Wolf 821198 Installation guide

Wolf
Brand
Wolf
Model
821198
Type
Installation guide

This manual is also suitable for

Contents
GAS RANGE KICKPLATE
1 Kickplate
4 Screw, #8 x
3
/8"
6 Screw, #10 x
1
/2"
1 Instructions
Kickplate Installation
Remove the door valance by extracting the side panel
screws and valance screws, then set valance aside. Refer to
the illustration below.
Position the top of the kickplate behind the lower front
support, then rotate into position.
Insert two #10 x
1
/2" screws (four for 48" and 60" models)
into the top of the kickplate, then reinstall the two #8 x
3
/8"
side panel screws. Refer to the illustration below.
To reinstall the valance, place the valance supports behind
the shoulder screws, then reinstall the valance screws. Refer
to the illustration below.
Gas Range Kickplate Installation
wolfappliance.com 800.222.7820
page 1 of 1
821271 REV-A 11/2012
VALANCE
SIDE PANEL
SCREW
VALANCE SCREW
KICKPLATE
LOWER
FRONT SUPPORT
Valance removal.
Kickplate installation.
VALANCE
SUPPORT
VALANCE SCREW
Valance installation.
  • Page 1 1

Wolf 821198 Installation guide

Wolf
Brand
Wolf
Model
821198
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents