Instruction manual
WWW.LIVOO.FR
USING YOUR APPLIANCE
TO KNOW BEFORE USE:
- This device should only be used on the hands (manicure) and feet (pedicure).
- Never press hard on the surface of the nail to be treated.
- Do not use the device in the bathroom as the effectiveness may be limited due to humidity.
- It is important to keep a thin layer of callus to maintain a natural skin barrier.
HOW TO USE YOUR MANICURE & PEDICURE SET
• Plug the adapter into the mains outlet, checking first that the voltage on the rating plate corresponds
to the mains outlet that is to be used.
• Now your Manicure & Pedicure Set is ready for use.
• Choose one of the interchangeable attachments with the product and start your treatment by applying
the 2-speed switch.
Warning: never use non-rechargeable batteries
EXCHANGE OF ACCESSORIES
• To connect the accessory to the unit, attach it to the manicure pen with a light touch.
• To change it, turn off the pen. Then simply remove the accessory from the manicure pen.
NAIL TREATMENT - MANICURE
• Carefully clean your hands.
• Choose your attachment and start filing and polishing.
• Once you're done, rinse your fingers in warm water and dry them again with the dry towel.
• Using the special cuticle attachment, push the cuticles to create a clean nail outline.
• Apply hand cream or moisturizer (not included) and use the fine grain cone (9) or thick grain disc (6/7)
to smooth the nail surface and remove cuticles around the nail.
• Apply the polishing cone (13) on the edge of the nails to file the sharp edges.
• Rinse and dry your nails.
FILING
• Place the silver filing disc in your hand held device.
• Switch the unit on and file your nails using small circular motions. Make sure the nail is filed in one
direction.
• To finish, buff your nail with the polishing disc ensuring a smooth shiny finish.
You can remove calloused and other hard skin areas with the callous file (one for rough skin and the other
one is for less rough skin), by slowly moving it evently over the callous area. If you have a problem with