Koopers Nex+ User manual

Category
Car seat
Type
User manual

Koopers Nex+ is a Group II, III child restraint that is approved to UN ECE regulation 44/04.

It can be installed in your vehicle using either a 3-point safety belt or a 3-point safety belt in combination with Smart Fix connectors.

The Nex+ has a number of features that make it a safe and comfortable choice for your child, including:

  • Adjustable headrest to ensure a proper fit as your child grows
  • Diagonal belt guides and locks to keep the harness in place
  • Armrests for added comfort
  • Cup holder for your child's convenience
  • Washable seat covers for easy cleaning

The Nex+ is suitable for children weighing between 15-36kg. It is important to always refer to your vehicle's manual to ensure that it is compatible with the Nex+ before installing it.

Koopers Nex+ is a Group II, III child restraint that is approved to UN ECE regulation 44/04.

It can be installed in your vehicle using either a 3-point safety belt or a 3-point safety belt in combination with Smart Fix connectors.

The Nex+ has a number of features that make it a safe and comfortable choice for your child, including:

  • Adjustable headrest to ensure a proper fit as your child grows
  • Diagonal belt guides and locks to keep the harness in place
  • Armrests for added comfort
  • Cup holder for your child's convenience
  • Washable seat covers for easy cleaning

The Nex+ is suitable for children weighing between 15-36kg. It is important to always refer to your vehicle's manual to ensure that it is compatible with the Nex+ before installing it.

Nex+
Group II, III (15-36kg)
Instrucon Manual
The child restraint is approved to UN ECE regulaon 44/04.
Please read all the instrucon in this manual before installing and using the product
1.Important.......................................................... 03
2.Use in the vehicle........................................... ....04
3.Know your child seat...........................................05
4.Adjusng your child seat.....................................06
4.1 Adjusng the seang posion of the child seat...06
4.2 Adjusng the headrest.....................................06
5. Installaon with 3-point safety belt.....................07
6. Installaon with 3-point safety belt in combin-
aon with Smart fix connectors..............................07
7. Securing your child............................................08
8. Remove and reng of seat covers.....................10
9. Cleaning...........................................................10
10. Warranty........................................................11
1.Headrest
2.Diagonal belt guides and locks
3.Armrests
4.Cup holder
5.Backrest
6.Lap belt guides
7.Cup holder retainer
9.Headrest adjustment handle
10.Seat back
11.Smart fix connectors
12.Smart fix indicators(gree/red)
13.Smart fix release buon
14.Smart fix adjustment buon
15.Smart fix inseron guides
16.Side wings
The child seat is approved for two different methods of installaon.
A. With vehicle’s 3-point safety belt
B. With vehicle’s 3-point safety belt in combinaon with smart fix connectors locking into
vehicle’s IS OFI X lower anchorages
Use with the vehicle’s
3-point seat belt
Important:
1. Always used in forward facing passenger seat. We do not recommend to use the child
seat in the front passenger seat.
2. The safety belt must be approved to EC E R16 or a comparable standard.
3. Never use the child seat in the passenger seat equipped with 2-point belt seat.
08
16
8.Recline handle
Use with 3-point safety belt
in combinaon with Smart Fix
mul seang posions
4.2
4-B
4-C
4-D
4-D
5. Installaon with 3-point safety belt
1. Please make sure that the both smart fix connectors are stowed in its original posion(the
most inside posion). If not, please pull&hold the smart fix adjustment buon, meanme push
back the smart fix arms back into the seat base. Repeat the above, to pull back the arm in the
other side.(5-A)
2. Place the child seat on the vehicle seat, make sure the backrest of child seat is flush with
backrest of the vehicle seat. Tips: if the headrest of the vehicle seat gets in the way, please
remove it or turn it in other way.(5-B)
3. Follow the steps in secon 7 ‘Securing your child ‘ to finish the installaon.
Installation in the vehicle
6. Installaon with 3-point safety belt in combinaon with
Smart fix connectors
(6-A/6-B)
(6-C)
5. Follow the steps in secon 7 ‘Securing your child ‘ to finish the installaon.
Unfastening your child seat
To unfastening your child seat,please pull the Smart fix release buons on both sides
Installation in the vehicle
(6-D)
(6-E)
Important:
7. Securing your child
Securing your child
-Before securing your child in the child seat, please make sure the headrest is
adjusted to the correct posion (see secon 4.2)
-Check your vehicle’s manual to see if your vehicle is equipped with ISOFIX
lower anchorages; choose one method of installaon in the vehicle, either
secon 5 or 6 was followed correctly.
1. Have your child sit down in the child seat, and slide the diagonal belt guide locking piece
to open it. Pull out the safety belt and guide it to in front of your child to the seat buckle.
2. Buckle it up with an audible ‘Chick.(7-B)
3. Guide the lap belt and one end of diagonal belt to the belt guides under the both
4. Insert the other end of the diagonal belt into the belt guide under headrest, that slide
the locking piece to close it.(7-D)
5. Remove all the slackness of safety belts to the retractor.(7-E)
Checklist before you go:
-The diagonal belt must run over in the middle of your child’s shoulder, not in his or her neck.(7-F)
-The lap belt must lie as low as possible on your child’s pelvis on both sides.
-No parts of belt should be twisted.
-Make sure the safety buckle is not rested on the lap belt guide.(7-G)
Belt guide s
OPEN
OPE N
7-A
7-B 7-C
colo se
Belt gu ides
colos e
7-D
7-E7-E
(7-A)
armrests.(7-C)
Securing your child
Installation in the vehicle
6-A 6-B 6-C
6-D 6-E
7-G
7-F
8. Remove and refing of seat covers
1. Unhook the elasc loops on the back of headrest and
backrest to remove covers form the headrest and side wings
2. Unhook the cover loops at the boom of seat base to pull
off the cover from it .
Re-ng the cover
Proceed in reverse order to put on the cover.
7
9
9
10.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Koopers Nex+ User manual

Category
Car seat
Type
User manual

Koopers Nex+ is a Group II, III child restraint that is approved to UN ECE regulation 44/04.

It can be installed in your vehicle using either a 3-point safety belt or a 3-point safety belt in combination with Smart Fix connectors.

The Nex+ has a number of features that make it a safe and comfortable choice for your child, including:

  • Adjustable headrest to ensure a proper fit as your child grows
  • Diagonal belt guides and locks to keep the harness in place
  • Armrests for added comfort
  • Cup holder for your child's convenience
  • Washable seat covers for easy cleaning

The Nex+ is suitable for children weighing between 15-36kg. It is important to always refer to your vehicle's manual to ensure that it is compatible with the Nex+ before installing it.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI