Felix Storch SENTOMAT 87254 User manual

Brand: Felix Storch

Model: SENTOMAT 87254

Type: User manual

This manual is also suitable for

Felix Storch SENTOMAT 87254

Single Sentomat Ketchup

The Felix Storch SENTOMAT 87254 is a single-serving ketchup dispenser that is perfect for home or commercial use. It is easy to use and clean, and it can be used to dispense ketchup, mayonnaise, or mustard.

The SENTOMAT 87254 is made of durable plastic and has a capacity of 1 liter. It features a pump mechanism that dispenses the perfect amount of ketchup with each pump. The dispenser also has a transparent cover that allows you to see how much ketchup is left.

Felix Storch SENTOMAT 87254

Single Sentomat Ketchup

INSTRUCTION MANUAL

87254

Single Sentomat Ketchup

87255

Single Sentomat Mustard

87257

Single Sentomat

Mayonnaise

SENTOMAT DISPENSERS

Anleitung_EN_17102011.indd 1 17.10.11 15:58

1. Preparation

a. Opening the valves ( gure 1a)

Remove the spout and the upper back-pressure valve (8376) and brie y press together the opening lips of the spout and the

back-pressure valve (8375) to open up the outlet. This step is necessary, because otherwise there will be no pump e ect. Now

mount the back-pressure valve  rst and then the spout back onto the pump tube.

b. Correct position of the lower back-pressure valve ( gure 1b)

Make sure the lower back-pressure valve (7980) is positioned correctly:

For ketchup the arrow on the pump tube (8374) should point to the letter A* (marked on the lower back-pressure valve),

for more viscous products (mustard, mayonnaise) to the letter B** (marked on the lower back-pressure valve). Fix the back-

pressure valve by folding up both  aps and hooking them into the  xing pins on the pump tube.

*Position A: ideal for ketchup (= factory setting), **Position B: ideal for mustard and mayonnaise (= factory setting))

2. Connecting the bag ( gure 2)

Lay the full bag on a  at surface with the opening punched in white pointing

upwards. Press the connection piece of the pump tube forcefully into the

opening until it clicks into place (see  gure 2). After connecting it, press some

ketchup/mayonnaise/mustard into the pump tube (8374) by pressing  rmly

on the bag or the dome. This will make the  rst pumping easier.

3. Assembling the bag and the pump ( gure 3)

Lift the bag and the pump with both hands and let the bag slide into the

container with the spout (8376) at the top. Position the spout so that it lies in

the indention in the colored part of the container.

A or B

8373 Complete pump mechanism

8376 Spout

8375 Upper back-pressure valve

8374 Pump tube Ø11.5mm

7979 Dome

7978 Verschlussring

7980 Lower back-pressure valve

(Position A or B)

Connection piece

8367 Lid including transparent cover 8369 Transparent cover Complete container

Anleitung_EN_17102011.indd 2 17.10.11 15:58

4. Attaching the lid (gure 4)

Hold the gray pump arm up as high as possible. Put the lid on the

container so that the ap at the back is inserted into the indention in the

container (a). Now press the lid at the front until it snaps shut (b). The

spout has to be connected rmly with the lid.

Press the arm a few times until some of the product comes out of the

spout. The dispenser is now ready for use.

5. Attaching/removing the transparent cover for labeling

or cleaning (gure 5)

Slide the transparent cover to the front by positioning both thumbs on

the ribbed areas and take o the cover. Position the enclosed label on the

upper side of the lid, replace the cover and let it snap into place.

6. Taking o the lid (gure 6)

Press the ap on the back side of the container and lift o the lid.

7. Cleaning

Remove the empty bag from the pump container. Take apart the pump

into its various components (gures 1 + 7). We recommended cleaning

the pump every time you change the bag. All parts are washable.

Please use the enclosed brush. We recommend disinfecting all parts that

come into contact with the product.

8. Assembling the pump (gures 1+7)

a. Ax the dome (7979) to the pump tube (8374) and attach securely by

turning the lock ring (7978) until it snaps into place. (gure 7)

b. Insert the upper back-pressure valve (8375) into the intake of the

pump tube as far as possible. Press the opening lip of the upper back-

pressure valve briey to open the outlet.

c. Slide the spout (8376) over the upper back-pressure valve (8375).

Once again, press the opening lip briey to open up the outlet.

The step is necessary to retain the pump eect.

d. Insert the lower back-pressure valve (7980) into the lower opening

of the pump tube. Two positions are possible for the lower back-pressure

valve depending on the viscosity of the product: for products with low

viscosity, such as ketchup, the arrow on the pump tube should point to the letter A* (marked on the lower back-pressure

valve), for more viscous products (mustard, mayonnaise) to the letter B** (marked on the lower back-pressure valve).

Ax the back-pressure valve by folding up both aps and hitching them to the xing pins on the pump tube. (See gure 1 b).

*Position A: ideal for ketchup (= factory setting), **Position B: ideal for mustard and mayonnaise (= factory setting)

Remark: Do not position dispensers right next to the oven or deep fryer.

Anleitung_EN_17102011.indd 3 17.10.11 15:58

For questions concerning the operation of the dispensers or to order spare parts, please contact:

Felix Austria GmbH:

Tel.: 02626/610-26, Fax: 02626/610-94

Email: [email protected]

An instruction manual is also available at: www.felix.at/Sentomat

Produced by Asept International AB

www.asept.com

Anleitung_EN_17102011.indd 4 17.10.11 15:58

Felix Storch SENTOMAT 87254 User manual

Brand: Felix Storch

Model: SENTOMAT 87254

Type: User manual

This manual is also suitable for

Felix Storch SENTOMAT 87254

Single Sentomat Ketchup

Download PDF

report

Felix Storch SENTOMAT 87254 User manual

This manual is also suitable for

Felix Storch SENTOMAT 87254 User manual

Other documents