PetGear PG9924EXP Pet Ramp Extension Panel User manual

Type
User manual

PetGear PG9924EXP Pet Ramp Extension Panel is designed to extend the length of your PetGear Ultra-Lite Free-Standing Pet Ramp (PG9940CHSX), making it easier for your pet to reach higher vehicles. It can support pets weighing up to 100 lbs and features a locking mechanism to keep it securely in place. The extension panel also has a non-slip surface for added safety. Please note that it should only be used with the PetGear Ultra-Lite Free-Standing Pet Ramp and is not intended for use with other ramps or as a standalone product.

PetGear PG9924EXP Pet Ramp Extension Panel is designed to extend the length of your PetGear Ultra-Lite Free-Standing Pet Ramp (PG9940CHSX), making it easier for your pet to reach higher vehicles. It can support pets weighing up to 100 lbs and features a locking mechanism to keep it securely in place. The extension panel also has a non-slip surface for added safety. Please note that it should only be used with the PetGear Ultra-Lite Free-Standing Pet Ramp and is not intended for use with other ramps or as a standalone product.

INSTRUCTION MANUAL
PET RAMP EXTENSION PANEL WITH
PG9924EXP
To see our full line of products, visit us online at: www.petgearinc.com
CUSTOMER SERVICE HELP DESK
Toll-Free 877-752-9123 - Eastern Standard Time 8am-3pm, Monday through Friday
For The ON-THE-GO Pet
For Pets
Up To
100 lbs
supertraXTM
PET RAMP EXTENSION PANEL • PG9924EXP
2
PARTS LIST
INSTRUCTIONS FOR USE
Step 1. Watch for pinch points while assembling Extension Panel. Secure extension panel into place by
pushing downward locking it into place on Ultra-Lite Free-Standing Pet Ramp.
Check that you have all the parts shown BEFORE assembling your product.
If any parts are missing, call Customer Service.
Extension Panel
Please Note: Pet ramp Extension Panel is only to be
used with Pet Gear Ultra-Lite Free-Standing Pet Ramp (PG9940CHSX)
Step 2. Make sure Extension Panel sits
on top of vehicle seat securely before
loading your pet.
Push Downward
Please Note: If there is too much of an air gap under Extension Panel
and vehicle seat add a towel under the Extension Panel to fill in the
air gap, doing this will make the ramp more stable.
3
PET RAMP EXTENSION PANEL • PG9924EXP
WARNING!
FOR PETS ONLY.
Not intended to be used as a restraining device for aggressive or dangerous animals that dig, chew or paw
aggressively. Do not leave your pet unattended.
PET GEAR
is not liable for any damage caused by aggressive,
warnings and the instructions could result in serious injury or death.
• Before use, be sure Ramp and Extension Panel is installed according to instructions.
• Use as a pet ramp ONLY!
• Do not use to load people or other objects.
• Never leave the ramp unattended.
• The ramp is designed to support a maximum load of 100 lbs. when installed properly.
• Exceeding the load limit will void the product warranty and may cause injury to the pet or pet owner.
• Never use the ramp while the vehicle is in motion.
REPLACEMENT PARTS
Use only PET GEAR replacement parts.
Please have your model number ready before calling.
You can also request parts: http://www.petgearinc.com/main.asp?sel=2
192 Sheldon Avenue West Rutland, VT 05777 877-752-9123 www.petgearinc.com
  • Page 1 1
  • Page 2 2
  • Page 3 3

PetGear PG9924EXP Pet Ramp Extension Panel User manual

Type
User manual

PetGear PG9924EXP Pet Ramp Extension Panel is designed to extend the length of your PetGear Ultra-Lite Free-Standing Pet Ramp (PG9940CHSX), making it easier for your pet to reach higher vehicles. It can support pets weighing up to 100 lbs and features a locking mechanism to keep it securely in place. The extension panel also has a non-slip surface for added safety. Please note that it should only be used with the PetGear Ultra-Lite Free-Standing Pet Ramp and is not intended for use with other ramps or as a standalone product.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI