2. PLASTICADE
  3. Rubber Speed Bumps
Rubber Speed Bumps

PLASTICADE Rubber Speed Bumps Operating instructions

  • Hello! I've reviewed the installation instructions for PLASTICADE Speed Bump, Speed Hump, and Parking Stop. The document provides step-by-step guidance for installing these products on both asphalt and concrete surfaces, mentioning the use of adhesive and hardware, also it describes spacing and speed limitations. I'm ready to assist you with any questions you have about the installation process, or any other topic related to the provided document.
  • What spacing is recommended between Speed Bumps?
    Can the product be cut?
    When should adhesive and hardware both be used for installation?
    What is the speed limit for vehicles driving over the device?
    What should be done when using sweepers over the device?
Speed Bumps, Speed Humps & End Caps:
Leave 1”- 3” between Speed Bumps for drainage and expansion.

Use both Adhesive & Hardware for installa�on under the following condi�ons:




- Not designed for speeds over 15 mph.
- Sweepers must raise brushes before driving over.

Posi�on Speed Bump, Speed Hump, End Caps or Parking Stop and mark holes.
ASPHALT INSTALLATIONSpeed Humps, also use adhesive.



CONCRETE INSTALLATION 
For Speed Humps, also use adhesive.





ADHESIVE INSTALLATION





Epoxy dries hard, while Urethane remains flexible. Use whichever product is appropriate for your applicaon.






Speed Bump, Speed Hump, & Parking Stop
Installa�on Instruc�ons
Rev. 6/2022
Plas�cade.com
800-772-0355

/