ComXim MT series User manual

（MT series remote control intelligent turntable manual） 1

MT Series Remote Control Intelligent Turntable

Manual

Shenzhen Comxim Technologies Co., Ltd.

2015-09-19

（MT series remote control intelligent turntable manual） 1

Catalog

MT SERIES REMOTE CONTROL INTELLIGENT TURNTABLE MANUAL .......................................... 1

CATALOG .............................................................................................................................. I

1. PRODUCT DESCRIPTION ....................................................................................... 1

2. FUNCTION SELECTION TABLE .............................................................................. 1

3. MAIN CHARACTERISTICS ...................................................................................... 2

3.1 TURNTABLE FEATURE LIST(ONLY MT370BSL* AND MT600BSL* SUPPORT ALL SPEC.) ........................... 2

4. POST （POWER-ON SELF-TEST） ....................................................................... 3

5. BUZZER AND FEEDBACK....................................................................................... 3

6. INFRARED REMOTE CONTROLLER ...................................................................... 3

REMOTE CONTROL KEY INSTRUCTIONS: ...................................................................................................... 3

7. ANDRIOD APP（MTXXXBLXXX AND MTXXXBSLXXX） ................................... 6

7.1 CONNECTED TO MT SERIES TURNTABLE ............................................................................................... 6

7.2 MT370B* TURNTABLE APP APPLICATION GUIDE ................................................................................ 9

7.2.1 Intermittent mode.............................................................................................................. 9

7.2.2 continuous mode.............................................................................................................. 11

7.2.3 touch mode....................................................................................................................... 12

7.2.4 gesture mode ................................................................................................................... 12

7.3 MENU FUNCTIONS .......................................................................................................................... 13

7.3.1 Refresh help ...................................................................................................................... 13

7.3.2 Update APP....................................................................................................................... 13

8. PC WINDOWS SOFTWARE ................................................................................... 15

8.1 SOFTWARE INTRODUCTION............................................................................................................ 15

8.2 CONNECTING EQUIPMENT ............................................................................................................... 15

8.3 FUNCTION INTRODUCTION ............................................................................................................... 17

8.4 BLUETOOTH ADAPTER DRIVER INSTALLATION AND ADDING EQUIPMENT .................................................. 17

8.4.1 Bluetooth adapter driver installation ............................................................................. 17

8.4.2 Add Bluetooth device ....................................................................................................... 18

8.5 UPDATE ........................................................................................................................................ 22

9. WORKING CONDITION .......................................................................................... 23

9.1 POWER SUPPLY： .......................................................................................................................... 23

（MT series remote control intelligent turntable manual）3

9.2 WORKING TEMPERATURE AND HUMIDITY： ...................................................................................... 23

9.3 STORAGE TEMPERATURE AND HUMIDITY： ........................................................................................ 23

9.4 DIMENSIONS AND WEIGHT：........................................................................................................... 23

10. PRODUCT APPLICATION INTRODUCTION..................................................... 23

10.1 THE TURNTABLE CAN BE APPLIED TO MODEL AND ARTICLE 360 DEGREE DISPLAY.................................... 23

10.2 TURNTABLE WITH SHUTTER FUNCTION FOR 360 DEGREE PHOTOGRAPHY（ONLY FOR MT370BSL*SERIES

AND MT600BSL* SERIES） ......................................................................................................................... 24

10.3 SOFTWARE AND MANUAL DOWNLOAD： ........................................................................................ 25

11. FAQ .................................................................................................................... 25

（MT series remote control intelligent turntable manual） 4

1. Product description

MT series turntable is a company and individual users of the Shenzhen Health Technology Co., Ltd.

launched a remote intelligent turntable, with infrared remote control, PC Windows software, Andriod mobile

phone App. The series turntable is widely used in the electric business and advertising industry, such as 360

degree object display, 360 panoramic shooting, 3D photography, 3D scanning, 3D holographic image, etc..

MT series of table type naming rules are as follows:

MT

370

BS

L100

H

Turntable Series

Turntable

Diameter ( mm )

B：With

Bluetooth

interface

S：With

Shutter

interface

Load ( Kg )

International

Version

Identification

H:

International

Version

2. Function Selection Table

Product

model

Diameter

(mm)

Flexibility

Load

(KG)¹

Speed

Range

(S/Ring)

Adjust

speed

Gear

Brake

Uniform

Speed

Remote

control

Angle

adjustment

Android,

Computer

Angle

adjustment

Control

camera

Automatic

shutter

Net

weight

（KG）

MT370L80x

370 .8

80

15~48

12

Level

Yes

No

5.5KG

MT370L100x

370 .8

100

30~70

12

Level

Yes

No

5.5KG

MT370L80

370.8

80

15~48

12

Level

Yes

No

5.5KG

MT370BL80

370.8

80

15~48

12

Level

Yes

No

5.5KG

MT370BSL80

370.8

80

15~48

12

Level

Yes

5.5KG

MT370L100

370.8

100

30~70

12

Level

Yes

No

5.5KG

MT370BL100

370.8

100

30~70

12

Yes

No

5.5KG

（MT series remote control intelligent turntable manual）3

Level

MT370BSL100

370.8

100

30~70

12

Level

Yes

5.5KG

MT600L250

600.00

250

18~120

34

Level

Yes

28KG

MT600BL350

600.00

350

18~120

34Level

Yes

28KG

MT600BSL300

600.00

350

18~120

34

Level

Yes

28KG

Note：

1. "Yes" indicates support for this feature, "No" indicates that the feature is not supported.

2.The above form is unknown, before buying, welcome to consult us, lest cause misunderstanding.

3.If you need to change the turntable in accordance with their own ideas to go to some of the features, but also please contact us. (extra

charge)

4."1" column indicates the test conditions for flexible load test, such as the standing test, Bucket test Etc.

（On the rigid load, the starting load is less than that of the flexible load, the rotating load is equal to the flexible load, the rigid load such as

the metal, stone, etc.）.The load test is no more than the rotary table diameter.

5.The turntable uses a large range of frequency conversion speed regulation, the part of the low frequency (individual Gear) has a trace of

low frequency noise (very small, very small), is a normal phenomenon, does not affect the use, and does not affect health, please rest

assured that use.

3. Main Characteristics

3.1 TurnTable feature List(only MT370BSL* and MT600BSL* Support all

Spec.)

 Diameter: 37.8cm.(MT370) or 60CM(MT600)

 Height: 8cm(MT370) or 15cm(MT600)

 Mark: the sign in the center (MT370)

 Color: color support (porcelain white, black pearl, sky blue), default white. (MT370)

 Load:MT370BSL100 maximum 100KG / MT600BSL300 maximum 300KG

 Speed: remote control 12 gear , Equipped with 31 key remote control (MT370)

 MT370BSL60 speed range:15 sec/loop ~ 48 sec/loop,3 sec a level.

 MT370BSL100 speed range:30 sec/loop ~70 sec/loop.3.6 sec a level.

 Speed: remote control 12 gear , Equipped with 31 key remote control (MT600)

 MT600BSL300 speed range:18sec/loop ~120 sec/loop. 3 sec a level.

（MT series remote control intelligent turntable manual）5

 Direction of rotation: remote adjustment direction (left and right)

 Intelligence: support for setting the starting position and return to

the starting position, support for any rotation angle and stop.

 Rotation mode: support continuous rotation and Step by step mode

(pause time can be set).

 Computer control: computer control speed and angle and shooting

(Equipped with USB Bluetooth adapter)

 Mobile control: mobile APP control speed and angle and shooting,

etc. (currently supports Android).

 Synchronous shutter: support for the shutter output, and camera

linkage, support the timing shutter.

4. POST （Power-on Self-Test）

Turn on the power switch, the turntable automatically executes the self-test program, the success of the test

marks：" Beep, Beep, Beep," 3 sound or the indicator lights up red.（MT370Lxx series indicator light is always on，

MTXXXBLxxs or MTXXXBSLxxs indicator is flashing, when connected to a computer or mobile phone becomes

always lit）

5. Buzzer and Feedback

The MT series rotary table is used by the buzzer to sing, which is prompted by the turntable status or the

command feedback:

POST after the completion of the tweet.

When using the controller (infrared remote control, Andriod App, PC Windows software) on the

turntable, the turntable buzzer will do the corresponding tweet, prompting the user to receive the

control commands:

1) if the turntable is correctly received the key commands, the status of the buzzer is based on the

key before and after the buzzer sound 1 or 2;

2) if the button is pressed, the buzzer does not tweet, which indicates that the key information is

not properly received, or the model turntable does not support the function.

MTxxxBSL and above models, in each automatic send out the shutter signal before the buzzer short

sound 2.

6. Infrared remote controller

Remote control key instructions:

Note: the turntable received a key signal will be issued a tweet.

Remote control

appearance

Key

Picture

Key Name

Key Function

Alert Sounds

（MT series remote control intelligent turntable manual）3

Remote

lock key

Function: reduce the interference between the

equipment when using multiple turntable.

-

 If the remote control key is currently unlocked,

the remote control key lock（In addition to the key,

the other key is invalid）

2 beep

 If the current state is locked, the remote

control button to unlock.(Restore all key functions)

1 beep

Save Key

Function: Save current settings

 The current configuration parameters

(including rotation angle, pause time, repeat

number, speed, rotation mode, rotation direction)

are stored in the internal storage. Once again, the

turntable rotates in accordance with the save

settings.

1 beep

Rotation

angle

shortcut key

Function : Press the key in this group, rotate

the rotary angle.

 Press 0.5,the turntable is around 0.5

degrees.

 Press 1/32, the turntable is around 360*1/32

(11.25 degrees)

1 beep

Set origin

Function：Press this key, the turntable stops and

Remember the current position is the origin.

2 beep

Back to the

origin

 Function：Automatic return to the origin

of the setting.

 If the turntable is not at the origin,

return to the origin of the setting,

 For example: in the 360 degree camera

scene, through the "set origin " and "back to

the origin", do not need to manually adjust the

shooting objects in the turntable position.

1 beep

 If the turntable is currently doing the

back action, the key is ignored.

2 beep

 If the turntable at the origin, the key is

ignored.

2 beep

（MT series remote control intelligent turntable manual）5

Start /

stop

 If the current state of the turntable is

stopped, the turntable rotation is started.

1 beep

 If the current state of the turntable is

rotated, the turntable is stopped.

2 beep

Speed

improvemen

t

 If the speed of the turntable has not

fastest speed gear, plus 1 level.

1 beep

 If the speed of the turntable is the

fastest, the key is ignored.

2 beep

Speed

reduction

 If the rotation speed of the turntable has

not reached the slowest speed, the speed will

Speed decrease 1 level.

1 beep

 If the speed of the turntable is the

slowest, the key is ignored.

2 beep

Rotate

left

key

 If the current state of the turntable is not

left, then set the turntable to the left, and

start the turntable rotation.

1 beep

 If the current state of the turntable has

been turn to left, start the turntable

rotation.

2 beep

Rotate

Right

key

 If the current state of the turntable is not

right, then set the turntable to the right, and

start the turntable rotation.

1 beep

 If the current state of the turntable has

been turn to right, start the turntable

rotation.

2 beep

Continuous

rotation

key

Function: start the turntable unlimited

continuous rotation.

2 beep

Intermitte

nt

rotation

key

Function:start the turntable intermittent

rotation

Press this key to Start the turntable

intermittent rotation the angle of rotation by

the recent rotation angle shortcut key decision,

can also be determined by the number of recent

photo(Equal circle shortcut key), the angle of

the rotation set, suspended for 4 seconds,

1 beep

（MT series remote control intelligent turntable manual）3

unlimited repeat.

Multi angle

shooting

shortcut

keys

(Equal

circle

shortcut

key)

Function: Press this key to control the turntable to

suspend n times Within a circle. (n = 2, n = 4, n =

8 „„)

For example: press the key in this group (e.g. 8

keys), the turntable rotates every time 1/8

circle, 45 degrees (=360 *1/8), Suspended one

time , Suspended time 4 seconds (MT370BSLxx

series is automatically sent out the shutter

signal to take a photo), repeat 8 times that a

circle automatically back to the starting

position.

1 beep

Focus key

Function: Press this key to send out the focus

signal (MT370BSLxx version support).

1 beep

Photo key

Function: Press this key to send take a photo

signal (MT370BSLxx version support).

1 beep

Focus

+ Photo Key

Function: Press this key to send focus + take a

photo signal (MT370BSLxx version support).

2 beep

Note : Press the "rotation angle shortcut key" to rotate the turntable immediately; Press " Multi angle

shooting shortcut keys ", the buzzer 1 beep, but the turntable does not immediately turn, but suspended for

4 seconds, after the suspension of rotation;

If you press "start / stop button", "turn left", "turn right" may be immediately rotating, it is possible

to pause for 4 seconds and then rotate, How the turntable rotates, it is decided by the last state (such

as the most recent press " Multi angle shooting shortcut keys ", then suspended 4 seconds to send the shutter

signal, otherwise the turntable is not suspended but immediately rotating).

-- Shenzhen ComXim Technologies Co., Ltd. reserve the right to explain the above specifications.--

7. Andriod App（MTxxxBLXXX and MTxxxBSLXXX）

7.1 Connected to MT series turntable

Step 1 ：Turn on the MT series product power switch, the device with the function of the Bluetooth will have

the light flashing, and the representative can

be connected with the control end.

（MT series remote control intelligent turntable manual）5

Figure1 TurnTable Icon

Step 2 ：As shown in Figure1and Figure2，In the Android mobile phone find Turntable Icon. And start

Turntable app, touch "Scan" button in the upper left corner, the app will automatically search MT series Bluetooth

devices.

Figure2 Scan “MT370B*” devices

Step 3 ：As shown in Figure3，When you find a Bluetooth device, you can set up a connection with the

Bluetooth device in the Figure4. Note: the first time when the link will show the XXXX is Non Paired, as

shown in Figure 5. When the connection is required to enter a password, the password is "1234" or

"0000" (without the quotes). As shown in Figure Figure6

（MT series remote control intelligent turntable manual）3

Figure3 Find Paired MT370B* devices

Figure4 Touch And connection devices

Figure 5 Find No Paired MT370B* devices

（MT series remote control intelligent turntable manual）5

Figure 6 Touch connection requires a password “1234”

As shown in Figure Figure7 “Connected:MTxxx-XX:XX:XX:XX:XX:XX”， Has been connected successfully.

Figure 7 Connected to MT370B*

7.2 MT370B* turntable APP Application Guide

7.2.1 Intermittent mode

As shown in Figure Figure8，Set the mode switch to an interval (mode), set the rotation angle of 22.5

degrees, set the time to 5 seconds and repeat 16 times to complete a circle. After setting

up, press left or right to start the turntable intermittent to turn left or turn right. The

turntable rotates 22.5 degrees every time, pause for 5 seconds, and then continue to rotate

（MT series remote control intelligent turntable manual）3

the next 22.5 degrees. Repeat 16 times, 22.5 degrees per rotation at a time(16*22.5° = 360°).

The method is often used to produce 16 frames of GIF animation. As shown in Figure 9, you can

press the start / stop to stop this operation in the process of rotation, such as the turntable

that has been stopped, then press start / stop, and then repeat a circle (16*22.5 = 360).

If your device has automatic shutter function (model :MT370BSL* or MT600BSL* ). Then the default

check "automatic shutter", when the rotation of the turntable is suspended, it automatically sends out the

shutter signal. If need to be suspended during the turntable control camera to take pictures, only need to use

the shutter line connecting the turntable and the camera.

Figure 8 Set 16 stops per circle, pause for 5 seconds.

（MT series remote control intelligent turntable manual）5

Figure 9 Turn left or right turn

As shown in Figure 9, you can also connect the camera to the turntable shutter interface, and use the

phone to control the camera to take photos with the turntable.

7.2.2 continuous mode

As shown in Figure 10, switch to continuous mode, touch the left and right buttons, turn left or turn right.

During the rotation of the turntable, the speed of the rotary table is changed according to the Acceleration

button or deceleration button. Press the Save button and save the current setting value, and the next power

on , use the save value to rotate.

（MT series remote control intelligent turntable manual）3

Figure 10 Continuous rotation mode

7.2.3 touch mode

As shown in Figure 11, switch to the touch mode (if the turntable is rotating in the other mode, the

turntable is on standby). Press the touch progress bar, and drag to the required position. If the turntable is

stopped, the turntable is rotated from the current position to the drag position. As shown in Figure 11,turn 83

degrees from the current position.

Figure 11 Touch mode to drag the scroll bar control turntable

7.2.4 gesture mode

As shown in Figure 12, gesture mode if the turntable is rotating in the other mode after the switch, the

turntable is on standby. In the rotation of the text box input to turn the angle, shake the phone to the left or to

the right. As shown in Figure 12,turn left or right turn 21 degrees from the current position.

（MT series remote control intelligent turntable manual）5

Figure 12 shaking rotating 21 degrees

7.3 menu functions

7.3.1 Refresh help

As shown in Figure 13, the online update help file

Figure 13 online update help file

7.3.2 Update APP

Click New App , you can update the software, after the completion of the update automatically installed,

（MT series remote control intelligent turntable manual）3

please check the phone has enough power, and connected to the Internet.

Figure 14 Update New APP

Figure 15 Update New APP , support more function

（MT series remote control intelligent turntable manual）5

Figure 16 Install New APP , support more function

8. PC Windows software

8.1 Software introduction

Through the PC Windows software, can achieve the turntable control, PC Windows software control

turntable can achieve infrared remote control all functions, and can realize the function of some infrared

remote control can not complete.

System requirements:

Hardware: a computer with a Bluetooth enabled computer, or a USB interface, which can be used with a

Bluetooth adapter.

Operating system: XP/2003 Server/Vista/2008 Server Windows, 7/8/10 Windows operating system.

8.2 Connecting equipment

Note: if the first use of this software, or have not yet been installed to drive and add a Bluetooth device, please first

in accordance with the 8.4 Bluetooth adapter driver installation section is shown to complete the driver installation and

Bluetooth devices (turntable) add, and remember the device corresponding to the virtual serial port number(Comx),

the device can only be added once, the next can be directly connected with the virtual serial port.

Start the PC Windows software TurnTable, select the device virtual serial port number, as shown in the figure

below (this option COM17, if not know the turntable corresponding virtual serial port number, in accordance

（MT series remote control intelligent turntable manual）3

with the method of query virtual serial port number 8.4.1 query):

Click the connect device button to appear as follows (this example uses the turntable model for the

MT370BSL100, the Chinese mainland version):

Notice:After the success of the Bluetooth connection, the turntable beep 1, while the power supply / Bluetooth indicator to stop

flashing light.

Page is loading ...

ComXim MT series User manual

ComXim MT series User manual

Other documents