Bauknecht WAK 5266 Program Chart

Brand: Bauknecht

Model: WAK 5266

Category: Washing machines

Type: Program Chart

Bauknecht WAK 5266 is a washing machine equipped with several automatic safety functions that can detect and diagnose faults at an early stage and react appropriately. It also allows modification of washing programs by using special options such as Eco, Prewash, Intensive Rinse, Rinse Hold, Spin Speed, and Start Delay. The Start Delay function enables the user to delay the start of the washing program for up to 12 hours, while the Rinse Hold option allows the user to keep the laundry in the last rinse water without spinning, preventing discoloration and additional creasing.

GB WAK 5266 PROGRAMME CHART

5019 401 05292

For improved garment care spin speed is restricted to 1000 rpm in this programme.

For improved garment care spin speed is restricted to 400 rpm in this programme.

Programme

Care

Labels

Type of w a s h /

Degree of soiling

Max.

load

Detergent and Additives

Selectable Special Options =

❉

Te m p e -

rature

°C

Max.

Spin

speed

rpm

Notes

Softener Main

wash

Pre-

wash

Start

Delay

Start

selectie

Eco

Pre-

wash

Voowas

Intensive

Rinse

Intensief

Spoelen

Rinse

hold

Spoel-

stop

Speed

reduction

Centrif.

Cotton

Bonte was

Normally to heavily soiled bed linen,

table linen and underwear, towels, shirts etc. made of

cotton and linen.

For temperature selection, respect the manufacturer's

recommendations on the care label.

5.0

❉

Ye s

❉❉❉❉ ❉ ❉ ❉

30-40

60-95

1200

“Prewash” can be additionally selected for

heavily soiled laundry at any temperature.

Synthetic

Synthetisch

Normally soiled blouses, shirts and other outer clothing made

of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or

mixtures of these fibres with cotton.

For temperature selection, respect the manufacturer's

recommendations on the care label.

2.5

❉

Ye s

❉❉❉❉ ❉ ❉

❉

30-40-60 1000

“Prewash” can be additionally selected for

heavily soiled laundry.

Daily mixed

Gemengde was

Slightly to normally soiled textiles made of cotton and/or

synthetic fibres.

For temperature selection, respect the manufacturer's

recommendations on the care label.

3.0

❉

Ye s

–

❉

––

❉❉❉

40-60 1200

In this programme the spin speed should be

adapted to the fabrics.

Rapid wash

Snelwas

Hardly worn outer and sports clothing made of cotton,

polyester, polyamid and mixed cotton fabrics.

3.0

❉

Ye s

–

❉

––

❉❉

30 1200

–

Delicate

Fijne was

Curtains and delicate dresses, skirts, shirts and blouses.

1.5

❉

Ye s

❉❉

–

❉

30-40 1000

–

Wool

Wol

Only woollens with a felt-free finish, labelled with the

woolmark and identified as machine washable.

1.0

❉

Ye s

–

❉

––

❉

cold

30-40

1000

If you select “Rinse hold” do not leave items to

soak for too long.

Dessous / Handwash

Handwas / Lingerie

Textiles made of linen, silk, wool or viscose marked as

“handwashable”.

This cycle is particularly suitable to treat delicate lingerie

(use of a laundry net strongly recommended).

1.0

❉

Ye s

–

❉

––

❉

30 400

If you select “Rinse hold” do not leave items to

soak for too long. A very gentle spin is used in

this programme.

Easy ironing

Makkelijk strijken

Normally soiled blouses, shirts and other outer clothing

made of polyester (Diolen, Trevira), polyamide (Perlon,

Nylon) or mixtures of these fibres with cotton.

3.0

❉

Ye s

❉❉❉❉ ❉ ❉

❉

40 1000

To lessen creasing, the water quantity is

increased and the clothes are spun very gently

in this programme.

Spin

Centrifugeren

––

5.0

–––

❉

–– – –

❉

–

1200

In this programme spinning is intensive. Same

as the spin cycle in the “Cotton” programme.

Rinse & Spin

Spoelen & centrifugeren

––

5.0

❉

––

❉

––

❉❉❉

20 1200

Same as the spin cycle in the “Cotton”

programme.

Drain

Afpompen

––––––

❉

–– – – – – –

This programme only drains (alternative

method of terminating the programme after

“Rinse hold” without spinning). In addition all

running programmes can be cancelled with this

programme.

{

G H

This washing machine is equipped

with

automatic safety functions

which detect

and diagnose faults at an early stage and react

appropriately, e.g.:

A. “Pump” indicator

B. “Water tap closed” indicator

Check your washing machine’s water

supply.

C. “Door locked” indicator

As long as a washing programme is running,

the lamp lights up to show that the door

cannot be opened.

D. “Start” button

E. Start Delay

F. Programme sequence indicator

G. Spin Speed reduction button

H. Reset button

I. Selectable programmes

40105292GB.fm Page 1 Thursday, November 24, 2005 6:47 PM

Black process 45.0° 100.0 LPI

5019 401 05292

Add the detergent as described in the chapter

“Detergent and Additives” in the instructions for use.

Turn

the

programme selector knob

in any

direction to the desired programme.

The light above the

“Start”

button flashes.

The

programme sequence indicator

and the

indicator with the maximum possible spin speed light up.

• Wash your laundry in the desired programme

(Cotton, Synthetics), adding an appropriate

amount of chlorine bleach to the SOFTENER

chamber (close the detergent dispenser carefully).

• Immediately after end of programme, start the

“Rinse and Spin” programme to eliminate any

residual bleach smell; if you want, you can add

softener.

“Eco” button

• The duration of the wash is extended and the

temperature reduced. This saves you up to 40%

energy and maintains good washing results.

“Prewash” button

•Only for heavily soiled laundry (e.g. sand or

granular dirt). Programme duration is increased

by some 15 min.

“Intensive Rinse” button

• An additional rinse cycle is carried out.

• This option is particularly suitable for areas with

very soft water, washing baby linen and helps

people with detergent allergies.

“Rinse Hold” button

• The laundry remains in the last rinse water without

being spun: discoloration of the laundry and

additional creasing are prevented.

• This option is particularly recommended for the

programme “Synthetic” or “Delicate”.

• This function is particularly useful if you want to

postpone spinning to a later time.

Note:

The programme has reached the “Rinse

Hold” when the corresponding light flashes.

Terminate the “Rinse Hold” option:

• Press the “Rinse Hold” button again; the

programme will terminate automatically with the

appropriate spin cycle for the current programme.

• If you do not wish to spin the clothes, turn the

programme selector knob to “Drain” and press

the

“Start”

button again.

“Spin speed” button

• A maximum spin speed is assigned to each

programme.

• Press the button to set another speed for the

spin cycle.

• If no light goes on, the final spin is cancelled.

The water is only drained out.

CONSUMPTION DATA

Programme Te m p e r a t u r e

(°C)

Wash

(kg)

Water

(l)

Energy

(kWh)

Programme duration

approx.**

(hours : minutes)

Cotton

95 5.0 43

***

1.90 2:00

Cotton

60 5.0 39 0.95 2:05

Cotton

40 5.0 39 0.60 2:05

Synthetic

60 2.5 65

***

0.90 1:40

Synthetic

40 2.5 60 0.50 1:25

Daily mixed

40 3.0 44 0.45 1:00

Rapid wash

30 3.0 35 0.30 0:30

Delicate

40 1.5 55 0.60 0:45

Wool

40 1.0 55 0.60 0:40

Dessous / Handwash

30 1.0 40 0.30 0:35

Easy ironing

40 3.0 65 0.50 1:25

The

consumption values

were measured in normalized conditions in compliance with Standard IEC/EN 60456.

The

programme duration

may also vary from the chart values. The washing machine is able to allow for particular

household conditions and to adapt the programme run time accordingly.

***

To r e d u c e t h e

water temperature

, some cold water is added at the end of the main wash cycle, before the pump

drains the water out.

POUR IN DETERGENT, CLOSE THE

DOOR AND SELECT A PROGRAMME

USING CHLORINE BLEACH

SELECT SPECIAL OPTIONS - The

corresponding lights go on (if not selectable:

rapid flashing for 3 seconds)

With the “Start Delay” function the appliance can be

run cheaply e.g. at night, when the electricity is cheaper.

• Press the “Start Delay” button. Select the

programme start from 3 to 12 hours ahead by

pressing the button again.

•Press the

“Start”

button.

The Start Delay indicator light flashes until the

programme starts.

“Start Delay” correction.

• Before the “Start Delay” has been started:

The preset number of hours can be altered by

continuously pressing the “Start Delay” button.

By pressing the Start Delay button again after the

“12” setting, the time delay can be deleted again or

set again.

After the “Start Delay” has been started:

The preset number of hours can be reduced by

pressing the “Start Delay” button again; please note,

however, that the washing programme starts

IMMEDIATELY, as soon as you activate it again with

the Start Delay switch 3 setting. To increase the

number of hours preselected, first turn the

programme selector switch to the “Off” position.

Then set the programme and the additional options

again and select the desired number of hours.

After you have selected the programme and the

additional option, the indicator light over the

“Start”

button flashes. Turn on the tap and start the

programme by pressing the

“Start”

button. Now the

indicator light above the button goes on.

In addition, all programme phases are indicated by the

associated lights. After the end of a programme phase,

the associated indicator light goes out. Thus the

programme sequence indicator moves from left to

right across the wash, rinse and spin phases. At the end

of the programme, only the “End” indicator is still on..

As long as a washing programme is running, the lamp

lights up to show that the door cannot be opened.

When the lamp goes off, the door can be opened again.

“Start”

has been pressed, but the door is not

latched, the “Door Locked” indicator flashes for 10

seconds. The door must be pushed shut within this

time. After the 10 seconds, the “Door Locked”

indicator goes out and the

“Start”

button flashes.

The door must then be opened and closed again and

the

“Start”

button must be pressed.

“Pump”

Waste water is not pumped out. Check wether the

drain hose is kinked or the filter must be cleaned; in

the latter case refer to the Instructions for Use

(“Removing the Filter”).

“Water tap closed”

The appliance has no or insufficient water supply. Open

the water tap; if the indication still lights up, refer to the

“Troubleshooting Guide” in the Instructions for Use.

• The “End” indicator goes on.

1. Set the programme selector knob to the

“Off” position.

2. Turn off the tap.

3. Open the door and unload the machine.

A newly-selected programme will continue in the

same programme section during which the current

programme was interrupted. Therefore do not add

any more detergent.

1. Press the

“Start”

button to interrupt the

programme. The light flashes.

2. Select the new programme (with temperature),

any additional options and - if you wish - another

spin speed.

3. Press the

“Start”

button again to restart the

programme.

• If you are in the “Prewash” programme step, this

additional option cannot be deselected as

described (to do this see “Cancel (Reset) a

running programme before the end”).

Press the

“Reset”

button for at least 2 seconds.

Any existing water is drained out before the door

can be opened.

START DELAY

PROGRAMME START

“DOOR LOCKED” INDICATOR

“TROUBLE” INDICATORS

PROGRAMME END

RESELECT AFTER PROGRAMME START

CANCEL (RESET) A RUNNING

PROGRAMME BEFORE THE END

40105292GB.fm Page 2 Thursday, November 24, 2005 6:47 PM

Black process 45.0° 100.0 LPI

Bauknecht WAK 5266 Program Chart

Brand: Bauknecht

Model: WAK 5266

Category: Washing machines

Type: Program Chart

Download PDF

report

Bauknecht WAK 5266 Program Chart

Bauknecht WAK 5266 Program Chart

Related papers

Other documents