Gemini GX Serie Owner's manual

Category
Soundbar speakers
Type
Owner's manual
GX SERIES
Professional ABS Moulded Loudspeakers
Professionelle ABS Geformter Lautsprecher
Cajas Acústicas ABS Profesionales
Haut-Parleur Moulé Par ABS Professionnel
OPERATIONS MANUAL
BEDIENUNGSHANDBUCH
MANUAL DE INSTRUCCIONES
MANUEL D’INSTRUCTIONS
GX-800
GX-801
GX-1000
GX-1001
GX-1200
GX-1201
GX-1500
GX-1501
GX SERIES
CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances
such as radios and televisions, use shielded cables and connectors for connections.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the ap-
pliance.
The lightening flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of
s
ufficient magnitude to constitute a risk of electric shock to persons.
R
EAD INSTRUCTIONS: All the safety and operating instructions should be read before the product is operated.
RETAIN INSTRUCTIONS: The safety and operating instructions should be retained for future reference.
HEED WARNINGS: All warnings on the product and in the operating instructions should be adhered to.
FOLLOW INSTRUCTIONS: All operating and use instructions should be followed.
CLEANING: The product should be cleaned only with a polishing cloth or a soft dry cloth. Never clean with furniture wax, benzine, insecticides or other volatile liquids since they may corrode the cabinet.
ATTACHMENTS: Do not use attachments not recommended by the product manufacturer as they may cause hazards.
WATER AND MOISTURE: Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.
ACCESSORIES: Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only
with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturers instructions, and should use a mount-
ing accessory recommended by the manufacturer.
CART: A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to
overturn. See Figure A.
VENTILATION: Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these
openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product
should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturers instructions have been adhered
to.
POWER SOURCES: This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power sup-
ply to your home, consult your product dealer or local power company.
LOCATION: The appliance should be installed in a stable location.
NON-USE PERIODS: The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.
GROUNDING OR POLARIZATION:
• If this product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other), it will fit into the outlet only one way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
• If this product is equipped with a three-wire grounding type plug, a plug having a third (grounding) pin, it will only fit into a grounding type power outlet. This is a safety feature. If you are unable to in-
sert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding type plug.
POWER-CORD PROTECTION: Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at
plugs, convenience receptacles, and the point where they exit from the product.
OUTDOOR ANTENNA GROUNDING: If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against volt-
age surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
See Figure B.
LIGHTNING: For added protection for this product during a lightening storm, or when it is left unattended and unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightening and power-line surges.
POWER LINES: An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as con-
tact with them might be fatal.
OVERLOADING: Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.
OBJECT AND LIQUID ENTRY: Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill liquid of any kind on the product.
SERVICING: Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing
to qualified service personnel.
DAMAGE REQUIRING SERVICE: Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
• When the power-supply cord or plug is damaged.
• If liquid has been spilled, or objects have fallen into the product.
• If the product has been exposed to rain or water.
• If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls
may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.
• If the product has been dropped or damaged in any way.
• When the product exhibits a distinct change in performance, this indicates a need for service.
REPLACEMENT PARTS: When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original
part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
SAFETY CHECK: Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.
WALL OR CEILING MOUNTING: The product should not be mounted to a wall or ceiling.
HEAT: The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.
MULTI LANGUAGE INSTRUCTIONS
ENGLISH.............................................................................PAGE 2
ESPAÑOL............................................................................PAGE 6
DEUTSCH.........................................................................PAGE 10
FRANÇAIS........................................................................PAGE 14
PLEASE READ BEFORE USING APPLIANCE
IMPORTANT WARNING AND SAFETY INSTRUCTIONS!
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT
OPEN!
Fig. A
Fig. B
2
GX SERIES
3
POWERED SPEAKERS
PASSIVE SPEAKERS
REAR PANELS
SAME FOR ALL SIZES
7
6
10
8
11
5
4
3
5
4
8
9
7
10
1
2
12
GX-801
GX-1001
GX-1201/1501
9
8
7
10
6
6
1
2
5
3
1
3
Tip =
Signal
Sleeve =
Ground/Shield
Tip
Sleeve
Strain relief clamp
Tip =
Hot
Sleeve =
Ground/Shield
Tip
Sleeve
Strain relief clamp
Unbalanced use of
mono 1/4” jack plugs
Balanced use of
stereo 1/4” jack plugs
Ring
Ring =
Cold
Connections
For connections of balanced and
unbalanced plugs, ring and sleeve
have to bridged at the stereo plug
Balanced use with XLR connectors
Input
Output
For unbalanced use, pin 1 and pin 3 have to be bridged
1 = Ground/ Shield
2= Hot
3= Cold
1
2
3
3
1
2
2
6
GX SERIES
INTRODUCTION
Congratulations on your purchase of a Gemini GX Series loudspeaker. Your product is backed by a 1 year limited warranty. With proper care and
maintenance your speaker will provide you with years of reliable service. Please register your product online at WWW.GEMNIDJ.COM or by using
the included form at the end of this manual.
4
CONTROL ELEMENTS
FUSE HOLDER/VOLTAGE SELECTOR and MAIN POWER CONNECTOR. Please make sure that your local
voltage matches the voltage indicated on the unit, before you attempt to connect and operate your GX SERIES
loudspeaker. Blown fuses may only be replaced by fuses of the same type and rating.
Use the POWER switch to put your GX SERIES loudspeaker into operation.
MAIN INPUT. These XLR connectors (GX-801 and 1001) and XLR, 1/4” and RCA connectors (GX-1201 and
1501) are the inputs for the signal source. The GX-801 allows you to choose what input type the XLR will be,
simply by using Switch you can choose weather the XLR input is a LINE level input or a MICROPHONE
input. The GX-1001 has separate XLR inputs for MIC and LINE and are adjustable individually. The GX-1201
and 1501 as well as having individual balanced XLR inputs for both MIC and LINE they also have UNBAL-
ANCED 1/4” input for MIC and UNBALANCED RCA inputs for LINE level input.
AUX INPUT The GX-801 has an UNBALANCED RCA AUX INPUT and the volume is controlled by the master
volume. The GX-1001/1201 and 1501) have both BALANCED (XLR) and UNBALANCED (RCA) and allow
you to connect an auxiliary input source, if both MAIN INPUT and AUX INPUT are connected simultaneously
both inputs will be heard.
LINE OUTPUT is directly connected to the input and or inputs of the GX SERIES loudspeaker and provides a
one-to-one copy of the input signal, for example, to loop the input through to the input of another device
(e.g. a second GX SERIES loudspeaker).
POWER and CLIP LED The POWER LED will illuminate when the system is in operation. The CLIP LED will
illuminate when the system is overloading, running your GX SERIES loudspeaker at CLIP levels is not recom-
mended and will cause the internal amplifier to fail and or the MAIN POWER FUSE to blow.
The VOLUME level governs the overall volume level of you GX SERIES loudspeaker.
The MIC GAIN/LEVEL rotary governs the GAIN (GX-801) and or LEVEL (GX-1001,1201 and 1501) of the
MICROPHONE INPUT.
The LINE LEVEL rotary adjust the volume of the INPUT and AUX INPUT Channels (GX-1001,1201 and 1501).
TONE/EQ (BASS and TREBLE) CONTROLS TONE (GX-801) will adjust the overall treble output of the
GX-801 by turning to the left you will hear less high end frequencies and by turning the rotary to the right you
will hear more high end frequencies.
EQ (BASS and TREBLE) (GX-1001,1201 and 1501) The (TREBLE) rotary will adjust the high end frequencies
and the (BASS) rotary will adjust the low end frequencies of the overall output of the GX SERIES loudspeaker.
MIC/LINE SWITCH (GX-801 only) you can choose weather the XLR input of the GX-801 will be a LINE LEVEL
input or a MICROPHONE input. NOTE: USING THIS INPUT WITH A LINE LEVEL SOURCE WHILE
SWITCHED TO THE MIC POSITION MAY CAUSE THE SPEAKER TO OVERLOAD!.
CAUTIONS:
1. All operating instructions should be read before using this equipment.
2. To reduce the risk of electrical shock , do not open the unit .
there are NO USER OR SERVICABLE PARTS INSIDE please refer
servicing to a qualified Gemini Sound Products service technician.
In the USA: If you experiance
problems with this unit, please call
1(732) 346 0061 for Gemni Customer
Service. Do not attempt to return this
equipment to your dealer
1
2
3
11
4
5
6
7
8
9
10
11
((PPOOWWEERREEDD SSPPEEAAKKEERRSS))
((PPAASSSSIIVVEE SSPPEEAAKKEERRSS))
For the GX-800, 1000, 1200 and 1500 use a SPEAKON™ cable from your amplifiers speaker output to the
SPEAKON™ input jack.
12
GX SERIES
SPEAKER STANDS
CHAIN LINK SETUP
DJ BOOTH
MAIN SPEAKERS
CHAIN LINKED SPEAKERS
Woofer magnet wieght
Woofer voice coil
Woofer impedance
Woofer RMS wattage
Woofer peak wattage
Compression driver magnet wieght
Compression driver diaphram size
Compression driver RMS wattage
Compression driver peak wattage
Crossover specification
Nominal horn dispersion
Sensitivity
Frequency response
Type of amplifier
Total RMS wattage
Total peak wattage
Stand mount hole
SPECIFICATIONS
MOUNTING
5
A
B
C
C
STAND MOUNTING Insert a stand into the STAND MOUNTING SOCKET
LOCKING PIN You can lock the stand in its socket by inserting the LOCKING
PIN after you have mounted the stand securely
STACKING You can also stack the GX SERIES speakers by placing the
RUBBER FEET into the STACKING GROOVES.
SPEAKER RIGGING mounting hardware should be used to hang the speaker
where appropriate. Speaker stands and mounting hardware are available
separately.
D
D
A
B
C
D
TOP VIEW UNDERSIDE
40oz
2” / 50.8mm
8/4 Ohms
70 Watts
150 Watts
13oz
1.35” / 35mm
30 Watts
100 Watts
3.5 Khz,12dB/Oct
30°x 60°
97 dB/1m/1w
70-20 Khz
Mono-Power Amp
100 Watts
250 Watts
35mm
GX-800/801
GX-1000/1001
Woofer magnet wieght
Woofer voice coil
Woofer impedance
Woofer RMS wattage
Woofer peak wattage
Compression driver magnet wieght
Compression driver diaphram size
Compression driver RMS wattage
Compression driver peak wattage
Crossover specification
Nominal horn dispersion
Sensitivity
Frequency response
Type of amplifier
Total RMS wattage
Total peak wattage
Stand mount hole
65oz
2.5” / 65mm
8/4 Ohms
150 Watts
400 Watts
13oz
1.35” / 35mm
100 Watts
200 Watts
2.5 Khz,12dB/Oct
30°x 60°
97 dB/1m/1w
45-20 Khz
Mono-Power Amp
250 Watts
600 Watts
35mm
GX-1200/1201
GX-1500/1501
All GX Speakers Have the Following: Steel / Aluminum-Cast Woofer, Stand
Mounting Socket,Auxiliary Line Outputs,/Full Metal Grill, High Temp Voice
Coil,Rigging Points, Rubber Feet, Stacking Grooves, Easy Carry Handles
Shipping Weight: GX-800/801 (27.5 lbs, 12.5 kgs / 31lbs 14.5 kgs)
GX-1000/1001 (35.2 lbs, 16 kgs / 43 lbs, 19.5 kgs)
GX-1200/1201 (48.4 lbs, 22 kgs / 55 lbs, 25 kgs)
GX-1500/1501 (57.2 lbs, 26 kgs / 64.9 lbs, 29.5 kgs)
DANCEFLOOR
40oz
2” / 50.8mm
8/4 Ohms
120 Watts
250 Watts
13oz
1.35” / 35mm
60 Watts
150 Watts
2.8 Khz,12dB/Oct
30°x 60°
97 dB/1m/1w
60-20 Khz
Mono-Power Amp
180 Watts
400 Watts
35mm
65oz
3” / 72mm
8/4 Ohms
180 Watts
550 Watts
20oz
1.75”/44mm
120 Watts
250 Watts
2.2 Khz,12dB/Oct
30°x 60°
99 dB/1m/1w
45-20 Khz
Mono-Power Amp
300 Watts
800 Watts
35mm
Specifications subject to change without notice for improvement
(GX-1200/1201/1500/1501)
GX SERIES
7
7
6
10
8
11
5
4
3
5
4
8
9
7
10
1
2
12
GX-801
GX-1001
GX-1201/1501
9
8
7
10
6
6
1
2
5
3
1
3
1
2
3
3
1
2
2
6
ALTAVOCES AUTOAMPLIFICADOS
PASSIVE SPEAKERS
PANEL TRASERO
IGUAL TODOS TAMAÑOS
Punta =
Señal
Cuerpo =
Masa/Tierra
Punta
Cuerpo
Pestaña de sujección
Punta =
Vivo
Cuerpo =
Tierra/Masa
Punta
Cuerpo
Pestaña de sujección
No balanceado con
jack mono 1/4” jack
Balanceado usando jack
estéreo 1/4”
Anillo
Anillo =
Retorno
Conexiones
En conexiones no balanceadas en
conectores estéreo, el anillo y el
cuerpo deben puentearse
Balanceado con conector XLR
Entrada
Salida
Para no balanceado, el pin 1 y pin 3 deben puentearse
1 = Masa/ Tierra
2= Vivo
3= Retorno
GX SERIES
SPEAKER STANDS
CHAIN LINK SETUP
SPECIFICATIONS
MOUNTING
9
A
B
C
C
D
D
A
B
C
D
TOP VIEW UNDERSIDE
40oz
2” / 50.8mm
8/4 Ohms
70 Watts
150 Watts
13oz
1.35” / 35mm
30 Watts
100 Watts
3.5 Khz,12dB/Oct
30°x 60°
97 dB/1m/1w
70-20 Khz
Mono-Power Amp
100 Watts
250 Watts
35mm
GX-800/801
GX-1000/1001
GX-1200/1201
GX-1500/1501
40oz
2” / 50.8mm
8/4 Ohms
120 Watts
250 Watts
13oz
1.35” / 35mm
60 Watts
150 Watts
2.8 Khz,12dB/Oct
30°x 60°
97 dB/1m/1w
60-20 Khz
Mono-Power Amp
180 Watts
400 Watts
35mm
CABINA DJ
ALTAVOCES PRINCIPALES
ALTAVOCES LINKEADOS
Woofer peso del iman
Woofer bobina
Woofer impedancia
Woofer potencia RMS
Woofer potencia de pico
Compresión driver peso del iman
Compresión driver diafragma
Compresión driver potencia RMS
Compresión driver potencia de pico
Crossover especificaciones
Dispersión nominal de la bocina
Sensibilidad
Respuesta en frecuencia
Tipo de amplificador
Total potencia RMS
Total potencia de pico
Alojamiento de pie de bafle
PIES DE BAFLE Inserte un soporte en el ALOJAMIENTO DE PIES BAFLE
PIN DE SEGURIDAD Usted puede fijar sus pies de bafle en el alojamiento us-
ando un PIN DE SEGURIDAD
APILAR Usted puede tambien poner sus GX SERIES una sobre otra colo-
cando los PIES DE GOMA en los AGUJEROS DE APILAR.
RIGGING se puede utilizar hardware de montaje para colgar estos altavoces
con el apropiado material de anclaje (no incluido) de venta separada.
Woofer peso del iman
Woofer bobina
Woofer impedancia
Woofer potencia RMS
Woofer potencia de pico
Compresión driver peso del iman
Compresión driver diafragma
Compresión driver potencia RMS
Compresión driver potencia de pico
Crossover especificaciones
Dispersión nominal de la bocina
Sensibilidad
Respuesta en frecuencia
Tipo de amplificador
Total potencia RMS
Total potencia de pico
Alojamiento de pie de bafle
Todos los altavoces GX tienen lo siguiente: Woofer de aluminio y acero, alo-
jamiento de pie de bafle, salidas Aux y linea,/Rejilla entera metálica, Bobina de
alta temperatura, puntos de anclaje, patas de goma, agujeros de apile, asas
Peso de envio: GX-800/801 (27.5 lbs, 12.5 kgs / 31lbs 14.5 kgs)
GX-1000/1001 (35.2 lbs, 16 kgs / 43 lbs, 19.5 kgs)
GX-1200/1201 (48.4 lbs, 22 kgs / 55 lbs, 25 kgs)
GX-1500/1501 (57.2 lbs, 26 kgs / 64.9 lbs, 29.5 kgs)
PISTA DE BAILE
Especificaciones sujetas a cambio sin previo aviso por mejoras
65oz
2.5” / 65mm
8/4 Ohms
150 Watts
400 Watts
13oz
1.35” / 35mm
100 Watts
200 Watts
2.5 Khz,12dB/Oct
30°x 60°
97 dB/1m/1w
45-20 Khz
Mono-Power Amp
250 Watts
600 Watts
35mm
65oz
3” / 72mm
8/4 Ohms
180 Watts
550 Watts
20oz
1.75”/44mm
120 Watts
250 Watts
2.2 Khz,12dB/Oct
30°x 60°
99 dB/1m/1w
45-20 Khz
Mono-Power Amp
300 Watts
800 Watts
35mm
(GX-1200/1201/1500/1501)
GX SERIES
13
A
B
C
C
D
D
A
B
C
D
40oz
2” / 50.8mm
8/4 Ohms
70 Watts
150 Watts
13oz
1.35” / 35mm
30 Watts
100 Watts
3.5 Khz,12dB/Oct
30°x 60°
97 dB/1m/1w
70-20 Khz
Mono-Power Amp
100 Watts
250 Watts
35mm
GX-800/801
GX-1000/1001
GX-1200/1201
GX-1500/1501
40oz
2” / 50.8mm
8/4 Ohms
120 Watts
250 Watts
13oz
1.35” / 35mm
60 Watts
150 Watts
2.8 Khz,12dB/Oct
30°x 60°
97 dB/1m/1w
60-20 Khz
Mono-Power Amp
180 Watts
400 Watts
35mm
LAUTSPRECHER-
STATIVE
REIHENSCHALTUNG
DJ PLATZ
HAUPTLAUTSPRECHER
ZUSATZLAUTSPRECHER IN REIHE
Woofer Magnetgewicht
Woofer Schwingspule
Woofer Impedanz
Woofer RMS Leistung
Woofer Spitzenleistung
Kompressionstreiber Magnetgewicht
Kompressionstreiber Membrangröße
Kompressionstreiber RMS Leistung
Kompressionstreiber Spitzenleistung
Trennfrequenz
Horn Abstrahlwinkel
Empfindlichkeit
Frequenzgang
Verstärkertyp
RMS Leistung
Peak Leistung
Stativadapter
TECHNISCHE DATEN
BEFESTIGUNG
STATIVMONTAGE Schieben Sie ein passendes Stativ in den STATIVADAPTER
SICHERHEITSSTIFT Sie können das Stativ sichern, indem Sie den SICHER-
HEITSSTIFT einschieben, nach dem Sie die Box auf dem Stativ befestigt haben.
STAPELN Sie können die Lautsprecher der GX SERIE stapeln, indem Sie die
GUMMIFÜSSE in die STAPELECKEN der unteren Box stellen.
FLUGPUNKTE Verwenden Sie nur passende Montagehardware, die Sie seperat
erwerben können.
OBERSEITE UNTERSEITE
Woofer Magnetgewicht
Woofer Schwingspule
Woofer Impedanz
Woofer RMS Leistung
Woofer Spitzenleistung
Kompressionstreiber Magnetgewicht
Kompressionstreiber Membrangröße
Kompressionstreiber RMS Leistung
Kompressionstreiber Spitzenleistung
Trennfrequenz
Horn Abstrahlwinkel
Empfindlichkeit
Frequenzgang
Verstärkertyp
RMS Leistung
Peak Leistung
Stativadapter
Alle GX Lautsprecher verfügen über: Stahl/Aluminiumguss Woofer, Hochständer-
adapter,Aux Line Ausgänge, Metalfrontgitter, Hochtemperaturschwingspule, Flug-
punkte, Gummifüße, Stapelecken, komfortable Griffmulden
Gewicht/Versandgewicht: GX-800/801 (12,5 kg / 14,5 kg)
GX-1000/1001 (16 kg / 19,5 kg)
GX-1200/1201 (22 kg / 25 kg)
GX-1500/1501 (26 kg / 29,5 kg)
TANZFLÄCHE
Änderungen ohne vorherige Ankündigung vorbehalten.
65oz
2.5” / 65mm
8/4 Ohms
150 Watts
400 Watts
13oz
1.35” / 35mm
100 Watts
200 Watts
2.5 Khz,12dB/Oct
30°x 60°
97 dB/1m/1w
45-20 Khz
Mono-Power Amp
250 Watts
600 Watts
35mm
65oz
3” / 72mm
8/4 Ohms
180 Watts
550 Watts
20oz
1.75”/ 44mm
120 Watts
250 Watts
2.2 Khz,12dB/Oct
30°x 60°
99 dB/1m/1w
45-20 Khz
Mono-Power Amp
300 Watts
800 Watts
35mm
(GX-1200/1201/1500/1501)
GX SERIES
15
7
6
10
8
11
5
4
3
5
4
8
9
7
10
1
2
12
GX-801
GX-1001
GX-1201/1501
9
8
7
10
6
6
1
2
5
3
1
3
1
2
3
3
1
2
2
6
ENCEINTES AMPLIFIEES
ENCEINTES PASSIVES
FACES ARRIERES
IIDDEENNTTIIQQUUEE PPOOUURR TTOOUUSS LLEESS MMOODDEELLEESS
Pointe =
Point Chaud/Signal
Corps =
Masse/Blindage
Pointe
Corps
Décharge de traction
Pointe=
Point Chaud / Signal
Corps =
Masse/Blindage
Pointe
Corps
Décharge de traction
Jack Assymétrique
6.35mm
Jack Symétrique
6.35mm
Bague
Bague=
Point Froid
Connexions
Pour tout branchement d’une connexion
symétrique avec une connexion as-
symétrique, veuillez relier la bague & le
corps sur tout Jack Stéréo 6.35mm.
Utilisation avec connecteurs XLR symétriques
Entrée
Sortie
Pour une connexion assymétrique, les pins 1 & 3 doivent être reliés.
1 = Masse/Blindage
2= Point Chaud
3= Point Froid
GX SERIES
SPECIFICATIONS
17
A
B
C
C
D
D
A
B
C
D
40oz
2” / 50.8mm
8/4 Ohms
70 Watts
150 Watts
13oz
1.35” / 35mm
30 Watts
100 Watts
3.5 Khz,12dB/Oct
30°x 60°
97 dB/1m/1w
70-20 Khz
Mono-Power Amp
100 Watts
250 Watts
35mm
GX-800/801
GX-1000/1001
GX-1200/1201
GX-1500/1501
40oz
2” / 50.8mm
8/4 Ohms
120 Watts
250 Watts
13oz
1.35” / 35mm
60 Watts
150 Watts
2.8 Khz,12dB/Oct
30°x 60°
97 dB/1m/1w
60-20 Khz
Mono-Power Amp
180 Watts
400 Watts
35mm
UTILISATION AVEC PIED DÊENCEINTE
BRANCHEMENT EN PARALLELE (LINK SET UP)
RETOUR DJ
ENCEINTES PRINCIPALES
ENCEINTES BRANCHEES EN PARALLELE
Poids aimant boomer
Diamètre bobine boomer
Impédance boomer
Puissance RMS boomer
Puissance crête boomer
Poids compression
Diamètre diaphragme compression
Puissance RMS compression
Puissance crête compression
Fréquence de coupure
Dispersion nominale
Sensibilité
Bande passante
Type amplificateur
Puissance RMS
Puissance PGM (Crête)
Diamètre embase pied enceinte
INSTALLATION
INSTALLATION AVEC PIED D’ENCEINTE: Insérez le pied dans l’EMBASE.
VERROUILLAGE DU PIED D’ENCEINTE: Vous pouvez sécuriser l’installation
de l’enceinte sur le pied en serrant la vis prévue à cet effet (LOCKING PIN).
EMPILAGE (STACKING): Vous pouvez empiler les enceintes l’une sur l’autre
en respectant les repères prévus à cet effet sur chaque modèle.
ELINGUAGE (RIGGING): Les enceintes peuvent être suspendues à l’aide de 2
inserts (Non livrés) à visser dans les embases prévues à cet effet (Uniquement
pour les modèles GX-1200/1201/1500/1501).
Pieds & accesoires d’installation sont vendus séparément.
VUE DESSUS
VUE DESSOUS
Poids aimant boomer
Diamètre bobine boomer
Impédance boomer
Puissance RMS boomer
Puissance crête boomer
Poids compression
Diamètre diaphragme compression
Puissance RMS compression
Puissance crête compression
Fréquence de coupure
Dispersion nominale
Sensibilité
Bande passante
Type amplificateur
Puissance RMS
Puissance PGM (Crête)
Diamètre embase pied enceinte
Chaque enceinte GX possède les caractéristiques suivantes: Boomer intégrant un
châssis en aluminium moulé, Embase pour pied d’enceinte, Sortie ligne auxiliaire,
Grille pleine de protection, Bobine haute température, Embase pour inserts d’élin-
guage (GX-1200/1201/1500/1501), Pieds en caoutchouc, Empreintes pour empi-
lage, Poignées de transport.
Poids avec emballage: GX-800/801 (27.5 lbs, 12.5 kgs / 31lbs 14.5 kgs)
GX-1000/1001 (35.2 lbs, 16 kgs / 43 lbs, 19.5 kgs)
GX-1200/1201 (48.4 lbs, 22 kgs / 55 lbs, 25 kgs)
GX-1500/1501 (57.2 lbs, 26 kgs / 64.9 lbs, 29.5 kgs)
DANCEFLOOR
Dans le cadre d’un souci constant d’amélioration de nos produits,
ceux-ci peuvent être modifiés sans aucun préavis.
65oz
2.5” / 65mm
8/4 Ohms
150 Watts
400 Watts
13oz
1.35” / 35mm
100 Watts
200 Watts
2.5 Khz,12dB/Oct
30°x 60°
97 dB/1m/1w
45-20 Khz
Mono-Power Amp
250 Watts
600 Watts
35mm
65oz
3” / 72mm
8/4 Ohms
180 Watts
550 Watts
20oz
1.75”/ 44mm
120 Watts
250 Watts
2.2 Khz,12dB/Oct
30°x 60°
99 dB/1m/1w
45-20 Khz
Mono-Power Amp
300 Watts
800 Watts
35mm
(GX-1200/1201/1500/1501)
E
-mail Address:
___________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
Phone #:
Initial:
S
tate
:
or
F
irst Name:
L
ast Name:
P
rovince:
A
ddress: (Number and Street)
C
ity:
Apt #:
Country:
Postal Code:
Model Number:
(Example: CDT-05)
Serial Number: (Located on back of most units)
Month Day Year
Date of Purchase:
Purchase Price:
.00
$
(EXCLUDING TAX)
Dealer:
Z
ip Code:
Age:
City:
or
Month Day Year
Date of Birth
Save postage and register your product online
at www.geminidj.com
and automatically be
registered for great prize giveaways!
If you do not have internet access, fill out the form below and mail to the appropriate ad-
dress listed at the right side of this page.
Cut along this line & keep the rest of this page for your records.
USA
G
EMINI SOUND PRODUCTS
W
orldwide Headquarters
1
Mayfield Ave
E
dison, NJ 08837 USA
T
el: (732) 346-0061
F
ax: (732) 346-0065
SPAIN
GEMINI SOUND PRODUCTS S.A.
Rosello, 516,
08026 Barcelona, Spain
Tel: 3493-436 37 00
Fax: 3493-347-6961
FRANCE
GCI TECHNOLOGIES S.A.R.L
1
, Allee d’Effiat,
P
arc de l’evénement, 91160
Longjumeau, France
Tél: + 33 1 69 79 97 70
F
ax: + 33 1 69 79 97 80
GERMANY
GCI TECHNOLOGIES
Liebigstr. 16,
Haus B – 3. OG,
85757 Karlsfeld
G
ermany
Tel: 08131 – 39171 – 0
Fax: 08131 – 39171 – 8
UK
GEMINI SOUND PRODUCTS
Unit C4
Hazleton Industrial Estate, P08 9JU
Waterlooville, UK
Tel: 087 087 00880
Fax: 087 087 00990
EN FRANCE
En cas de panne, merci de contacter votre
revendeur. Tout appareil en panne doit y être
retourné, accompagné de sa facture d'achat, de
son emballage d'origine et d'un descriptif de
panne. L'appareil sera expédié au SAV de GCI
Technologies France. Tout produit reçu sans fac-
ture sera réparé hors garantie. L’appareil sera
ensuite ré-expédié au revendeur.
IN SPAIN
En caso de mal funcionamiento de esta
unidad, por favor contacte con el Servi-
cio de Atención al Cliente en el teléfono
93 436 37 00 que le asesorará sobre el
procedimiento correcto para solu-
cionarlo. En caso de ser necesario enviar
la unidad para su reparación, el Servicio
de Atención al Cliente le proveerá de un
número de incidencia, así como de la di-
rección del Servicio de Asistencia Téc-
nica más cercano a su residencia.
IN THE UNITED KINGDOM
In the event that you need service on
your Gemini product under warranty,
simply write a letter describing the prob-
lem, along with your contact informa-
tion. Make sure to enclose a copy of
your receipt for proof of warranty infor-
mation. A return number is not re-
quired. You will be responsible for
shipping charges to Gemini UK, and
Gemini UK will pay to return the unit to
you if it is considered under warranty.
IN GERMANY
Die allgemeinen gesetzlichen
Gewährleistungen bleiben von den
Herstellergarantien unberührt. Der
Garantieanspruch erlischt bei Eingriffen
durch den Käufer oder durch Dritte
sowie bei unsachgemässer Behandlung.
Gewährleistungsansprüche sind auss-
chließlich gegenüber
Ihrem Fachhändler geltend zu machen.
WARRANT Y AND REPAIR:
All Gemini products are designed and manufactured to the highest
standards in the industry. With proper care and maintenance, your product will pro-
vide years of reliable service.
LIMITED WARRANT Y
A. Gemini warrants its products to be free from defects in materials and workman-
ship for One (1) year from the original purchase date.
Exceptions: Laser assemblies on CD Players, cartridges, and crossfaders are
covered for 90 days.
B. This limited warranty does not cover damage or failure caused by abuse, misuse,
abnormal use, faulty installation, improper maintenance or any repairs other than
those provided by an authorized Gemini Service Center.
C. There are no obligations of liability on the part of Gemini for consequential dam-
ages arising out of or in connection with the use or performance of the product or
other indirect damages with respect to loss of property, revenues, of profit, or costs
of removal, installation, or reinstallation. All implied warranties for Gemini, including
implied warranties for fitness, are limited in duration to One (1) year from the origi-
nal date of purchase, unless otherwise mandated by local statutes.
RETURN/REPAIR
A. In the U.S.A., please call our helpful Customer Service Representatives at
(732)738-9003, and they will be happy to give you a Return Authorization Number
(RA#) and the address of an authorized service center closest to you.
B. After receiving an RA#, include a copy of the original sales receipt, with defec-
tive product and a description of the defect. Send by insured freight to: Gemini
Sound Products Corp, and use the address provided by your customer service repre-
sentative. Your RA# must be written on the outside of the package, or process-
ing will be delayed indefinitely!
C. Service covered under warranty will be paid for by Gemini and returned to you.
For non-warrantied products, Gemini will repair your unit after payment is received.
Repair charges do not include return freight. Freight charges will be added to the re-
pair charges.
D. On warranty service, you pay for shipping to Gemini, we pay for return ship-
ping within the Continental United States. Alaska, Hawaii, Puerto Rico, Canada,
Bahamas, and the Virgin Islands will be charged for freight.
E. Please allow 2-4 weeks for return of your product. Under normal circumstances
your product will spend no more than 10 working days at Gemini. We are not re-
sponsible for shipping times.
18
IN THE USA: IF YOU EXPERIENCE PROBLEMS
WITH THIS UNIT, CALL 1-732-346-0061 FOR GCI TECHNOLOGIES
CUSTOMER SERVICE. DO NOT ATTEMPT
RETURN THIS EQUIPMENT TO YOUR DEALER.
Parts of the design of this product may be protected by worldwide patents.
Information in this manual is subject to change without notice and does not
represent a commitment on the part of the vendor. GCI Technologies Corp.
shall not be liable for any loss or damage whatsoever arising from the use of
information or any error contained in this manual. No part of this manual may
be reproduced, stored in a retrieval system or transmitted, in any form or by
any means, electronic, electrical, mechanical, optical, chemical, including
photocopying and recording, for any purpose without the express written permission
of GCI Technologies Corp. It is recommended that all maintenance
and service on this product is performed by GCI Technologies Corp. or its
authorized agents. GCI Technologies Corp. will not accept liability for loss or
damage caused by maintenance or repair performed by unauthorized personnel.
Worldwide Headquarters • 1 Mayfield Ave, Edison, NJ 08837 • USA
Tel: (732) 346-0061 • Fax: (732) 346-0065
France • GCI technologies France S.AR.R.L • 1, Allée d’Effiat, Parc de l’evénement, 91160 Longjumeau, France
Tél: + 33 1 69 79 97 70 • Fax: + 33 1 69 79 97 80
Germany • GCI Technologies GmbH • Lerchenstrasse 14 , Haus 3 – 1. Stock , 80995 München, Germany
Tel: 49 (0) 89 319 019 80 • Fax: 08131 - 39171-9
UK • GCI Technologies • 44 The Brambles Enterprise Centre, PO7 7TH Waterlooville, UK
Tel: 087 087 00880 • Fax: 087 087 00990
Spain • GCI Technologies S.A. • Rosello, 516, 08026 Barcelona, Spain,
Tel: 349-3435-0814 • Fax: 3493-347-6961
___________________________________________________
© GCI Technologies Corp. 2007 All Rights Reserved.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19

Gemini GX Serie Owner's manual

Category
Soundbar speakers
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI