Dormakaba RCI 909 Rocker Switch Installation guide

Brand: Dormakaba

Model: RCI 909 Rocker Switch

Type: Installation guide

www.dormakaba.us • Phone: 1.800.265.6630 • Fax: 1.800.482.9795 • E-mail: sales_RCI@dormakaba.comIS909

PCN2208

R11-22GR

INSTALLATION

RCI 909

SURFACE AND FLUSH MOUNT ROCKER SWITCHES

909 SURFACE MOUNT INSTRUCTIONS

1. Remove decorative bezel around switch.

Optional: * To convert the momentary switch

provided to maintained switch mode, carefully

remove the spring located under the rocker

switch with a small screwdriver or pliers.

2. Mount switch base in desired location.

3. Connect wires under appropriate terminals

(Fig. 1).

4. Replace decorative bezel.

Fig. 2

909 FLUSH MOUNT INSTRUCTIONS

1. Pry off decorative bezel around switch and

remove toggle.

2. Cut a 2-1/4” x 1-1/4” hole in the drywall.

3. Connect wires under appropriate terminals

(Fig. 2).

4. Insert switch into hole. Tighten the two metal

slot screws, until switch is secure.

5. Replace toggle and decorative bezel.

Fig. 1

10A

10A 250V

250V

C - Power In

N/C Contact

Power Out

N/O Contact

Power Out

Switch Mode Switch Conguration Switch Rating Standard Finish

Momentary Action * SPDT N/O or N/C 10A @250V Beige (plastic)

NOTE: Specications are subject to change without notice.

N/C - Normally Closed, N/O - Normally Open, C - Common

* Surface mounted switches only may be converted to Maintained Switch Mode.

Power In

N/O Contact - Power Out

N/C Contact - Power Out

IS909_R1122.indd 1 11/3/2022 11:57:04 AM

Dormakaba RCI 909 Rocker Switch Installation guide

Dormakaba RCI 909 Rocker Switch Installation guide

Dormakaba RCI 909 Rocker Switch Installation guide

Related papers

Other documents