MICTUNING Q1 RGB Rock Lights Operating instructions
- Type
- Operating instructions
MICTUNING Q1 RGB Rock Lights FAQ
Frequently Asked Questions:
Q1: The APP cannot search for the device?
A1：
Step1: Check the wiring to ensure the control box is powered.
Step2: Open the Bluetooth settings of the mobile phone, power on normally, and the device can be
searched on the mobile phone.
Step3:
For iPhone, please follow the steps below:
1) Please restart the mobile phone and download the "MIC Light" or "Mictuning" app.
2) Open the APP authorization and Bluetooth authorization (phone settings - privacy - Bluetooth -
allowed apps).
3) Ensure the ALL DEVICES section has at least 1 device showing.
4) Tap the "Save Connections", and add your "Rock Light-3Q1" or "Rock Light-3Q1S" (or whatever
version you have).
If it is an Android phone, please follow the steps below:
1) Please restart the mobile phone and download the "MIC Light" or "Mictuning" app.
2) Turn on the location service and APP location authorization.
3) Allow all the permissions the app requests. If you don't, the app will not work.
4) Tap on the settings (slider icon on the upper right).
5) Ensure the ALL DEVICES section has at least 1 device showing.
6) Tap the "Save Connections", and add your "Rock Light-3Q1" or "Rock Light-3Q1S" (or whatever
version you have).
7) Tap the Back button on the upper-left.
8) Try the colors. If it works, that's it. You can configure your lights the way you want.
Q2: No Bluetooth signal can be searched in the phone Bluetooth settings.
A2:
Step1: Check whether the wiring and power supply are properly connected (ensure that no other mobile
phone is connected to the device).
Step2: Turn off the control box, restart it, and search close to the control box. If the device is still not
found, please contact us.
Q3: In the case of APP connected to the device, the light is not controlled nor the
colors.
A3:
Step1: If the rock light can come on, you just need to check the controlled device option on the APP.
Step2: If the controlled device is checked on the APP, the light still does not light up or the color cannot
be changed, please contact us.
Q4: The APP cannot display the color correctly when switching colors.
A4:
Step1: First of all, pls check if you have selected the control device on the app.
Step2: Then pls turn on the test mode in the APP and connect the lights to test whether the red, green
and blue colors work normally.
Step3: If normal, pls kindly help to test the lights by plug every single lights in one time to see which pod
light cannot display the color correctly.
Step4: After that help to swap the light with to different sockets to see whether it can work normally.
Step5: If still can't get the pod light work. please contact us.
Q5: Why are all the lights flashing after installation
A5:
Situation 1:
Turn on the APP self-check function and connect a light to test. If it is normal, test all the lights and
please contact us.
Situation 2: Strobe mode is selected
Adjust the flashing progress bar to the lowest
Q6: The white color of the light is not pure white, but other colors are normal
A6: Update APP （MIC Light or Mictuning）
Q7: Can APP control several sets of devices at the same time
A7: The APP can control 4 sets of devices of the same type simutaneously (such as 4 sets of rock lights),
also it can control the device individually.
Q8: There are 2 or more sets of devices, one of which does not light up.
A8:
1) Check the wiring, restart, turn on the phone bluetooth setting, search for the device. If it no device can
be found. In that case, please contact us.
2) If it can be searched, you just need to check the controlled device option on the APP or reconnect
device.
Q9: How to judge whether the product is powered on correctly?
A9:
Step1: First, after connecting the cable, turn on the switch, the switch indicator lights up.
Step2: Then, turn on the Bluetooth settings of the mobile phone and search for the device signal Rock
Light-3Q1 or Rock Light-3Q1S, which means that the connection is correct and the product is powered
on normally. If not, check whether the connection of wire harness is correct.
For more questions, please don’t hesitate to contact us.
-
1
-
2
