2. STEMCO
  3. 343_Wig-Wag

STEMCO 343_Wig-Wag Installation guide

  • Hello! I've reviewed the STEMCO Wig-Wag Installation Instructions document. I understand it details how to install the low air pressure indicator. The document specifies mounting location, air line connection, and important warnings against adjusting the device. I am ready to assist you with any questions you may have about this device.
  • Where should the Wig-Wag be mounted?
    Where should the air inlet on the Wig-Wag be connected?
    Is it safe to adjust the sensitivity of the device?
STOP
LOW AIR
RESET
Low Air Pressure Indicator
Mount above windshield in operator’s forward field of view. Connect air inlet on the Wig-Wag
to terminal block under dash, or any other air line which is under constant reservoir pressure.
WARNING: DO NOT ADJUST THE SENSITIVITY OF THIS DEVICE. All warranties may be
canceled and/or declared void if returned parts reveal evidence of unauthorized adjustment
or tampering.
STEMCO SAFETY PRODUCTS WIG-WAG INSTALLATION INSTRUCTIONS
Form No. 343 (Rev. 9/99) Hudson 1-9117
P. O. Box 1989 • Longview, Texas 75606-1989
(903) 758-9981 • 1-800-527-8492 • FAX 1-800-874-4297 • www.stemco.com
/