CLS Revo Micro Inground Owner's manual

Brand
CLS
Model
Revo Micro Inground
Type
Owner's manual

CLS Revo Micro Inground is a versatile and durable LED fixture designed for in-ground applications. With its compact size and robust construction, it is ideal for illuminating pathways, driveways, and other outdoor areas. The fixture is equipped with high-power LEDs that deliver exceptional brightness and energy efficiency, and a range of lenses that allow you to customize the beam angle to suit your specific needs. The CLS Revo Micro Inground is IP67 rated, making it waterproof and dustproof, and it can withstand heavy loads of up to 15 kg/cm2.

CLS Revo Micro Inground is a versatile and durable LED fixture designed for in-ground applications. With its compact size and robust construction, it is ideal for illuminating pathways, driveways, and other outdoor areas. The fixture is equipped with high-power LEDs that deliver exceptional brightness and energy efficiency, and a range of lenses that allow you to customize the beam angle to suit your specific needs. The CLS Revo Micro Inground is IP67 rated, making it waterproof and dustproof, and it can withstand heavy loads of up to 15 kg/cm2.

www.cls-led.com www.cls-led.com
Floor 200 cm13,5 cm 10 cm 900 gr 50.000 h 20º 30º 66º 120º20 x 42º
Cree/Luxeon
100~240
VAC
Max.
5 Watt
IP67
15 kg/cm2
3000K
2700K Amber
4000K
h
ø
24 VAC/DC
IK10
DRIVER
INCLUDED
DRIVER
INTERNAL
SOFT
DIFFUSED
2
CLS REVO MICRO INGROUNDCLS REVO MICRO INGROUND
Manual V1.5 - March 2021
INDEX
Index 2
Safety information 2
Content 2
Technical 3
Specifications 3
CONTENT
SAFETY INFORMATION
Ambiance
Max. 40º
Block access
below the work
area when
maintaining
the unit
Use a source
of AC power
that complies to
local electrical
codes
Disconnect the
power supply
before installing
or maintaining
Don’t install in
a flammable
or explosive
area
Warning!
Some surfaces
can be hot
Do not stare
into the LED
Don’t modify
or install
genuine parts
on this product
Qualified
technician
Make sure all
connectors are
connected
properly
Installation 4
Lens replacement 5
Flooding 6
Lens index 7
List of symbols 8
Floor 200 cm13,5 cm 10 cm 900 gr 50.000 h 20º 30º 66º 120º20 x 42º
Cree/Luxeon
100~240
VAC
Max.
5 Watt
IP67
15 kg/cm2
3000K
2700K Amber
4000K
h
ø
24 VAC/DC
IK10
DRIVER
INCLUDED
DRIVER
INTERNAL
SOFT
DIFFUSED
www.cls-led.com www.cls-led.com
3 4
ø 110 mm
84 mm
140 mm
136 mm
14 mm
97,5 mm
Tools 3T20
TECHNICAL
SPECIFICATIONS
LED: High Power LED
Available colours: Extra warm white 2700K, warm white 3000K,
neutral white 4000K and amber
Lenses: 20º, 30º, 66º, 20 x 42º & 120º soft diffused
Power supply: 100 ~ 240 VAC / 24 VAC/DC
Power factor: > 0.90
Power consumption: Max. 5 Watt
Housing: Coated aluminum / plastic sleeve
Weight: 900 gr
IP value: IP67
IK value: IK10
Cable length: 2 meter
Measurements: 140 x 110 mm (hxø)
Ambient temperature: -20º C till +50º C
ACCESSORIES
871992 CLS mold set, straight 8-26mm
871995 CLS mold set Paguro grey
1
4
5
2
3
L = Brown
N = Blue
= Yellow/green
871995 CLS mold set Paguro
ø 98 mm
136 mm
Make sure
that the
REVO Micro
Inground is
xated in
the hole
The
cable of the
REVO Inground
also needs to
be burried into
the ground
200 cm cable
e.g. PVC pipe
Gravel for drainage conditions
Follow
Paguro manual
24 VAC/DC100 ~ 240 VAC6
+ = Brown / Red
= Blue / Black
INSTALLATION
www.cls-led.com www.cls-led.com
65
1
4
7
Glass +
Rubber ring
RVS ring
Front plate
Lens
3
2
5
8
6
unscrew
Next step on page 6
T20
10
9
4x
secure in
order
T20
4x
unscrew
3
4x
Secure in
order
3
4x
1
1
23
4
23
4
Front plate
Glass +
Rubber ring
RVS ring
FLOODING
LENS REPLACEMENT
1
4
7
Glass +
Rubber ring
RVS ring
Front plate
Lens
3
2
5
8
6
unscrew
Next step on page 6
T20
10
9
4x
secure in
order
T20
4x
unscrew
3
4x
Secure in
order
3
4x
1
1
23
4
23
4
Front plate
Glass +
Rubber ring
RVS ring
www.cls-led.com www.cls-led.com
7 8
LENS INDEX
4
12
3
Medium Flood 30º
Spot 20º
Wide Flood 66º Elliptical 20x42º
2021 CLS-LED BV. All rights reserved. Information subject to change without notice, CLS-LED BV and all aliated companies disclaim
liability for injury, damage direct or indirect loss, consequential or economic loss or any other loss occasioned by the use of, inability to
use or reliance on the information contained in this manual. No part of this manual may be reproduced, in any form or by any means,
without permission in writing from CLS-LED BV. Other legal information can be found in our General conditions, found on the back of
your CLS-LED BV invoice, inside the CLS catalogue or on our website www.cls-led.com/General-Terms.pdf
Multiple connection
Daisychain connectivity
Installation depth
In centimeters
Swivel
Fixture is horizontally rotatable,
indicated in degrees
Swivel
Fixture is vertically rotatable,
indicated in degrees
Installation size
In centimeters
Application area
Indoor or outdoor
Application area
Floor, wall or ceiling
Protection class
One, two or three
Cable length
Maximum cable attached
to the fixture in centimeters
Lifespan
Of the light source in hours
Driver
Inclusive or exclusive
Internal or external
Pressure
Maximum pressure on the
fixture in kg/cm2
Weight
In grams/kilograms
Curve
Minimal bending curve
in centimeters
LED pitch
Pitch between the LEDs
in millimeters
Power supply
In VDC, VAC or milliAmpere
Power consumption
In VA or Watt
IP value
Ingress Protection classifies the
degrees of protection provided against
the intrusion of the product
Cutting length
Indicated by the cutting
marks
LEDs
Kind of LED used in the
fixture
Lenses
Availble lenses,
indicated in degrees
Performance Zoom
Adjustable beam angle
Plug & play
Easy connection using the
SmartConnect system
White colour temperature
In dierent Kelvin values;
Cold white, neutral white, warm
white or extra warm white
Colour
Available colours;
Amber, blue, red or green
Colour changing
RGB, RGB-W, RGB-A,
AWB or Tunable White
DMX input
Fixture works on DMX512
protocol or Wireless DMX
Magno dimming
Accurate dimming from
100 - 1% by using a magnet
Dynamic Control
Dynamic Power Control or
Dynamic Temperature Control
Combined product
Compose your own fixture
Warranty
3 or 5 years warranty on
the product
Energy label
Conformité Européenne
CE marking for free marketability
of industrial goods within the EU
r
h
ø w d
Dimmable
1-10 Volt, Phase, individual,
DMX dimmable or DALI
DRIVER
INCLUDED
DRIVER
EXTERNAL
Retail & Food LED modules
Clothing, furniture, kitchens, jewellery,
shoes, bread, meat, fish and
vegetables & fruit.
Lightsource
Equipped with a CLS, Citizen or a Xicato
LED module
Bluetooth controlled
By Casambi
PWM dimming
Traditional PWM dimming, DMX analog
or DMX Hybrid dim
CLS
DYNAMIC
COLOUR
COB
LIST OF SYMBOLS
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

CLS Revo Micro Inground Owner's manual

Brand
CLS
Model
Revo Micro Inground
Type
Owner's manual

CLS Revo Micro Inground is a versatile and durable LED fixture designed for in-ground applications. With its compact size and robust construction, it is ideal for illuminating pathways, driveways, and other outdoor areas. The fixture is equipped with high-power LEDs that deliver exceptional brightness and energy efficiency, and a range of lenses that allow you to customize the beam angle to suit your specific needs. The CLS Revo Micro Inground is IP67 rated, making it waterproof and dustproof, and it can withstand heavy loads of up to 15 kg/cm2.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents