IMPORTANT SAFEGUARDS
19. Moving Parts - Keep fingers out of feed and discharge openings.
20. Sharp Blade - Never use slicer unless completely assembled.
21. Do not place on or near a hot gas or electric burner or on a hot oven.
22. Turn the appliance OFF, then unplug from the outlet when not in use, before
assembling or disassembling parts and before cleaning. To unplug, grasp the plug
and pull from the outlet. Never pull from the power cord.
FOR USA AND CANADA ONLY
For all other models: To reduce the risk of electric shock, this equipment has a pola-
rized plug (one blade is wider than the other). This plug will fit in a polarized outlet
only in one way. If the plug does not fit fully in the outlet, reverse the plug. Do not
change the plug in any way. If it still does not fit, contact a qualified electrician.
The electrical rating listed on the unit is based on the attachment that draws the
greatest load.
Other attachments might draw significantly less power or current.
ELECTRICAL WIRING
3
23. Do not use appliance for other than intented use.
24. Never add to container while appliance is operating.
25. Always make sure juicer is clamped securely in place before motor is turned ON.
Do not unfasten clamps while juicer is in operation.
26. Be sure to turn switch to OFF position after each use of your juicer. Make sure the
motor stops completely before disassembling.
27. Do not put your fingers or other objects into the juicer opening while it is in
operation. If food becomes lodged in opening, use food pusher or another piece
of fruit or vegetable to push it down. When this method is not possible, turn the
motor OFF and dissasemble the juicer to remove the remaining food.
28. Unplug before cleaning and before assembling or removing parts. Do not fill the
bowl above the marking maximum fill line (or rated capacity) to avoid risk of
injury due to damage to the cover or bowl.
29. For chrome plated models only: To reduce the risk of electric shock, this equipment
has a grounding type plug, with a third (grounding) pin. This plug will only fit
into a grounded outlet. If the plug does not fit into the outlet, contact a qualified
electrician
to install the proper outlet. Do not change the plug in any way.
CAUTION : To ensure continued protection against risk of electric shock connect
to properly grounded outlets only.
SAVE THESE INSTRUCTIONS