Panasonic KXP2180 Important information

Type
Important information
TechInfo Sheet fax: 01344 853394
Data Products email:[email protected]
Panasonic CS U.K. Document No: 001
Model: KX-P2180
1
Product Group: Printers Model: KX-P2180
Date: 25/09/98 Revision No: 1.0 Document No: 002
Subject: Does this printer work under any other emulation
Question: Does this printer work under any other emulation.
Answer: This printer has two emulations, Epson and IBM.
When using Epson emulation either the Panasonic driver or the Epson equivalent driver may
be used. The Epson equivalent driver is the Epson FX-850.
When using IBM emulation the IBM Proprinter III driver must be used.
Emulation may be changed by using the initial set up table which can be entered by holding
down the button whilst powering the printer on. By using the column and row
keys
you will be able to change the printers emulation within the table according to the table
below:
ROW indicator. COLUMN indicator ( led is lit or flashing )
R1 R2 R3 R4 C1 C2 C3 C4 C5
ON ON ON ON Print current Initial set up condition.
ON OFF OFF OFF EPSON IBM
OFF ON OFF OFF Italic G1 G2
The and switches move the position of the indicator to the new
setting, the switch is used to store the new setting. Press the
switch to exit initial set up mode.
FUNCTION
ROW
COLUMN
SET FUNCTION
  • Page 1 1

Panasonic KXP2180 Important information

Type
Important information

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI