Tektronix 001-1383-00 Operating instructions

Brand: Tektronix

Model: 001-1383-00

Type: Operating instructions

Probe Arm Adapter

Instructions

001-1383-00

Kit Contents

H Instruction sheet

H Probe Arm Adapter

Tools Required

H Hexagonal wrench (provided with the

PPM203B product) to remove the screw from

the end of the PPM203B arm.

Overview

Use these instructions to attach the Probe Arm

Adapter to the end of the PPM203B Articulating

Arm or the PPM100 Positioner. The Probe Arm

Adapter is designed to be used with the P7380

8 GHz 5X/25X Differential Probe.

CAUTION. To prevent damage to the probe

arm adapter, do not overtighten the captive

thumbscrews on the Probe Arm Adapter.

Procedure

To install the probe arm adapter, follow the steps

in the appropriate illustrations.

*P001138300*

001138300

Secure the adapter top by

tightening the two thumb screws.

Using the Hex wrench, attach the

adapter bottom to the probe arm.

Using the Hex wrench, remove

the screw from the end of the

articulated arm.

Loosen the adapter top by

turning the two thumbscrews

counter clockwise.

Adapter to probe

arm connection

Probe

arm

Probe arm

adapter

orientation

1

2

4

5

3

Place the probe with the

handheld adapter in the loosened

adapter bottom (keyed).

Probe attached to the

probe arm adapter without

the handheld adapter.

PPM203B Articulating Arm

Probe arm

Probe arm

adapter

orientation

Insert the probe adapter shaft

through the probe arm.

PPM100 Probe Arm

Alternate method. Use the

probe holder provide with the

PPM100 Probe Arm.

Probe

holder

1

Follow steps 3, 4 and 5 as shown

for the PPM203B Ariculating Arm.

Tighten the probe arm knob.

3

Preferred method for attachment

(without the probe holder)

2

Copyright © Tektronix, Inc.

Beaverton, OR 97077

Table 1: Replaceable parts list

ASSEMBLY,ADAPT

ER;PROBE TO

PROBE ARM

Order Tektronix part number

013--0339--XX

Contacting Tektronix

Phone 1-800-833-9200*

Address Tektronix, Inc.

Department or name (if known)

14200 SW Karl Braun Drive

P.O. Box 500

Beaverton, OR 97077

USA

Web site www.tektronix.com

Sales

support

1-800-833-9200, select option 1*

Service

support

1-800-833-9200, select option 2*

Technical

support

www.tektronix.com/support

1-800-833-9200, select option 3*

6:00 a.m. -- 5:00 p.m. Pacific

Standard Time

* This phone number is toll free in North

America. After office hours, please leave a

voice mail message.

Outside North America, contact a Tektronix

sales office or distributor; see the Tektronix

web site for a list of offices.

WARRANTY SUMMARY

Tektronix warrants that the products that it

manufactures and sells will be free from defects in

materials and workmanship for a period of three

(3) months from the date of shipment from an

authorized Tektronix distributor . If a product

proves defective within the respective period,

Tektronix will provide repair or replacement as

described in the complete warranty statement.

To arrange for service or obtain a copy of the

complete warranty statement, please contact your

nearest Tektronix sales and service office.

EXCEPT AS PROVIDED IN THIS SUMMARY

OR THE APPLICABLE WARRANTY

STATEMENT, TEKTRONIX MAKES NO

WARRANTY OF ANY KIND, EXPRESS OR

IMPLIED, INCLUDING WITHOUT

LIMITATION THE IMPLIED WARRANTIES

OF MERCHANTABILITY AND FITNESS FOR

A PARTICULAR PURPOSE. IN NO EVENT

SHALL TEKTRONIX BE LIABLE FOR

INDIRECT, SPECIAL OR CONSEQUENTIAL

DAMAGES.

1
2

Tektronix 001-1383-00 Operating instructions

Brand: Tektronix

Model: 001-1383-00

Type: Operating instructions

Related papers