable(notsupplied)(pp.13,19).

⑤ MONITOR OUT

 This terminal can be used to output the incoming

RGB analog signal from  COMPUTER IN 1 and

COMPUTERIN2/COMPONENTINterminaltothe

othermonitor(p.19).

⑪

⑫

⑬

⑭ SD Card Slot

 Insert the SD card memory (not supplied) for

Memoryvieweroperation.

⑭

Part Names and Functions

Top Control

①

②

④

⑥

⑦

⑧

① LAMP REPLACE indicator

 Lightsyellowwhentheprojectionlampreachesits

endoflife(pp.61,69).

⑦ WARNING indicator

 –Lightsredwhentheprojectordetectsanabnormal

condition.

 –Blinks red when the internal temperature of the

projectorexceedstheoperatingrange(pp.58,69).

② ON/STAND–BY button

Turntheprojectoronoroff(pp.22–23).

⑧ POWER indicator

 –Lightsredwhentheprojectorisinstand-bymode.

 –Lightsgreenduringoperations.

 –BlinksgreeninthePowermanagementmode(p.52).

③ INPUT button

Selectaninputsource(pp.30–31,40–41).

⑩ MENU button

 OpenorclosetheOn-ScreenMenu(p.24).

⑤ POINT▲▼◄► (VOLUME +/–) buttons

 –SelectanitemoradjustthevalueintheOn-Screen

Menu(p.24).

 –PantheimageintheDigitalzoom+mode(p.39).

 –Adjustthevolumelevel(Point

◄►buttons)(p.27).

③

⑤

⑨ AUTO SETUP/CANCEL button

 –Correctverticalkeystonedistortionandadjust

computerdisplayparameterssuchasFinesync.,

Totaldots,andPictureposition(pp.26,47).

 –DisplaytheimageinSDcardorreturntothe

menubarinMemoryViewermenu.

 Refertotheowner'smanualof"NetworkSet-up

andOperation".

⑨

⑩

⑥ SELECT button

 –Executetheselecteditem(p.24).

 –ExpandorcompresstheimageintheDigitalzoom

mode(p.39).

④ KEYSTONE button

Correctkeystonedistortion(pp.26,48).

㉖ NETWORK button

Select the Network input or Memory viewer input.  See

 the owner's manual of

"NetworkSet-upandOperation".

To ensure safe operation, please

observethefollowingprecautions:

–Donotbend,drop,orexposetheremote

controltomoistureorheat.

–For cleaning, use a soft dry cloth. Do

notapplybenzene,thinner,splay,orany

chemicalmaterial.

Remote Control

①

Part Names and Functions

⑤ ②

⑰

③④

② POWER ON/STAND-BY button

 Turntheprojectoronoroff.(pp.22-23)

⑥ VIDEO button

 SelecttheVIDEOinputsource.(p.40)

⑦ COMPUTER button

 SelecttheCOMPUTERinputsource.(pp.30-31,41)

⑭ PAGE ▲▼ buttons

Scrollbackandforththepagesonthescreenwhengivingapresentation.Touse

thesebuttons,connecttheprojectorandyourcomputerwithaUSBcable.(pp.11,

19)

⑧ AUTO PC button

 Automaticallyadjustthecomputerimagetoitsoptimumsetting.(pp.28,33,47)

⑯ D.ZOOM ▲▼ buttons

 Zoominandouttheimages.(pp.28,39)

⑪ MENU button

 OpenorclosetheOn-ScreenMenu.(p.24)

⑰ RESET/ON/ALL-OFF switch

When usingthe remotecontrol, set thisswitch to“ON.” Setitto“ALL OFF”for

power saving whenit is notused. Slide thisswitchto "RESET" toinitialize the

remotecontrolcodeorswitchSpotlightandPointertotheLaserpointerfunction.

(pp.14-15)

⑱ IMAGE button

 Selecttheimagemode.(pp.29,36,43)

⑲

MUTE button

 Mutethesound.(p.27)

⑨

KEYSTONE button

 Correctkeystonedistortion.(pp.26,48)

⑩ Point▲▼◄►(VOLUME

+/–

)

buttons

 –SelectanitemoradjustthevalueintheOn-ScreenMenu.(p.24)

 –PantheimageintheDigitalzoom+mode.(p.39)

 –Adjustthevolumelevel.(Point

◄►buttons)(p.27)

㉑

NO SHOW button

 Temporarilyturnofftheimageonthescreen.(p.29)

⑬ LASER button

–OperatetheLaserpointerfunction.Laserbeamisemittedwhilepressingthis

buttonwithin1minute.Whenusingthislaserpointerformorethan1minute,

releasetheLASERbuttonandpressitagain.(p.14)

–DisplaythePointeronthescreen.(p.14)

① L-CLICK button

Actastheleftmousebuttonforwirelessmouseoperation.(p.15)

④ SIGNAL EMISSION indicator

Lightsredwhilethelaserbeamisbeingemittedfromthelaserlightwindowora

signalisbeingsentfromtheremotecontroltotheprojector.

⑫ FREEZE button

 Freezethepictureonthescreen.(p.28)

⑮ LAMP CONTROL button

 Selectalampmode.(pp.28,53)

⑳

P-TIMER button

 OperatetheP-timerfunction.(p.29)

㉒ R-CLICK button

 Actastherightmousebuttonforwirelessmouseoperation.(p.15)

㉓ SELECT button

 –Executetheselecteditem.(p.24)

– ExpandorcompresstheimageinDigitalzoommode.(p.39)

㉔ PRESENTATION POINTER button

Moveapointeroftheprojectororapointerforwirelessmouseoperation.(pp.14-15)

③ WIRED REMOTE jack

Connecttheremotecontrolcable(notsupplied)tothisjackwhenusingasawired

remote control.Wirelessremotecontroldoesnotworkwhenthe remote control

cableisconnectedtotheprojector

㉕ AUTO SET/CANCEL button

–CorrectverticalkeystonedistortionandadjustthePCdisplayparameters.(pp.26,

47)

–DisplaytheimageinSDcardorreturntothemenubarinMemoryViewermenu.

Refertotheowner'smanualof"NetworkSet-upandOperation".

⑤ LASER LIGHT window

 Alaserbeamisemittedfromhere(p.14).

⑧

⑮

⑪

⑨

⑩

⑭

⑥

⑦

⑫

⑬

⑯

⑳

㉑

⑱

㉓

⑲

㉒

㉔

㉕

㉖

Part Names and Functions

Spotlight

Pointer Function

Pointer

LaserLightWindow

SignalEmissionIndicator

Laser Pointer Function

LASERbutton

PRESENTATIONPOINTER

button

MENUbutton

NOSHOWbutton

This remote control emits a laser beam from the laser light window. Press the LASER button to activate the

laserpointer.Thesignalemissionindicatorlightsredandtheredlaserbeamisemitted.IftheLASERbuttonis

pressedformorethanoneminuteorifitisreleased,thelaserlightgoesoff.

ThelaseremittedisaClassIIlaser.Donotlookintothelaserlightwindoworpointthelaserbeamatyourselfor

otherpeople.Thefollowingisthecautionlabelforthelaserbeam.

CAUTION: Useofcontrols,adjustmentsorperformanceofproceduresotherthanthosespecifiedhereinmay

resultinhazardousradiationexposure.Neverlookdirectlyintothelaserlightwindowwhilealaser

isemitted,otherwiseeyedamagemayresult.

Thecautionlabelisputontheremotecontrol.

You can move the Spotlight or Pointer of the projector with the remote control to emphasize a part of the

projectedimage.

Press and hold the MENU and NO SHOW buttons

for more than 10 seconds to activate the Pointer

function.(TheLaserpointerhasswitchedtothePointer

function.)

Press the LASER button on the remote control

pointing toward the projector.The Spotlight orPointer

is displayed on the screen with the LASER button

lightinggreen.ThenmovetheSpotlightorPointerwith

the PRESENTATION POINTER button. If the LASER

button does not light green and continues to emit a

laser beam, try the abovementioned procedure until

theLASERbuttonlightsgreen.

TocleartheSpotlightorPointeroutthescreen,press

the LASER button pointing toward the projector and

seeiftheLASERbuttonlightingisturnedoff.

To switch to the Laser pointer again, press and hold

the NO SHOW and MENU buttons for more than 10

seconds or slide the RESET/ON/ALL-OFF switch to

“RESET”andthento“ON”.

WhenyouresetthePointerfunction,theremotecontrol

codewillbereset,aswell.

Note:

 •You can choose the size of Spotlight (Large/Middle/

Small) and the pattern of Pointer (Arrow/Finger/Dot) in

theSettingMenu.See“Pointer”onpage53.

Press and hold the MENU

and NO SHOW buttons for

morethan10seconds.

PRESENTATIONPOINTER

button

After the Laser pointer has

switchedto the Pointer,use

the LASER button as the

Pointer function ON-OFF

switch. Press the LASER

button pointing toward the

projector and see if it lights

green.

PRESENTATION POINTER

button

R-CLICK button

L-CLICK button

W h i l e  pre s s i n g t h e

MENU button, press the

IMAGEbuttonnumberof

times corresponding to

theremotecontrolcode.

MENU button

IMAGE button

RESET/ON/ALL-OFF

switch

Remote Control Code

Number of Times

Pressing IMAGE

Button

Code 1 1

Code 2 2

Code 3 3

Code 4 4

Code 5 5

Code 6 6

Code 7 7

Code 8 8

Wireless Mouse Operation

Theremotecontrolcanbeusedasawirelessmouseforyourcomputer.

Actsasleft(click)mouse

buttonwhiletheprojector

and  a computer are

connected with a USB

cable.

Movethepointeronthescreen

withthisbutton.

Acts as right (click) mouse

button while the projector and

acomputerareconnectedwith

aUSBcable.

Theeightdifferentremotecontrolcodes(Code1–Code8)areassignedtothisprojector.Switchingtheremote

control codes prevents interference from other remote controls when several projectors or video equipment

nexttoeachotherareoperatedatthesametime.Changetheremotecontrolcodefortheprojectorfirstbefore

changingthatfortheremotecontrol.See“Remotecontrol”intheSettingMenuonpage53.

Press and hold the MENU and IMAGE buttons for

more thanfive seconds to switchbetween the codes.

The code switches sequentially for one pressing the

IMAGEbutton.Seethelistbelow.

Toinitializetheremotecontrolcode,slidetheRESET/

ON/ALL-OFFswitchto“RESET,”andthento“ON.”The

initialcodeissettoCode1.

Part Names and Functions

Beforeoperatingthewirelessmouse,connect

your computer and the projector with a USB

cable (not supplied). See “Connecting to a

Computer” on page 19. When the Pointer

function is used, the wireless mouse is not

available.

When a USB cable is connected to the

computer and the projector, turn on the

projector first, then the computer. If you turn

on the computer first, the wireless mouse

functionmaynotoperatecorrectly.

Part Names and Functions

Adjustable Feet

Toensuresafeoperation,pleaseobservethefollowingprecautions:

 ● Usetwo(2)AAAorLR03typealkalinebatteries.

 ● Alwaysreplacebatteriesinsets.

 ● Donotuseanewbatterywithausedbattery.

 ● Avoidcontactwithwaterorliquid.

 ● Donotexposetheremotecontroltomoistureorheat.

 ● Donotdroptheremotecontrol.

 ● Ifthebatteryhasleakedontheremotecontrol,carefullywipethecasecleanandinstallnewbatteries.

 ● Riskofanexplosionifbatteryisreplacedbyanincorrecttype.

 ● Disposeofusedbatteriesaccordingtotheinstructions.

Pressthelid

downwardandslideit.

Openthebattery

compartmentlid.

Installnewbatteries

intothecompartment.

Replacethe

compartmentlid.

Two AAA size

batteries

Forcorrectpolarity

(+and–),besure

batteryterminalsare

incontactwithpinsin

compartment.

1 2 3

Point the remote control toward the projector (Infrared

Remote Receiver) when pressing the buttons. Maximum

operating range for the remote control is about 16.4'(5 m)

and60degreesinfrontoftheprojector.

Remote Control Operating Range

Remote Control Battery Installation

Projectionanglecanbeadjustedupto8.9degreeswiththe

adjustablefeet.

Liftthefrontoftheprojectorandpullthefeetlocklatcheson

bothsideoftheprojectorupward.

Releasethefeetlocklatchestolocktheadjustablefeetand

rotatetheadjustablefeettoaproperheight,andtilt.

Keystone distortion can be adjusted automatically with the

Autosetupfunctionormanuallybyusingtheremotecontrol

orthemenuoperation(seepages26,47-48).

AdjustableFeet FeetLockLatches

16.4'

(5m)

30°

Remotecontrol

30°

Positioning the Projector

Forprojectorpositioning,seethefiguresbelow.Theprojectorshouldbesetperpendicularlytotheplaneofthe

screen.

Notes:

 •The brightness in the room has a great influence on picture quality. It is recommended to limit ambient

lightinginordertoobtainthebestimage.

 •Allmeasurementsareapproximateandmayvaryfromtheactualsizes.

Installation

Screen Size

(W x H) mm

4 : 3 aspect ratio

Zoom (min)

40”

Zoom (max)

813 x 610

4.9’ (1.5m)

3.0’ (0.9m)

100”

2032 x 1524

12.5’ (3.8 m)

7.9’ (2.4 m)

150”

3048 x 2286

18.7’ (5.7 m)

11.8’ (3.6 m)

200”

4064 x 3048

24.9’ (7.6 m)

15.7’ (4.8 m)

300”

6096 x 4572

37.4’(11.4m)

23.6’ (7.2 m)

100"

150"

200"

300"

189"

126"

95"

64"

40"

3.0’ (0.9 m)

7.9’ (2.4 m)

11.8’ (3.6 m)

15.7’ (4.8 m)

37.4’ (11.4 m)

A：B ＝ 9 ：1

Max. Zoom

Min. Zoom

23.6’ (7.2 m)

Installation

Connecting the AC Power Cord

This projector uses nominal input voltages of 100-120 V

or 200–240 VAC and it automatically selects the correct

inputvoltage.Itisdesignedtoworkwithsingle-phasepower

systems having a grounded neutral conductor. To reduce

theriskofelectricalshock,donotplugintoanyothertypeof

powersystem.

If you are not sure of the type of power being supplied,

consultyourauthorizeddealerorservicestation.

Connect the projector with all peripheral equipment before

turningtheprojectoron.

CAUTION

TheAC outlet must be near this equipment and must be

easilyaccessible.

Notes:

Unplug theAC power cord when the projector is not in

use.Whenthisprojectorisconnectedtoanoutletwiththe

AC power cord, it is in Stand-by mode and consumes a

littleelectricpower.

TotheACoutlet.

(200 - 240 V AC)

NOTE ON THE POWER CORD

ACpowercordmustmeetrequirementofthecountrywhereyouusetheprojector.

ConfirmtheACplugtypewiththechartbelowandproperACpowercordmustbeused.

IfsuppliedACpowercorddoesnotmatchyourACoutlet,contactyoursalesdealer.

Topowercord

connectoronyour

projector.

Projector side

AC outlet side

Ground

TotheACoutlet.

(120 V AC)

For the U.S.A. and Canada

TotheACoutlet.

(200 - 240 V AC)

For the U.K.

For Continental Europe

ConnecttheACpowercord(supplied)to

theprojector.

Installation

Connecting to a Computer

KB3AC

Cables used for connection

•VGACable(MiniD-sub15pin)*

•DVI-VGACable

•DVICable

•USBCable

•AudioCables

(*Onecableissupplied;othercablesarenotsuppliedwiththeprojector.)

ExternalAudioEquipment

DVI-VGA

cable

USBcable

Audiocable

(stereo)

USBportAudioOutput

USB

COMPUTER/

COMPONENT

AUDIOIN

AUDIOOUT

(stereo)

AudioInput

COMPUTERIN1

DVI-I

Notes:

•Input sound to the COMPUTER/COMPONENTAUDIOIN

terminal when using the COMPUTER IN 1/DVI-I and the

COMPUTERIN2/COMPONENTINterminalasinput.

 •When theAUDIO OUT is plugged-in, the projector's built-in

speakerisnotavailable.

 •USBcableconnectionisneededwhenoperatingthecomputer

withtheremotecontrolorusingthePAGE▲▼buttonsonthe

remotecontrol.

Monitor

Output

COMPUTERIN2/

COMPONENT

VGAcable

MONITOR

OUT

Audiocable

(stereo)

Unplug the power cords of both the

projector and external equipment

fromtheAC outlet before connecting

cables.

VGAcable

Monitor

Output

Monitor

Input

DVI

cable

Monitor

Output

Installation

Connecting to Video Equipment

Cables used for connection

•VideoandAudioCable(RCAx3)

•S-VIDEOCable

•AudioCable

(Cablesarenotsuppliedwiththeprojector.)

ExternalAudioEquipment

Unplug the power cords of

both the projector and external

equipment from the AC outlet

beforeconnectingcables.



Notes:

• WhentheAUDIOOUTisplugged-in,theprojector'sbuilt-

inspeakerisnotavailable.

 •The S-VIDEO jack connection overrides the VIDEO

jackconnectionwhenselectingAUTOintheInputMenu

(p.40).

KB3AC

AUDIO OUT

(stereo)

S-videocable

Videoandaudiocable

VIDEO

S-VIDEOAUDIOIN

CompositeVideoandAudioOutput

S-videoOutput

(R)(L)(Video)

Audiocable

(stereo)

AudioInput

Page is loading ...

Sanyo PLC XU115 - XGA LCD Projector User manual

Brand: Sanyo

Model: PLC XU115 - XGA LCD Projector

Category: Data projectors

Type: User manual

This manual is also suitable for

PLC-XU115

Download PDF

report

Sanyo PLC XU115 - XGA LCD Projector User manual

This manual is also suitable for

Sanyo PLC XU115 - XGA LCD Projector User manual

Related papers

Other documents