Haier L26A10A Operating Instructions Manual

01

0090508891

LCD COLOR TELEVISION

OPERATING

INSTRUCTIONS

◆Wide view-angle display, high contrast

◆PIP function

◆AAA function

◆HDMI input

L26A10A

L32A10A

L37A10A

L40A10A

L A10A

L3 A10A

L A10A

26

L32A10A

7

40

1

CONTENTS

Warning and caution.....................................................................................................2

Buttons and interface position......................................................................................5

Front control panel................................................................................................... 5

Back interface...........................................................................................................5

Wall mount switching support assembly instructions................................................. 6

Base disassembly/assembly method........................................................................... 6

Preparation for remote control.....................................................................................7

Remote control panel...................................................................................................8

Basic operation.............................................................................................................9

Power on/off TV........................................................................................................ 9

TV program selection and volume adjustment..........................................................9

Recall.........................................................................................................................9

Mute function............................................................................................................ 9

OSD language selection............................................................................................9

Screen display.............................................................................................................10

TV program setting.....................................................................................................11

Auto search............................................................................................................. 11

Manual search.........................................................................................................11

Fine tune.................................................................................................................12

Skip.........................................................................................................................12

Exchange................................................................................................................. 13

Image control............................................................................................................. 13

Set your favourite picture mode.............................................................................13

Noise reduce............................................................................................................13

Picture mode /sound mode selection.......................................................................14

Sound control............................................................................................................. 14

Sound effect control................................................................................................ 14

System setting function.............................................................................................. 15

OSD background setting......................................................................................... 15

Signal source setting............................................................................................... 15

Screen display picture zoom setting........................................................................15

Other setting function.................................................................................................15

Sleep timer setting...................................................................................................15

PIP setting................................................................................................................16

Sound source setting................................................................................................16

Color temperature....................................................................................................17

Digital filter setting................................................................................................. 17

AAA setting.............................................................................................................17

HDMI.......................................................................................................................18

External audio and video equipment connection....................................................... 19

Using your TV as a computer display........................................................................ 20

Specifications............................................................................................................. 21

Trouble shooting guide...............................................................................................22

2

WARNING AND CAUTION

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.FOR

ANY PROBLEM, REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

THERE IS A LIGHTNING ARROW SYMBOL IN THE TRIANGLE:

THIS SYMBOL INDICATES HIGH VOLTAGE IS PRESENT INSIDE.

IT IS DANGEROUS TO MAKE ANY KIND OF CONTACT WITH ANY

INSIDE PART OF THIS PRODUCT.

THERE IS A EXCALMATION MARK IN THE TRIANGLE: THIS

SYMBOL ALERTS YOU THAT IMPORTANT LITERATURE

CONCERNING. OPERATION AND MAINTENANCE HAS BEEN

INCLUDED WITH THIS PRODUCT.

CAUTION

DO NOT OPENDO NOT OPEN

RISK OF ELECTRIC SHOCK RISK OF ELECTRIC SHOCK

!!

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK AND FIRE,

DO NOT PUT THE TV SET NEAR SOURCES OF HUMIDITY.

DO NOT USE ANY ABRASIVE CLEANSERS WHICH MAY

SCRATCH OR DAMAGE THE LCD SCREEN. AVOID CONTACT

WITH OBJECTS THAT MAY SCRATCH THE LCD SCREEN.

NOTE: SERVICING THE UNIT YOURSELF IS UNAUTHORIZED

AND COULD LEAD TO INJURY OR PRODUCT DAMAGE.

6

WALL MOUNT SWITCHING SUPPORT ASSEMBLY INSTRUCTIONS

(1) In order not to scratch the

TV set, it is recommended

putting the TV set with face

down on the soft and clean

blanket.

(2)Disassemble the six screws

from base and remove the

base. (This item will be

cancelled if the product is

without base.)

(3)Mount the airproof board.

(4)Take out the switching

support from the accessory

bag, and use four M5×16

screws (included in the

Base

Switching support

Airproof board

BUTTONS AND INTERFACE POSITION

5

Front control panel

Back interface

1. Power input socket

2. Antenna input

3. AV2 input

4. AV1 input

5. S-VIDEO input

6. YPbPr or S-VIDEO audio input

7. AV output

8. YPbPr input

9. VGA audio input interface

10. VGA input

11. HDMI input

1

2

457

9

10

8

6

3

HDMI

11

(Y/Pb/Pr)- L-IN R-IN

V-OUT L-OUT R-OUT

AV2 L R

AV1 L R

Power button

Program down/up button

Volume down/up button

TV/AV switch button

Menu button

CH -

TV /AV

ME NU

CH +

VO L-

VO L+

Power indicator

Remote sensor

Power indicator

Remote sensor

Power button

Program down/up button

Volume down/up button

TV/AV switch button

Menu button

CH -

TV /AV

ME NU

CH +

VO L-

VO L+

L26A10A/L32A10A/L37A10A

L40A10A

accessory bag) to fix the switching support on the back of complete set.

(5)The remaining four M5×16 screws in the accessory bag are used to mount the wall

mount parts.(The wall mount parts are in the wall mount box.)

(6)After completing the above operations, the complete set can be mounted on the wall

mount bracket.(Wall mount bracket operations refer to the assembly instructions of it.)

Note: 1. The arrow indicates the position of screw.

2. This operation is only used before mounting the bracket.

3. Wall mount bracket is additional purchase.

4. L37A10A is without switching support, you can mount directly after

disassembling the base.

(1)As figure, removing the four M4×20 screws, the base

will be disassembled.

(2)As figure, mounting the four M4×20 screws, the base

will be assembled.

Note:

The arrow indicates the position of screw.

The position to strike the screw.

BASE DISASSEMBLY/ASSEMBLY METHOD

L26A10A/L32A10A/L37A10A

L40A10A

8

REMOTE CONTROL PANEL

1

2

3

4

7

8

9

11

12

13

14

15

16

17

18

20

21

23

22

24

10

25

19

5

6

11

Power button

Mute button

TV/AV switch button

Display button

Dynamic AAA HDTV on/off button

PIP function on/off button

PIP main/sub picture switch button

PIP sound selection button

One digit selection button

Program recall button

Child lock button

Picture mode selection button

Sound mode selection button

Program up/down button, direction

selection button

Volume up/down button, direction

selection button

Menu call/selection button

Color system selection button

Sound system selection button

Program scan button

Picture still button

This function is not available

Picture size selection button

Sleep timer button

This function is not available

NICAM button

This function is not available

Buttons and Descriptions

26

27

5

8

9

10

1 2 3

4

5

6

7

8 9

0

←

↑

↓

→

=

←

HY F -3 5 R

1

3

7

2

6

4

PIP

AAA

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

MUTE

TV/AV

SOUND

POWER

MAIN/SUB

DISPLAY

CHILD LOCK

P.STD

RECALL

S.STD

CH+

CH-

VOL-

VOL+

MENU

C.SYS

S.SYS

STILL SCAN

BACKZOOM

SLEEP

SIZE

27

26

I-II

7

PREPARATION FOR REMOTE CONTROL

3

2

1

++

Remote control installation

1. According to the figure display below, place the remote control with face down,

then open the cover of battery apartment.

2. As in the figure display below, install two AA batteries. (The + and - symbol of

battery must match with the marks on the remote).

3.Close the cover of battery apartment.

Cautions for using remote control

Confirm there is no object between the

remote control and the remote sensor

of TV set.

Sunshine or other strong light will

interfere the signal sent by the remote

control. In this situation turn the TV

set to avoid the direct light source.

Do not put the remote control in direct

heat or a damp place, or potential

damage to the remote may occur.

Please use two AA 1.5V batteries.

Do not mix battery types.

Install the batteries as the correct

polarities.

Do not use the rechargeable batteries.

9

BASIC OPERATION

10

1. If the TV set is in standby status, pressing power

switch on the remote control or TV set can

cancel the standby status, then enter the power on

status.

2. Pressing power switch on the remote control or

the TV set again, the TV set will enter standby

status.

Standby set: connecting the power supply wire,

the TV set will be in standby status.

TV PROGRAM SELECTION AND VOLUME

ADJUSTMENT

You can use CH+/- button or direct-digit choosing

button to select the TV channel number.

Press VOL+/- button to adjust the volume.

RECALL

Pressing RECALL button can switch the channel to the

last channel you watched.

MUTE FUNCTION

1. Press MUTE button to shut off the TV sound, the

screen displays mute mark.

2. Press MUTE button again or VOL+ button to turn

on the TV sound.

OSD LANGUAGE SELECTION

Select the LANGUAGE item in the menu

1. Press MENU button to select OSD setting menu.

2. Press CH+/- button to select LANGUAGE item.

3. Press VOL+/- button to select the language you need.

OSD

MOVE SELECT MENU EXIT

MUTE

TV/AV

SOUND

POWER

MAIN/SUB

PIP

AAA

DISPLAY

POWER ON/OFF TV

LANGUAGE ENGLISH

H-POSITION

V-POSITION

DURATION

TRANSPARENCY

SCREEN DISPLAY

For your convenient operation and in order to know the TV set, we offer the below

menus.

Picture setting menu

Sound setting menu

Menu setting menu

Function setting menu

Source setting menu

PICTURE MODE PERSONAL

CONTRAST

BRIGHTNESS

SATURATION

TINT

SHARPNESS

NOISE REDUCE

SIZE MODE

STRONG

FULL

PICTURE

MOVE SELECT MENU EXIT

PICTURE SOURCE TV

PIP MODE OFF

SUB PICTURE VGA

COLOR SYSTEM AUTO

SOUND SYSTEM

AUTO SEARCH

MANUAL SEARCH

BG

SOURCE

MOVE SELECT MENU EXIT

SOUND

SOUND SOURCE MAIN

SOUND MODE NEWS

BALANCE

EQUALIZER

LANGUAGE ENGLISH

H-POSITION

V-POSITION

DURATION

TRANSPARENCY

OSD

MOVE SELECT MENU EXIT

CLOCK 00:12

TIME ON --:--

TIME OFF --:--

SLEEP TIMER OFF

COLOR TEMP USER

D FILTER

AAA ON

MOVE SELECT MENU EXIT

FUNCTION

Operation instructions

The real display may be different from the above menus, if you need adjust, please do as

follows:

1.Press MENU button to open the menu, use CH+/- button to select every menu

separately, use VOL+/- button to enter.

2.Press CH+/- button to select the item needs adjust.

3.Press VOL+/- button to adjust the selected item, or enter the next menu.

4.Press MENU button to return the last menu or exit the screen menu display.

Note: “press MENU button to select the menu ”operation in the user’s manual, please

refer to this operation instructions.

11

PICTURE SOURCE TV

PIP MODE OFF

SUB PICTURE VGA

COLOR SYSTEM AUTO

SOUND SYSTEM

AUTO SEARCH

MANUAL SEARCH

BG

SOURCE

MOVE SELECT MENU EXIT

AUTO SEARCH

12

Using AUTO SEARCH can search all receiving

programs. We recommend using auto search to

search the program when you use this TV set for

the first time, before auto search, please confirm

the sound system is BG.

1.Press MENU button to select SOURCE menu.

2.Press CH+/- button to select AUTO SEARCH.

3.Press VOL+/- button to start searching, press

MENU button to finish auto search.

Note: The order of the auto search is due to the

frequency of the program, generally speaking,

it is used only at the first time you search the

program, and once the order of the program has

been confirmed, you don’t have to use this

function, otherwise the order of the program

will be changed.

MANUAL SEARCH

Manual search can search and order the program freely.

1. Press MENU button to select the SOURCE menu.

2. Press CH+/- button to select MANUAL SEARCH,

press VOL+/- button to enter the next menu.

3. Press CH+/- button to select SEARCH NEXT.

4. Press VOL+/- button to start searching, pressing

VOL+ button is used to search the higher frequency

channel, pressing VOL- button is used to search the

lower frequency channel, when you have searched

a program, the searching will stop automatically.

You can press VOL+/- button to go on searching or

press MENU button to exit.

Note: During searching, it may appear black screen

because of change of signal, it is normal, it will

recover after finishing searching.

CURRENT CHANNEL 10

SKIP OFF

TARGET CHANNEL 10

EXCHANGE

AFC OFF

FINE TUNE

SEARCH NEXT 471.2MHZ

SOURCE

MOVE SELECT MENU EXIT

TV PROGRAM SETTING

CURRENT CHANNEL 10

SKIP OFF

TARGET CHANNEL 10

EXCHANGE

AFC OFF

FINE TUNE

SEARCH NEXT 471.2MHZ

SOURCE

MOVE SELECT MENU EXIT

CURRENT CHANNEL 10

SKIP OFF

TARGET CHANNEL 10

EXCHANGE

AFC OFF

FINE TUNE

SEARCH NEXT 471.2MHZ

SOURCE

MOVE SELECT MENU EXIT

CURRENT CHANNEL 10

SKIP OFF

TARGET CHANNEL 10

EXCHANGE

AFC OFF

FINE TUNE

SEARCH NEXT 471.2MHZ

SOURCE

MOVE SELECT MENU EXIT

When you can’t get a satisfactory picture effect,

you can fine tune to obtain.

1. Press MENU button to select SOURCE menu.

2. Press CH+/- button to select MANUAL

SEARCH, press VOL+/- button to enter the next

menu.

3. Press CH+/- button to select FINE TUNE.

4. Press VOL+/- button to start fine tune until you

obtain the best picture and sound, then loose

the button, press MENU button to exit.

SKIP

1. Select the program number you need skip.

2. Press MENU button to select SOURCE menu.

3. Press CH+/- button to select the MANUAL

SEARCH, press VOL+/- button to enter the

next menu.

4. Press CH+/- button to select SKIP, press

VOL+/- button to select ON.

5. Press MENU button to shut off the menu.

When you use CH+/- button to select channel,

this channel number will be skipped. But you

can still use one direct-digit choosing button to

select the skipped channel number.

Note: How to recover the skipped channel number

1. Press direct-digit choosing button to select the

channel number that needs recover.

2. Press MENU button to enter SOURCE menu.

3. Press CH+/- button to select SKIP, press VOL+/-

button to select OFF.

FINE TUNE

13

14

CURRENT CHANNEL 15

SKIP OFF

TARGET CHANNEL 28

EXCHANGE

AFC OFF

FINE TUNE

SEARCH NEXT 471.2MHZ

SOURCE

MOVE SELECT MENU EXIT

1. Press MENU button to select SOURCE menu.

2. Press CH+/- button to select MANUAL

SEARCH, press VOL+/- button to enter the next

menu.

3. Press CH+/- button to select TARGET CHANNEL,

press VOL+/- button to select the channel you need

exchange.

4. Press CH+/- button to select EXCHANGE, press

VOL+/- button to exchange, as figure, exchange

the current channel number 15 to channel number

28.

5. Press MENU button to save and exit.

Note: Please shut off the connected but not used signal

source in order not to affect normal watching.

SET YOUR FAVOURITE PICTURE MODE

PICTURE MODE PERSONAL

CONTRAST

BRIGHTNESS

SATURATION

TINT

SHARPNESS

NOISE REDUCE

SIZE MODE

STRONG

FULL

PICTURE

MOVE SELECT MENU EXIT

1. Press MENU button to select PICTURE menu.

2. Press CH+/- button to select the item that needs

adjust.

3. Press VOL+/- button to adjust the selected item,

the detailed adjustment is as following table.

The table of picture item adjustment effect

*

Items

VOL- VOL+

Contrast

Brightness

Saturation

Tint

Sharpness

Weak

Strong

Dark

Bright

Light

Thick

Green

Red

Soft Sharp

Note: TINT is only valid in N system.

NOISE REDUCE

Noise reduce can decrease the noise of picture

1. Press MENU button to select the PICTURE menu.

2. Press CH+/- button to select the NOISE REDUCE.

3. Press VOL+/- button to select OFF, WEAK or

STRONG as your require.

EXCHANGE

TV PROGRAM SETTING

IMAGE CONTROL

SET YOUR FAVOURITE PICTURE MODE

MOVE SELECT MENU EXIT

SOUND

SOUND SOURCE MAIN

SOUND MODE NEWS

BALANCE

EQUALIZER

PICTURE MODE/SOUND MODE SELECTION

0

移动选择菜单退出

0

50

75 100 300 1K 3K 5K 10K 15K

MOVE

SELECT MENU EXIT

Press P.STD button on the remote control

continually, the following four picture modes

can be selected in turn.

NATURAL: common mode.

SOFT: the image effect is soft.

USER: set the image effect you like.

BRIGHT: suitable for sport image.

NATURAL

BRIGHT PERSONAL SOFT

Press S.STD button on the remote control

continually, the following four sound modes

can be selected in turn.

You can also enter picture and sound menu to adjust.

NORMAL

MUSIC PERSONAL

NEWS

You can select your favourite sound modes, and adjust

the BALANCE and EQUALIZER of sound.

1. Press MENU button to select SOUND menu.

2. Press CH+/- button to select the sound item you

need set.

3. Press VOL+/- button to adjust the selected item.

BALANCE: Press VOL+/- button to enter adjustment,

use VOL+/- button to adjust the balance of left and

right sound.

EQUALIZER: Press VOL+/- button to enter EQUALIZER

set menu, use VOL+/- button to select every different

frequency, use CH+/- button to adjust.

Note: Sound source only can be adjusted in PIP mode.

CHILD LOCK

P.STD

CHILD LOCK

P.STD

RECALL

S.STD

RECALL

S.STD

IMAGE CONTROL

SOUND CONTROL

SOUND EFFECT CONTROL

SOUND

PICTURE MODE PERSONAL

CONTRAST

BRIGHTNESS

SATURATION

TINT

SHARPNESS

NOISE REDUCE

SIZE MODE

STRONG

FULL

PICTURE

MOVE SELECT MENU EXIT

15

SYSTEM SETTING FUNCTION

16

PICTURE SOURCE TV

PIP MODE OFF

SUB PICTURE VGA

COLOR SYSTEM AUTO

SOUND SYSTEM

AUTO SEARCH

MANUAL SEARCH

BG

SOURCE

MOVE SELECT MENU EXIT

CLOCK 00:12

TIME ON --:--

TIME OFF --:--

SLEEP TIMER OFF

COLOR TEMP USER

D FILTER

AAA ON

MOVE SELECT MENU EXIT

FUNCTION

There is different signal source mode in this TV set,

you can select according to your require: TV,

AV1, AV2, S-VIDEO, YPBPR, VGA, HDMI.

1. Press MENU button to select SOURCE menu.

2. Press CH+/- button to select PICTURE SOURCE.

3. Press VOL+/- button to select the signal source

mode you need.

4. You can press TV/AV button on the remote

control to select directly.

SCREEN DISPLAY PICTURE ZOOM SETTING

There is different screen display picture zoom,

you can select according to your require: FULL,

ZOOM1, ZOOM2, NORMAL.

1.Press MENU button to select PICTURE menu.

2.Press CH+/- button to select SIZE MODE.

3.Press VOL+/- button to select the zoom you need.

4.You can press ZOOM button on the remote

control to switch.

OTHER SETTING FUNCTION

After you set the sleep timer, the TV set will count

from the setting time, when the count time is coming,

the TV set will turn off automatically.

Press SLEEP button to enter off time set, you can

select the certain time: OFF, 15Min, 30Min, 60Min...

240Min, after setting, the TV set will start counting.

Note: if you want to see the off time you set, press

SLEEP button. If you want to cancel the sleep time

set, follow the above procedures, set the time OFF.

SIGNAL SOURCE SETTING

SLEEP TIMER SETTING

PIP SETTING

This TV set support PIP function, it can display

picture of two sources at the same time.

1.Press MENU button to select SOURCE menu.

2.Select PIP mode, use VOL+/- button to select

P1S1, P1S2, P2S1, P2S2, P3S1, P3S2, P4S1or

P4S2 mode, open PIP function.

3.Select PICTURE SOURCE, use VOL+/-

button to change the input source of main picture,

such as TV, AV1, AV2 and so on.

4.Select SUB PICTURE source, use VOL+/- button to

change the input source of sub picture, such as

VGA, YPBPR, HDMI and so on.

Note:

1. After switching the main picture source, it will

shut off the PIP function, if need, you can open

this function again.

2. The following two suit

can use PIP function,

the same suit source

can not use PIP

function, source1

and source2 can switch.

3.You can press PIP button on the remote control

to turn on or turn off the PIP function.

4.You can press MAIN/SUB button on the remote

control to switch the main picture and sub picture.

PICTURE SOURCE TV

PIP MODE OFF

SUB PICTURE VGA

COLOR SYSTEM AUTO

SOUND SYSTEM

AUTO SEARCH

MANUAL SEARCH

BG

SOURCE

MOVE SELECT MENU EXIT

SOURCE1

SOURCE2

TV, AV1, AV2, S-VIDEO

VGA, YPBPR, HDMI

SOUND SOURCE SETTING

After the PIP function is open, this item is activated,

you can select the main picture sound or sub picture

sound of current broadcasting sound.

1.Press MENU button to select SOUND menu.

2.Press CH+/- button to select SOUND SOURCE.

3.Press VOL+/- button to change the current sound to

main picture sound or sub picture sound.

Note:

1.You can also press SOUND button on the remote

control to switch the main picture sound or sub

picture sound.

2.After switching the sound to sub picture sound, you

can switch the source in sub picture.

OTHER SETTING FUNCTION

MOVE SELECT MENU EXIT

SOUND

SOUND SOURCE MAIN

SOUND MODE NEWS

BALANCE

EQUALIZER

TRANSPARENCY

63

LANGUAGE ENGLISH

H-POSITION

V-POSITION

DURATION

TRANSPARENCY

OSD

MOVE SELECT MENU EXIT

MOVE

SELECT MENU EXIT

The higher of the transparency set value is,

the higher of the OSD transparency is, whereas,

the transparency is lower.

1. Press MENU button to select OSD setting menu.

2. Press CH+/- button to select the TRANSPARENCY

item.

3. Press VOL+/- button to set the transparency value.

OSD BACKGROUND SETTING

PICTURE MODE PERSONAL

CONTRAST

BRIGHTNESS

SATURATION

TINT

SHARPNESS

NOISE REDUCE

SIZE MODE

STRONG

FULL

PICTURE

MOVE SELECT MENU EXIT

17

CLOCK 00:12

TIME ON --:--

TIME OFF --:--

SLEEP TIMER OFF

COLOR TEMP USER

D FILTER

AAA ON

MOVE SELECT MENU EXIT

FUNCTION

CLOCK 00:12

TIME ON --:--

TIME OFF --:--

SLEEP TIMER OFF

COLOR TEMP USER

D FILTER

AAA ON

MOVE SELECT MENU EXIT

FUNCTION

CLOCK 00:12

TIME ON --:--

TIME OFF --:--

SLEEP TIMER OFF

COLOR TEMP USER

D FILTER

AAA ON

MOVE SELECT MENU EXIT

FUNCTION

1.Press MENU button to select FUNCTION menu.

2.Press CH+/- button to select COLOR TEMP.

3.Press VOL+/- button to select DEFAULT→ 6500K→

→7300K→8500K→9300K→USER

Note: PERSONAL is the color temperature of picture

you set through D FILTER.

DIGITAL FILTER SETTING

Use D FILTER can adjust the color temperature

exactly.

1.Press MENU button to select FUNCTION menu.

2.Press CH+/- button to select D FILTER.

3.Press VOL+/- button to select the COLOR TEMP,

use CH+/- button to adjust.

AAA SETTING

AAA function can improve the quality of picture and

make the picture best.

1.Press MENU button to select FUNCTION menu.

2.Press CH+/- button to select AAA.

3.Press VOL+/- button to select ON, OFF, DEMO or

SPLIT.

4.Press AAA button on the remote control to start

and select AAA mode.

DEMO: Use one moved sub picture in the picture to

start AAA function.

SPLIT: Separate the picture from left and right, start

AAA function in left picture.

Note: It can not use the DEMO, SPLIT function with

no signal and in PIP mode.

COLOR TEMPERATURE

OTHER SETTING FUNCTION

18

- HDMI . The HDMI logo and High-Definition Multimedia Interface is a trademark

or registered trademark of HDMI Licensing.

-This TV can receive the High-Definition Multimedia Interface (HDMI).

-This TV supports HDCP (High-bandwidth Digital Contents Protection) Protocol for

720x480p, 1280x720p and 1920x1080i resolution.

-When you connect this TV with a source device (DVD player, Set Top Box or PC)

supporting Auto HDMI function, the output resolution of the source device will be

automatically set to 1280x720p.

-If the source device does not support Auto HDMI, you need to set the output

resolution appropriately.

To get the best picture quality, adjust the DVD Player or Set Top Box’s output resolution

to 1280x720p, and the PC graphics card’s output resolution to 1024x768, 60Hz.

-If the source device has an HDMI output, no other audio connection is necessary

because HDMI-to-HDMI connecting includes both video and audio.

How To Connect

1. Connect the source device to HDMI port of this TV with an HDMI cable (not

supplied with this product).

2. No separate audio connection is necessary.

How To Use

-If the source device supports Auto HDMI function, the output resolution of the source

device will be automatically set to 1280x720p.

-If the source device does not support Auto HDMI, you need to set the output resolution

appropriately.

To get the best picture quality, adjust the output resolution of the source device to

1280x720p.

-Select HDMI input source by using TV/AV button.

How To Set

The method to set is similar to TV.

OTHER SETTING FUNCTION

TM

19

EXTERNAL AUDIO AND VIDEO EQUIPMENT CONNECTION

You can connect outside signal source VCR VCD

DVD PC equipment to the TV set.

Antenna Input

1.Connect the VCR radio frequency input to

the back radio frequency input of the LCD.

2. Connect the antenna to VCR antenna input.

3. Press TV/AV button to select TV mode.

4. Press PLAY button in VCR to start watching.

AV input

1.Connect audio video output port in VCD to

AUDIO IN and VIDEO IN port in TV set.

2. Press TV/AV button to select component

VIDEO mode.

3. Press PLAY button in VCD to start watching.

S-VIDEO input

If you use S terminal as signal input source,

the image quality will be better than video(AV).

1.Connect S terminal output in DVD to S terminal

input in TV set.

2.Connect S terminal left/right audio output in DVD to

the relevant port in TV set.

3.Press TV/AV button repeatedly until the display

mode is S-VIDEO.

4.Press PLAY button in DVD to broadcast. At this time

the image programs in DVD will broadcast in TV set.

DTV input

1. Composite terminal (Y/PbCb/PrCr) connect to the

composite output of picture output device (such as

DVD, HDTV TUNER and so on ), the sound is input

from AUDIO IN:

2.Press TV/AV button to select YPBPR mode.

3.Press PLAY button on the external device to start

watching.

HDMI input

1.Connect HDMI signal source output to the HDMI

input in this TV set.

2.Press TV/AV button to select HDMI mode.

3.Press PLAY button on the external device to start

watching.

AN T.

VCR

AU DI O IN

LL

RR

S- VI DEO

IN

VID EO IN

VCD

AU DI O IN

L

R

S- VI DEO

IN

VIDEO IN

DVD

LL

RR

AU DI O IN

Y Cb /P b Cr /P r

HDMI

DVD

20

USING YOUR TV AS A COMPUTER DISPLAY

VGA -A UD I O IN

VGA

VGA input

1. Connect the VGA output port in the computer to the VGA port in the TV set.

2. Connect the audio cable in computer to VGA AUDIO IN port in TV set.

3. Press TV/AV button to select VGA mode.

4. Turning on the computer, the screen image of the computer will display on the

TV set.

At this time, the TV set can be used as a computer display.

Note:

1. If the temperature of the TV set is rather low, it is normal that there may be some

artifacts when the set is first turned on.

2. Nonconforming pixels may occur on the panel, but they have no influence on the

normal function of the display.

3. In the standard operation, It is normal if there is one bright dot or dark dot on the

screen.

VGA

SVGA

XGA

640 x 480

800 x 600

1024 x 768

31.5kHz

37.9kHz

48.4kHz

60Hz

Mode

Resolution

Horizontal

Frequency

Vertical

Frequency

RESOLUTION:

Note: The above parameters are VESA standard.

21

SPECIFICATIONS

L26A10A/ L32A10A/L37A10A/L40A10A

Model

Screen

Type

Viewable angle

Color system

Sound system

Video input

TV/VIDEO

PAL, NTSC (AV)

DTV Y/Pb/Pr

Power

Power consumption

Environment conditions

Accessory

Composite: 480i/p, 576i, 720p,1080i,1080p

See rating plate

CVBS, S-VIDEO, YPb/Pr, YCb/Cr, RGB, HDMI

DK, I, BG

Working temperature:

Working humidity:

Storage temperature:

Storage humidity:

+5℃～+35℃

20%-80%

-15℃～+45℃

5%-90%

User’s manual (×1)

Remote control (×1)

Power cord (×1)

Battery (×2)

The design and specifications are subject to change without notice.

A-si TFT active matrix

176°(H)/176° (V)

See rating plate

Dimension (W×D×H)(cm)

68.1×24.6×52.5(included base)(L26A10A)

81.3×24.6×61.9(included base)(L32A10A)

94.6×31×70.3(included base)(L37A10A)

101.3×31×75.4(included base)(L40A10A)

The part specifications of this TV set provided here are for reference only.

Difference may occur as product technology is updated.

22

Note:1.If the problem can not be fixed after you check above items. DO NOT attempt

to remove the back cover by yourself.

2.A snapping sound from the cabinet of the TV set can be heard occasionally.

This is normal and is caused by temperature changes of the operating environment

and does not affect the operation of the set.

TROUBLE SHOOTING GUIDE

The following problems are not always caused by hardware failure, please use the

follow trouble shooting guide before you call for service:

BREAKDOWN PHENOMENON

PICTURE

SOUND

CHECK FOR

The direction and connection of the

antenna

Direction, station and connection

of the antenna

Interference from electric

appliance. Automobile、Motor,

Vehicle Fluorescence lamp etc.

Volume, Sound mute

The power plug isn't plugged in AC

outlet. The main power isn't turned

on. The setting up of contrast, brig-

htness and volume.

Adjust color control

Adjust channel again

?

Picture with Snow

No Color

No Picture

Normal

Disturb

Double or Triple Image

Noise

Normal

Noise

No Sound

Normal Volume

Normal or Weak Volume

??

Scramble

3.Do not let the TV set stay on a static images, as this can lead to permanent

residual images. If this situation occurs, the TV set may recover normal

automatically after 12 hours if you switch the TV set to dynamic programming.

Í·²½»®» Ú±®»ª»®

Ø¿·»® Ù®±«°

Ø¿·»® ×²¼«-¬®·¿´ Ð¿®µô Ò±òïô Ø¿·»® Î±¿¼

îêêïðïô Ï·²¹¼¿±ô Ý¸·²¿

Haier L26A10A Operating Instructions Manual

This manual is also suitable for

Haier L26A10A Operating Instructions Manual

Related papers

Other documents