Specifications
MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158
NOTE: THE INSTALLATION SHOWN IS FOR TILE DECKS, THIS VALVE WILL ALSO FIT STEEL, CAST IRON OR PLASTIC DECKS
1-1/4" (32mm) MAX.
4-1/2" (114mm)
MINIMUM
VALVE BODY DIA.
1-1/8" (29mm)
SPOUT SHANK DIA.
27/32" (21mm)
STREAM
FORMER
7/8" (22mm) MAX.
Handle Base
2-7/8"
(62mm) DIA
2-9/16"
Spout Base
3-1/2" (89mm) DIA
SPOUT POST
INSTALLS THRU
7/8" (22mm) MINIMUM
DIAMETER HOLE.
10-5/8" (270mm)
2-7/8"
(73mm)
VALVE BODY
INSTALLS THRU
1-3/16" (30mm) MINIMUM
DIAMETER HOLE.
2-7/8"
(73mm)
ADA
KINGSLEY™
Roman Tub Trim Only
Models: T910, T910CP, T910BN, T910P,
T910WR, T910AN, T910ORB
DESCRIPTION
• Metal construction with chrome plated, antique nickel,
oil rubbed bronze, wrought iron, LifeShine
®
polished
brass or brushed nickel finishes
• For installations from 8" (203mm) to 10" (254mm) centers
• Designed to be installed on decks up to 2-1/8" (54mm)
• The tub fill spout is a slip fit design and the supplies
are 1/2" type K, copper tubing
• Hot and Cold indicators included
OPERATION
• Lever style handles
• Can be installed with any Moen Deck Mounted
Roman Tub Trim Kit
• Rotate hot side handle counterclockwise to open
(clockwise to close) and the cold side handle
(clockwise to open) and (counterclockwise to close)
FLOW
• Designed to deliver 18 gpm at 40 psi (68 L/min).
CARTRIDGE
• Nonmetallic and stainless steel materials
STANDARDS
• Designed and manufactured to comply with
the applicable requirements of: CSA B-125 and ASME
A112.18.1M and all applicable requirements referenced
therein and complies with the applicable requirements
of ANSI A117.1
WARRANTY
• Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
Rev. 3/04
/