JVC AV-32S776, AV-32S766, AV-30W776, AV-27S776 User manual

Category
LCD TVs
Type
User manual
LCT1855-001B-A
0805JGI-II-IM
Model Number:
Serial Number:
Illustration of AV-30W776 and RM-C1270G
Color Television Users Guide
POWER
THEATER PRO
VIDEO STATUS
SLEEP
TIMER
FAVORITE
SUB CH
1
7
4
TUNE
3
9
6
RETURN+
/TV
MUTING
MENU
OK
BACK
2
8
0
5
CH +
VOL
VOL
+
REC
OPEN/CLOSE
STILL/PAUSE
STOP PAUSE
PLAY FFREW
TV
CATV VCR
DVD
VCR CHANNEL
PREV NEXT
TV/VCR
VCR/DVD
POWER
ASPECT
CH –
TV
RM-C1270G
ML/MTS SOUND GUIDE
DISPLAY C.C. D/A
INPUT
Important Note:
In the spaces below, enter the model and serial number of your television (located
at the rear of the television cabinet). Staple your sales receipt or invoice to the
inside cover of this guide. Keep this user’s guide in a convenient place for future
reference. Keep the carton and original packaging for future use.
For Models:
AV-32S776
AV-32S766
AV-30W776
AV-27S776
LCT1855 "B" English 1LCT1855 "B" English 1 10/3/05 10:23:52 AM10/3/05 10:23:52 AM
2
Important Safety Precautions
WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS TV
SET TO RAIN OR MOISTURE.
CAUTION: TO INSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES
REGARDING THE USE OF THIS UNIT.
1. Operate only from the power source specified on the unit.
2. Avoid damaging the AC plug and power cord.
3. Avoid Improper installation and never position the unit where good ventilation is unattainable.
4. Do not allow objects or liquid into the cabinet openings.
5. In the event of trouble, unplug the unit and call a service technician. Do not attempt to repair
it yourself or remove the rear cover.
Changes or modifications not approved by JVC could void the warranty.
* When you don’t use this TV set for a long period of time, be sure to disconnect both the
power plug from the AC outlet and antenna for your safety.
* To prevent electric shock do not use this polarized plug with an extension cord, receptacle or
other outlet unless the blades can be fully inserted to prevent blade exposure.
CAUTION: To reduce the risk of electric shock. Do not
remove cover (or back). No user serviceable
parts inside. Refer servicing to qualified service
personnel.
The lightning flash with arrowhead symbol, within an
equilateral triangle is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
IMPORTANT RECYCLING INFORMATION
This product utilizes both a Cathode Ray Tube (CRT) and other components that
contain lead. Disposal of these materials may be regulated in your community due to
environmental considerations. For disposal or recycling information, please contact
your local authorities, or the Electronic Industries Alliance: http://www.eiae.org
LCT1855 "B" English 2LCT1855 "B" English 2 10/3/05 10:23:59 AM10/3/05 10:23:59 AM
3
CAUTION:
Please read and retain for your safety.
Electrical energy can perform many useful functions. This TV set has been engineered and
manufactured to assure your personal safety. But improper use can result in potential
electrical shock or fire hazards. In order not to defeat the safeguards incorporated in this
TV set, observe the following basic rules for its installation, use and servicing. Also follow all
warnings and instructions marked on your TV set.
INSTALLATION
1 Your TV set is equipped with a polarized AC line plug (one
blade of the plug is wider than the other). This safety feature
allows the plug to fit into the power outlet only one way.
Should you be unable to insert the plug fully into the outlet,
try reversing the plug. Should it still fail to fit, contact your
electrician.
2 Operate the TV set only from a power source as indicated on the TV set or refer to the
operating instructions for this information. If you are not sure of the type of power supply to
your home, consult your TV set dealer or local power company. For battery operation, refer
to the operating instructions.
3 Overloaded AC outlets and extension cords are dangerous, and so are frayed power cords
and broken plugs. They may result in a shock or fire hazard. Call your service technician for
replacement.
4 Do not allow anything to rest on or roll over the power cord, and do not place the TV set
where power cord is subject to traffic or abuse. This may result in a shock or fire hazard.
5 Do not use this TV set near water — for example, near a bathtub, washbowl, kitchen sink, or
laundry tub, in a wet basement, or near swimming pool, etc.
6 If an outside antenna is connected to the TV set, be sure the antenna system is grounded
so as to provide some protection against voltage surges and built-up static charges.
Section 810 of the National Electrical Code provides information with respect to proper
grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location of antenna discharge unit, connection
requirements for the grounding electrode.
(POLARIZED-TYPE)
Important Safeguards
As an “ENERGY STAR
®
” partner,
JVC has determined that this
product or product model meets the
“ENERGY STAR
®
” guidelines for energy
efficiency.
LCT1855 "B" English 3LCT1855 "B" English 3 10/3/05 10:23:59 AM10/3/05 10:23:59 AM
4
7 An outside antenna system should not be located in the vicinity of overhead power lines
or other electric light or power circuits, or where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be fatal.
8 TV sets are provided with ventilation openings in the cabinet to allow heat generated during
operation to be released.
Therefore:
Never block the bottom ventilation slots of a portable TV set by placing it on a bed, sofa,
rug, etc.
Never place a TV set in a “built-in” enclosure unless proper ventilation is provided.
— Never cover the openings with a cloth or other material.
— Never place the TV set near or over a radiator or heat register.
9 To avoid personal injury:
— Do not place a TV set on a sloping shelf unless properly secured.
Use only a cart or stand recommended by the TV set manufacturer.
Do not try to roll a cart with small casters across thresholds or deep pile carpets.
Wall or shelf mounting should follow the manufacturer’s instructions, and should use a
mounting kit approved by the manufacturer.
10 Caution children about dropping or pushing objects into the TV set through cabinet
openings. Some internal parts carry hazardous voltages and contact can result in a fire or
electrical shock.
11 Unplug the TV set from the wall outlet before cleaning. Do not use liquid or an aerosol
cleaner.
12 Never add accessories to a TV set that has not been designed for this purpose. Such
additions may result in a hazard.
GROUND
CLAMP
ELECTRICAL
SERVICE
EQUIPMENT
NEC - NATIONAL ELECTRIC CODE
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ARTICLE 250, PART H)
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
Use
LCT1855 "B" English 4LCT1855 "B" English 4 10/3/05 10:23:59 AM10/3/05 10:23:59 AM
5
13 For added protection of the TV set during a lightning storm or when the TV set is to be left
unattended for an extended period of time, unplug it from the wall outlet and disconnect the
antenna. This will prevent damage to product due to lightning storms or power line surges.
14 A TV set and cart combination should be moved with care. Quick stops, excessive force,
and uneven surfaces may cause the TV set and cart combination to overturn.
15 Unplug this TV set from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the TV set.
C. If the TV set has been exposed to rain or water.
D. If the TV set does not operate normally by following the operating instructions. Adjust
only those controls that are covered in the operating instructions as improper adjustment
of other controls may result in damage and will often require extensive work by a
qualified technician to restore the TV set to normal operation.
E. If the TV set has been dropped or damaged in any way.
F. When the TV set exhibits a distinct change in performance — this indicates a need for
service.
16 Do not attempt to service this TV set yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
17 When replacement parts are required, have the service technician verify in writing that the
replacement parts he uses have the same safety characteristics as the original parts. Use
of manufacturer’s specified replacement parts can prevent fire, shock, or other hazards.
18 Upon completion of any service or repairs to this TV set, please ask the service technician
to perform the safety check described in the manufacturer’s service literature.
19 When a TV set reaches the end of its useful life, improper disposal could result in a picture
tube implosion. Ask a qualified service technician to dispose of the TV set.
20 Note to CATV system installer.
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of
the NEC that provides guidelines for proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system of the building, as close to the
point of cable entry as practical.
PORTABLE CART WARNING
(Symbol provided by RETAC)
Service
LCT1855 "B" English 5LCT1855 "B" English 5 10/3/05 10:24:00 AM10/3/05 10:24:00 AM
6
Table of Contents
Unpacking your TV . . . . . . . . . . . . 8
TV Models . . . . . . . . . . . . . . . . 9
TV Remote Control . . . . . . . . . . . 11
Getting Started . . . . . . . . . . . . . 12
The Remote Control . . . . . . . . . . 12
Connecting Your Devices . . . . . . . 13
Interactive Plug In Menu . . . . . . . . 20
Setting CATV, VCR and DVD Codes . . . 23
CATV or Satellite Codes . . . . . . . . 23
VCR Codes . . . . . . . . . . . . . . 24
DVD Codes . . . . . . . . . . . . . . 25
Search Codes . . . . . . . . . . . . . 26
Using the Guide . . . . . . . . . . . . . 27
Onscreen Menu System . . . . . . . . . 28
Auto Tuner Setup . . . . . . . . . . . . 30
Channel Summary . . . . . . . . . . . . 30
V-Chip . . . . . . . . . . . . . . . . . . 32
Set Lock Code . . . . . . . . . . . . . 38
Language . . . . . . . . . . . . . . . . 39
Closed Caption . . . . . . . . . . . . . 40
Auto Shut Off . . . . . . . . . . . . . . 42
XDS ID . . . . . . . . . . . . . . . . . 42
Tilt Correction . . . . . . . . . . . . . . 42
Noise Muting . . . . . . . . . . . . . . 43
Front Panel Lock . . . . . . . . . . . . 43
V1 Smart Input . . . . . . . . . . . . 44
Video Input Label . . . . . . . . . . . . . 44
Position Adjustment . . . . . . . . . . . . 45
Digital-In . . . . . . . . . . . . . . . . . 46
Digital-In Audio . . . . . . . . . . . . . 46
Picture Settings . . . . . . . . . . . . . 47
Adjust Picture Settings . . . . . . . . . 47
Color Temperature . . . . . . . . . . . . 47
Digital Noise Clear . . . . . . . . . . . . 47
Natural Cinema . . . . . . . . . . . . . 48
VSM . . . . . . . . . . . . . . . . . . . 48
Reset . . . . . . . . . . . . . . . . . . 48
Sound Settings . . . . . . . . . . . . . 49
Adjust Sound Settings . . . . . . . . . 49
Reset . . . . . . . . . . . . . . . . . . 49
Set Clock . . . . . . . . . . . . . . . . 50
On/Off Timer . . . . . . . . . . . . . . . 51
Power . . . . . . . . . . . . . . . . . . 52
Number Buttons . . . . . . . . . . . . . 52
Tune . . . . . . . . . . . . . . . . . . 52
Input . . . . . . . . . . . . . . . . . . . 52
Channel +/- . . . . . . . . . . . . . . 52
Volume +/- . . . . . . . . . . . . . . . 52
Return+/TV . . . . . . . . . . . . . . . 53
Sound . . . . . . . . . . . . . . . . . . 53
Muting . . . . . . . . . . . . . . . . . . 53
Video Status . . . . . . . . . . . . . . . 54
TheaterPro D6500K . . . . . . . . . . . 54
Sleep Timer . . . . . . . . . . . . . . . 54
Display . . . . . . . . . . . . . . . . . 55
C.C. . . . . . . . . . . . . . . . . . . . 55
Aspect . . . . . . . . . . . . . . . . . 56
Aspect Ratios . . . . . . . . . . . . . 56
Favorite . . . . . . . . . . . . . . . . . . . 59
ML/MTS . . . . . . . . . . . . . . . . . . . 60
Menu . . . . . . . . . . . . . . . . . . 60
OK . . . . . . . . . . . . . . . . . . . 60
Back . . . . . . . . . . . . . . . . . . . 60
TV/CATV Slide Switch . . . . . . . . . . 61
VCR/DVD Slide Switch . . . . . . . . . 61
VCR Buttons . . . . . . . . . . . . . . . 61
DVD Buttons . . . . . . . . . . . . . . . 61
Quick Setup . . . . . . . . . . . 8
Remote Programming . . . . . 23
Onscreen Menus . . . . . . . . 27
Button Functions . . . . . . . 52
Initial Setup . . . . . . . . . . 30
Clock Timers . . . . . . . . . . 50
Picture Adjust . . . . . . . . . 47
Sound Adjust . . . . . . . . . 49
LCT1855 "B" English 6LCT1855 "B" English 6 10/3/05 10:24:00 AM10/3/05 10:24:00 AM
7
Table of Contents
Digital Setup . . . . . . . . . . . . . 62
Antenna Level . . . . . . . . . . . . . 62
Digital Sound . . . . . . . . . . . . . 63
Software Update . . . . . . . . . . . . 64
Software Version . . . . . . . . . . . 64
Digital CH D/A (Digital/Analog) . . . . . 65
Sub Channel . . . . . . . . . . . . . 65
Guide . . . . . . . . . . . . . . . 66
Weak Signal . . . . . . . . . . . . . 67
No Program . . . . . . . . . . . . . . 67
Troubleshooting . . . . . . . . . . . . . 68
Warranty . . . . . . . . . . . . . . 69
Authorized Service Centers . . . . . . . 70
Specifications . . . . . . . . . . . . . 71
Notes . . . . . . . . . . . . . . . . . 75
Digital Button Functions . . . 65
Digital Setup . . . . . . . . . 62
Appendices . . . . . . . . . . 68
OSD Information . . . . . . . . 67
LCT1855 "B" English 7LCT1855 "B" English 7 10/3/05 10:24:00 AM10/3/05 10:24:00 AM
8
Two AA
Batteries
1 Television
1 Remote Control
Used to connect an
external antenna or
cable TV system to
your TV.
Used to make video
connections with S-Video
VCRs, Camcorders and
DVD players.
We recommend that before you start using your new television, you read your entire User’s
Guide so you can learn about your new television’s many great features. If you’re anxious to
start using your television right away, a quick setup guide follows on the next few pages.
Quick Setup Unpacking your TV
Thank you for your purchase of a JVC Color Television. Before you begin setting up your new
television, please check to make sure you have all of the following items. In addition to this
guide, your television box should include:
Once you have unpacked your television, the next step is to connect it to your antenna/
cable or satellite system and to connect the audio/video devices you want to use with your
television. To make these connections you will use plugs like the ones illustrated below.
Coaxial Cables
S-Video Cable
Used to connect audio/
video devices like
VCRs, DVD players,
stereo amplifiers, game
consoles, etc.
Component Cables
Composite Cables
Audio Cables
POWER
THEATER PRO
VIDEO STATUS
SLEEP
TIMER
FAVORITE
SUB CH
1
7
4
TUNE
3
9
6
RETURN+
/TV
MUTING
MENU
OK
BACK
2
8
0
5
CH +
VOL
VOL
+
REC
OPEN/CLOSE
STILL/PAUSE
STOP PAUSE
PLAY FFREW
TV
CATV VCR
DVD
VCR CHANNEL
PREV NEXT
TV/VCR
VCR/DVD
POWER
ASPECT
CH –
TV
RM-C1270G
ML/MTS SOUND GUIDE
DISPLAY C.C. D/A
INPUT
AA Alkaline
AA Alkaline
Note: Your television
and/or remote
control may differ
from the examples
illustrated here.
LCT1855 "B" English 8LCT1855 "B" English 8 10/3/05 10:24:00 AM10/3/05 10:24:00 AM
9
Quick Setup TV Models
NOTE: Before you connect your television to another device, please refer to the proper
diagrams for your specific TV and remote. These will help assist you in understanding
how to connect your television to another device, as well as use the remote to set up
your television.
Rear Panel Diagram
MODELS : AV-32S776, AV-32S766, AV-30W776, AV-27S776
SERVICE
ONLY
UNPLUG THE POWER CORD FROM
AC OUTLET BEFORE REMOVING THE
REAR COVER
When the rear cover is removed, follow
"CAUTION AT DISASSEMBLY" procedure in
the service manual before plugging the TV's
power cord into an AC outlet. Failure to
follow the procedure will result in
PERMANENT damage to some of the
television features.
DÉBRANCHEZ LE CORDON DE LA PRISE DE
COURANT C.A. AVANT DE RETIRER LE
COUVERCLE ARRIÈRE.
Une fois le couvercle arrière déposé suivez la
procédure ««ATTENTION LORS DU
DÉMONTAGE»» décrite dans la manuel de
service avant de brancher le cordon du
téléviseur dans une prise c.a. L'omission de
suivre la procédure causera des dommages
PERMANENTS à certaines fonctions du
téléviseur.
Manufactured under license from
Dolby Laboratories. "Dolby" and
the double-D symbol are
trademarks of Dolby Laboratories.
VIDEO
(DIGITAL)
AUDIO
(DIGITAL)
DIGITAL-IN
OVER
75Ω
(VHF/UHF)
AUDIO
OUT
R
L
OPTICAL OUT
Digital
Audio
AUDIO
R L
VIDEO S-VIDEO
OVER
INPUT-3
INPUT-2
INPUT-1
COMPONENT VIDEO
Y Pb Pr
Note: The terminal
labeled "SERVICE
ONLY", is exclusively
used to update the
software version.
LCT1855 "B" English 9LCT1855 "B" English 9 10/3/05 10:24:01 AM10/3/05 10:24:01 AM
10
Quick Setup TV Models
NOTE: Before you connect your television to another device, please refer to the proper
diagrams for your specific TV and remote. These will help assist you in understanding
how to connect your television to another device, as well as use the remote to set up
your television.
Side panel diagram
MODEL: AV-30W776
OPERATE
MENU
VIDEO
L/MONO
AUDIO
R
INPUT 4
+
+
VOLUME
CHANNEL
S-VIDEO
OVER
Front panel diagram
MENU - CHANNEL + - VOLUME+
OPERATE
VIDEO L MONO AUDIO R
OVER
INPUT 4
POWERON TIMER
S-VIDEO
MODELS: AV-32S776, AV-32S766, AV-27S776
LCT1855 "B" English 10LCT1855 "B" English 10 10/3/05 10:24:01 AM10/3/05 10:24:01 AM
11
MODELS:
AV-32S776
AV-32S766
AV-30W776
AV-27S776
Quick Setup TV Remote Control
RM-C1270G
For information on remote control buttons, see pages 52 - 61 and 65 - 66.
SUB CHANNEL and GUIDE buttons are for digital channels. If your TV is connected to an
ATSC antenna or Digital Cable, you can use these buttons.
POWER
THEATER PRO
VIDEO STATUS
SLEEP
TIMER
FAVORITE
SUB CH
1
7
4
TUNE
3
9
6
RETURN+
/TV
MUTING
MENU
OK
BACK
2
8
0
5
CH +
VOL
VOL
+
REC
OPEN/CLOSE
STILL/PAUSE
STOP PAUSE
PLAY FFREW
TV
CATV VCR
DVD
VCR CHANNEL
PREV NEXT
TV/VCR
VCR/DVD
POWER
ASPECT
CH –
TV
RM-C1270G
ML/MTS SOUND GUIDE
DISPLAY C.C. D/A
INPUT
LCT1855 "B" English 11LCT1855 "B" English 11 10/3/05 10:24:01 AM10/3/05 10:24:01 AM
12
These quick setup pages will provide you, in three easy steps, with the basic information you
need to begin using your new television right away.
If you have questions, or for more detailed information on any of these steps, please consult
other sections of this manual.
Before you can operate your remote control, you first
need to install the batteries (included).
Lift and pull the latch on the back of the remote control
to open. Insert two batteries (included) carefully noting
the “+” and “–” markings, placing the “–” end in the unit
first. Snap the cover back into place.
When you change the batteries, try to complete the
task within three minutes. If you take longer than
three minutes, the remote control codes for your
VCR, DVD, and/or cable box/satellite receiver may
have to be reset. See pages 23 - 26.
Quick Setup Getting Started
Getting Started
Step 1 – The Remote Control
Key Feature Buttons
The four key feature buttons at the center of the remote
can be used for basic operation of the television. The top
and bottom buttons will scan forward and back through the
available channels. To move rapidly through the channels
using JVC’s Hyperscan feature, press and hold CH+ or
CH –. The channels will zip by at a rate of five channels per
second. The right and left buttons will turn the volume up or
down. These buttons are also marked with four arrows and
are used with JVC’s onscreen menu system. To use the
onscreen menus, press the M
ENU button.
Basic Operation
Turn the television on and off by pressing the POWER button at the top right
corner of the remote. If this is the first time you are turning on the TV, the
interactive plug-in menu appears.
Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if
you need to operate a cable box.
Slide the VCR/DVD selector switch to VCR to control a VCR. Slide to
DVD to control a DVD player. Please see pages 23 to 26 for instructions on
programming your remote control to operate a cable box, VCR or DVD player.
MUTING
MENU
OK
BACK
CH +
VOL
VOL
+
VCR/DVD
CH –
POWER
TV
CATV
V
VCR DVD
LCT1855 "B" English 12LCT1855 "B" English 12 10/3/05 10:24:01 AM10/3/05 10:24:01 AM
13
Quick Setup Connections
Please follow the flow chart below to determine which connection setup is right for you. Then,
refer to the appropriate diagrams to connect your television to other devices that you may
have. After you are finished connecting your devices, plug the power cord into the nearest
power outlet and turn on the TV.
Step 2 – Connecting Your Devices
A VCR is not necessary for operation of the television. If you follow these diagrams and the
television does not work properly, contact your local cable operator.
To connect a DVD player, see Diagram #3. A DVD player is optional.
• If you have a satellite television system, please refer to the satellite TV manual.
Diagram #2
Do you use a Cable TV Box?
Do you have a VCR? Do you have a VCR?
Diagram #1 Diagram #3 Diagram #1
Yes
No
Yes No Yes No
LCT1855 "B" English 13LCT1855 "B" English 13 10/3/05 10:24:02 AM10/3/05 10:24:02 AM
14
Quick Setup Connections
Notes:
If your VCR is a mono sound unit, it will have only one audio out jack. Connect it to the
LEFT AUDIO INPUT on the front of the TV.
Use the S-Video connection if possible for superior picture quality.
Your VCR must be turned on to view premium cable channels.
OVER
75Ω
(VHF/UHF)
AUDIO
OUT
R
L
OPTICAL OUT
Digital
Audio
AUDIO
R L
VIDEO S-VIDEO
OVER
INPUT-3
INPUT-2
INPUT-1
COMPONENT VIDEO
Y Pb Pr
TV Rear Panel
OR
OUT IN
VCR
IN
OUT
IN
OUT
R L V
IN
OUT OUT
Cable Box
Two-Way
Splitter
Coaxial Cable
Cable or Antenna
Output
Diagram #2
Note:
If you do not have a cable box, connect the cable wire from the wall outlet into the back of
the TV.
75Ω
(VHF/UHF)
TV Rear Panel
Cable or Antenna
Output
Coaxial Cable
Cable Box
OR
OUT IN
Diagram #1
LCT1855 "B" English 14LCT1855 "B" English 14 10/3/05 10:24:02 AM10/3/05 10:24:02 AM
15
Quick Setup Connections
Notes:
Green, blue and red are the most common colors for DVD cables. Some models may vary
colors. Please consult the user’s manual for your DVD player for more information.
Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete
one set of connections (DVD or audio output) before starting the other to avoid accidentally
switching the cables.
You may also connect the DVD player to Input 1.
IN
OUT
R L V
IN
OUT
Cable or Antenna
Output
IN
OUT OUT
Two-Way Splitter
Coaxial Cable
(Attachment)
DVD Player (OPTIONAL)
VCR
TV Rear Panel
OVER
75Ω
(VHF/UHF)
AUDIO
OUT
R
L
OPTICAL OUT
Digital
Audio
AUDIO
R L
VIDEO S-VIDEO
OVER
INPUT-3
INPUT-2
INPUT-1
COMPONENT VIDEO
Y Pb Pr
OR
Green
Blue
Red
Y
P
B
P
R
OUT
AUDIO OUT
L R
Diagram #3
LCT1855 "B" English 15LCT1855 "B" English 15 10/3/05 10:24:02 AM10/3/05 10:24:02 AM
16
Quick Setup Connections
Connecting to a Camcorder
1) Connect a yellow composite cable from the camcorder VIDEO OUT, into the VIDEO IN on
the side of the TV, OR connect an S-Video cable from the side of the TV to the camcorder.
2) Connect a white cable from the camcorder LEFT AUDIO OUT, into the LEFT AUDIO IN on
the side of the TV.
3) Connect a red cable from the camcorder RIGHT AUDIO OUT, into the RIGHT AUDIO IN on
the side of the TV.
Note:
If your camcorder is a mono sound model it will have only one AUDIO OUT. Connect it to the
L/MONO on the side of the TV. (AV-30W776 ONLY). For all the other models, please use
the input jacks on the front control panel.
You may connect a camcorder, game console or other equipment to your television by using
the input jacks (Input 4) located on the side or front of the television. You can also connect
these using the television’s rear input jacks, using the same instructions.
OPERATE
MENU
VIDEO
L/MONO
AUDIO
R
INPUT 4
+
+
VOLUME
CHANNEL
S-VIDEO
OVER
Camcorder
- OR -
Connecting to an amplifier using your optical output
You can connect an amplifier that has an optical digital input terminal by using an optical digital
cable from the optical output. The signal that is output can be PCM or Dolby Digital.
TV Rear Panel
Amplifier
OPTICAL OUT
Digital Audio
1) Connect the optical cable from the back of the TV to the back of the amplifier.
Notes:
This terminal can only output digital audio.
In order to use the optical output connection, select PCM or Dolby Digital on Digital Sound in
the Digital Setup Menu. See page 63.
Refer to your owners manual on using your amplifier.
Illustration of AV-30W776
LCT1855 "B" English 16LCT1855 "B" English 16 10/3/05 10:24:02 AM10/3/05 10:24:02 AM
17
Quick Setup Connections
By connecting a Digital TV Reciever, high definition pictures can be displayed on your TV in
their digital form.
TV Rear Panel
DTV Decoder
HDMI to DVI Cable
After the connections have been made,
tighten the screw to secure the cables.
VIDEO
(DIGITAL)
AUDIO
(DIGITAL)
DIGITAL-IN
LR
AUDIO OUTDIGITAL OUT
OVER
75Ω
(VHF/UHF)
AUDIO
OUT
R
L
OPTICAL OUT
Digital
Audio
AUDIO
R L
VIDEO S-VIDEO
OVER
INPUT-3
INPUT-2
INPUT-1
COMPONENT VIDEO
Y Pb Pr
Connecting to a Digital TV Receiver
1) Connect the HDMI to DVI Cable from the DIGITAL OUT on the back of your DTV decoder, to
the DIGITAL-IN on the back of your television.
2) Connect a red cable from the DTV decoder RIGHT AUDIO OUT, to the RIGHT AUDIO IN into
VIDEO-3 on the back of your television.
3) Connect a white cable from the DTV decoder LEFT AUDIO OUT, to the LEFT AUDIO IN into
VIDEO-3 on the back of your television.
The digital-in terminal is not compatible with the picture signal of a personal computer.
Use a HDMI to DVI cable (commercially available) in order to digitally connect the television
with a DTV decoder.
Notes:
If 480p signals (640x480 or 720x480) are displayed on the screen, the horizontal balance
may be slightly shifted. Access the “DIGITAL-IN” in the initial setup menu to adjust it. (Refer
to page 46.)
When you do the above connection, set DIGITAL-IN AUDIO in the Initial Setup menu to
ANALOG. See "DIGITAL-IN AUDIO", page 46.
LCT1855 "B" English 17LCT1855 "B" English 17 10/3/05 10:24:02 AM10/3/05 10:24:02 AM
18
By connecting a HDMI compatible device, high definition pictures can be displayed on your
TV in their digital form. Some HDMI devices can include DVD players, D-VHS or any HDMI
compatible device.
HDMI (High Definition Multimedia Interface) is the first industry supported, uncompressed, all
digital audio/video interface. HDMI provides and interface between any audio/video source,
such as a set-top box, DVD player, A/V receiver or an audio and/or video monitor, such as a
digital television (DTV).
TV Rear Panel
HDMI Compatible Device
LR
AUDIO OUT
DIGITAL OUT
HDMI Cable
VIDEO
(DIGITAL)
AUDIO
(DIGITAL)
DIGITAL-IN
Quick Setup Connections
Connecting to a HDMI Compatible Device
1) Connect the HDMI Cable from the DIGITAL OUT on the back of your DTV or HDMI device, to
the DIGITAL-IN on the back of your television.
Note:
When you do the above connection, set DIGITAL-IN AUDIO in the Initial Setup menu to
DIGITAL. See "DIGITAL-IN AUDIO", page 46.
If the HDMI output device signal is changed (for example, 480i/60Hz is changed to
480p/60Hz), the screen may turn green and there may be some distortion for a short time until
the signal becomes stable.
LCT1855 "B" English 18LCT1855 "B" English 18 10/3/05 10:24:03 AM10/3/05 10:24:03 AM
19
Quick Setup Connections
By connecting your AV Receiver to your television's V1 Smart Input, you can watch picture
sources from many different devices, without having to change or use the other input
connections on your TV. This allows you to free up the other input connections so you can
connect more devices to your television.
Connecting to an AV Receiver using your television's
V1 Smart Input
TV Rear Panel
AV Receiver
OVER
75Ω
(VHF/UHF)
AUDIO
OUT
R
L
OPTICAL OUT
Digital
Audio
AUDIO
R L
VIDEO S-VIDEO
OVER
INPUT-3
INPUT-2
INPUT-1
COMPONENT VIDEO
Y Pb Pr
MONITOR
OUT
MONITOR OUT
Y
P
B
P
R
1) Connect an S-Video Cable from the AV Receiver's MONITOR OUT, to the S-Video INPUT-1
on the back of your television.
2) Connect a Yellow Component Cable from the AV Receiver's MONITOR OUT, into the
VIDEO INPUT-1 on the back of your television.
3) Connect a Green Component Cable from the AV Receiver's Y MONITOR OUT, into the Y
VIDEO INPUT-1 on the back of your television.
4) Connect a Blue Component Cable from the AV Receiver's Pb MONITOR OUT, into the
Pb VIDEO INPUT-1 on the back of your television.
5) Connect a Red Component Cable from the AV Receiver's Pr MONITOR OUT, into the Pr
VIDEO INPUT-1 on the back of your television.
Notes:
Please refer to your AV Receiver instruction manual for more information on connecting your
speakers and other devices like a DVD player.
• Use your AV Receiver's remote to switch to the different devices you have connected.
• Some AV Receivers may not respond when the V1 Smart Input function is turned on.
If you have video connections for each input device connected to your AV Receiver, you
should not connect them using both S-Video and Composite connection at the same time
when you are using V1 Input as the V1 Smart Input. In this case we recommend using the
S-Video connection.
LCT1855 "B" English 19LCT1855 "B" English 19 10/3/05 10:24:03 AM10/3/05 10:24:03 AM
20
When you turn your television on for the first time the interactive plug-in menu will appear. The
plug-in menu helps you to get your TV ready to use by letting you set your preferences for:
• The language in which you want the onscreen menus to appear.
Setting the TV’s clock to the correct time so your timer functions will work properly. You can
choose “AUTO” or “MANUAL” for setting the clock.
• The auto tuner setup of which channels you wish to receive.
We recommend you complete the interactive plug-in items before you start using your
television.
Notes:
The interactive plug-in menu setting does not appear if your TV has been turned on before.
In this case use the onscreen menus to perform these settings. See pages 39, 50 and 30.
• If you press the Menu button while setting up the interactive plug-in menu, it will skip over it.
Step 3 – The Interactive Plug In Menu
Quick Setup Plug-In Menu
After the “JVC INTERACTIVE PLUG IN MENU” has been displayed, the TV automatically
switches to the LANGUAGE settings. You can choose to view your onscreen menus in three
languages: English, French (Français) or Spanish (Español).
®
To choose a language:
(English, Français or Español)
To NEXT (To set clock)
Language
(To be continued...)
LANGUAGE/LANGUE/IDIOMA
ENGLISH
NEXT
SELECT OPERATE EXIT
MENU
LCT1855 "B" English 20LCT1855 "B" English 20 10/3/05 10:24:03 AM10/3/05 10:24:03 AM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80

JVC AV-32S776, AV-32S766, AV-30W776, AV-27S776 User manual

Category
LCD TVs
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI