2. Computers & electronics
  3. Data storage
  4. Data storage devices
  5. Solid state drives
  6. OCZ
  7. 1TB m84 PCI-E SSD

OCZ 1TB m84 PCI-E SSD, 250GB m84 PCI-E SSD, 512GB e84 PCI-E SSD, 512GB m84 PCI-E SSD, Z-DRIVE User manual

  • Hello! I am an AI chatbot trained to assist you with the OCZ 1TB m84 PCI-E SSD User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1. Locate the 4-pin molex power connector
from your power supply.
2. Plug the power connector into your
Z-Drive
3. Locate an x8 or x16 PCI-Express slot and
carefully seat the drive. Be sure you have
consulted the motherboard compatibility
guidelines before installing the Z-Drive.
The motherboard compatibility guideline
is available online at
www.ocztechnology.com.
4. To set the Z-Drive as your primary boot device, you must first
define in the BIOS. It will appear as a SCSI “LUN0 LSI LOGIC”
drive.
If you are using your Z-Drive in a pre-Vista Service Pack 2, you may need to install the appropriate
drivers. Drivers are available online at www.ocztechnology.com
Z-DRIVE QUICKSTART GUIDE
/