Dell Vostro 270s Owner's manual

Vostro 270s
Dell
Brand
Dell
Model
Vostro 270s
Category
Mini PCs
Type
Owner's manual

This manual is also suitable for

Dell Vostro 270s
Owner’s Manual
Regulatory Model: D06S
Regulatory Type: D06S001
Notes, Cautions, and Warnings
NOTE: A NOTE indicates important information that helps you make better use of your computer.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
© 2012 Dell Inc.
Trademarks used in this text: Dell
™
, the DELL logo, Dell Precision
™
, Precision ON
™
,ExpressCharge
™
, Latitude
™
, Latitude ON
™
,
OptiPlex
™
, Vostro
™
, and Wi-Fi Catcher
™
are trademarks of Dell Inc. Intel
®
, Pentium
®
, Xeon
®
, Core
™
, Atom
™
, Centrino
®
, and Celeron
®
are registered trademarks or trademarks of Intel Corporation in the U.S. and other countries. AMD
®
is a registered trademark and
AMD Opteron
™
, AMD Phenom
™
, AMD Sempron
™
, AMD Athlon
™
, ATI Radeon
™
, and ATI FirePro
™
are trademarks of Advanced Micro
Devices, Inc. Microsoft
®
, Windows
®
, MS-DOS
®
, Windows Vista
®
, the Windows Vista start button, and Office Outlook
®
are either
trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Blu-ray Disc
™
is a trademark
owned by the Blu-ray Disc Association (BDA) and licensed for use on discs and players. The Bluetooth
®
word mark is a registered
trademark and owned by the Bluetooth
®
SIG, Inc. and any use of such mark by Dell Inc. is under license. Wi-Fi
®
is a registered
trademark of Wireless Ethernet Compatibility Alliance, Inc.
2012 - 10
Rev. A00
Contents
Notes, Cautions, and Warnings...................................................................................................2
1 Working on Your Computer.......................................................................................................5
Before Working Inside Your Computer.....................................................................................................................5
Turning Off Your Computer.......................................................................................................................................6
After Working Inside Your Computer........................................................................................................................6
2 Removing and Installing Components.....................................................................................7
Recommended Tools................................................................................................................................................7
Removing the Cover..................................................................................................................................................7
Installing the Cover...................................................................................................................................................8
Removing the Front Bezel.........................................................................................................................................8
Installing the Front Bezel..........................................................................................................................................9
Removing the Fan Shroud.........................................................................................................................................9
Installing the Fan Shroud........................................................................................................................................10
Removing the Drive Cage.......................................................................................................................................10
Installing the Drive Cage.........................................................................................................................................12
Removing the Optical Drive....................................................................................................................................12
Installing the Optical drive......................................................................................................................................12
Removing the Hard Drive........................................................................................................................................13
Installing the Hard drive..........................................................................................................................................13
Removing the Expansion Card................................................................................................................................14
Installing the Expansion Card.................................................................................................................................14
Removing the Coin-Cell Battery..............................................................................................................................14
Installing the Coin-Cell Battery...............................................................................................................................15
Removing the Memory............................................................................................................................................15
Installing the Memory.............................................................................................................................................15
Removing the Power Switch...................................................................................................................................15
Installing the Power Switch....................................................................................................................................16
Removing the Heat-Sink Assembly.........................................................................................................................16
Installing the Heat-Sink Assembly..........................................................................................................................17
Removing the Input/Output (I/O) Panel...................................................................................................................17
Installing the I/O Panel............................................................................................................................................19
Removing the Processor.........................................................................................................................................19
Installing the Processor..........................................................................................................................................20
Removing the System Board...................................................................................................................................20
System Board Components....................................................................................................................................21
Installing the System Board....................................................................................................................................21
Removing the Power-Supply Unit...........................................................................................................................22
Installing the Power-Supply Unit............................................................................................................................22
3 System Setup.............................................................................................................................25
Boot Sequence.......................................................................................................................................................25
Navigation Keys......................................................................................................................................................25
System Setup Overview..........................................................................................................................................26
Enter System Setup................................................................................................................................................26
System Setup Screens............................................................................................................................................26
System Setup Options.............................................................................................................................................27
Exit....................................................................................................................................................................29
Updating the BIOS .................................................................................................................................................29
Clearing Forgotten Password.................................................................................................................................30
Clearing CMOS.......................................................................................................................................................31
System and Setup Password..................................................................................................................................32
Assigning a System Password and Setup Password......................................................................................32
Deleting or Changing an Existing System and/or Setup Password..................................................................33
Disabling a System Password..........................................................................................................................33
4 Diagnostics.................................................................................................................................35
Enhanced Pre-Boot System Assessment (ePSA) Diagnostics...............................................................................35
5 Technical Specification...........................................................................................................37
6 Contacting Dell..........................................................................................................................41
1
Working on Your Computer
Before Working Inside Your Computer
Use the following safety guidelines to help protect your computer from potential damage and to help to ensure your
personal safety. Unless otherwise noted, each procedure included in this document assumes that the following
conditions exist:
• You have read the safety information that shipped with your computer.
• A component can be replaced or--if purchased separately--installed by performing the removal procedure in
reverse order.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For
additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/
regulatory_compliance
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically
touching an unpainted metal surface, such as a connector on the back of the computer.
CAUTION: Handle components and cards with care. Do not touch the components or contacts on a card. Hold a
card by its edges or by its metal mounting bracket. Hold a component such as a processor by its edges, not by its
pins.
CAUTION: When you disconnect a cable, pull on its connector or on its pull-tab, not on the cable itself. Some
cables have connectors with locking tabs; if you are disconnecting this type of cable, press in on the locking tabs
before you disconnect the cable. As you pull connectors apart, keep them evenly aligned to avoid bending any
connector pins. Also, before you connect a cable, ensure that both connectors are correctly oriented and aligned.
NOTE: The color of your computer and certain components may appear differently than shown in this document.
To avoid damaging your computer, perform the following steps before you begin working inside the computer.
1. Ensure that your work surface is flat and clean to prevent the computer cover from being scratched.
2. Turn off your computer (see Turning Off Your Computer).
CAUTION: To disconnect a network cable, first unplug the cable from your computer and then unplug the
cable from the network device.
3. Disconnect all network cables from the computer.
4. Disconnect your computer and all attached devices from their electrical outlets.
5. Press and hold the power button while the computer is unplugged to ground the system board.
6. Remove the cover.
5
CAUTION: Before touching anything inside your computer, ground yourself by touching an unpainted metal
surface, such as the metal at the back of the computer. While you work, periodically touch an unpainted metal
surface to dissipate static electricity, which could harm internal components.
Turning Off Your Computer
CAUTION: To avoid losing data, save and close all open files and exit all open programs before you turn off your
computer.
1. Shut down the operating system:
– In Windows 7:
Click Start , then click Shut Down.
– In Windows Vista:
Click Start , then click the arrow in the lower-right corner of the Start menu as shown below, and then
click Shut Down.
– In Windows XP:
Click Start → Turn Off Computer → Turn Off . The computer turns off after the operating system shutdown
process is complete.
2. Ensure that the computer and all attached devices are turned off. If your computer and attached devices did not
automatically turn off when you shut down your operating system, press and hold the power button for about 6
seconds to turn them off.
After Working Inside Your Computer
After you complete any replacement procedure, ensure you connect any external devices, cards, and cables before
turning on your computer.
1. Replace the cover.
CAUTION: To connect a network cable, first plug the cable into the network device and then plug it into the
computer.
2. Connect any telephone or network cables to your computer.
3. Connect your computer and all attached devices to their electrical outlets.
4. Turn on your computer.
5. If required, verify that the computer works correctly by running the Dell Diagnostics.
6
2
Removing and Installing Components
This section provides detailed information on how to remove or install the components from your computer.
Recommended Tools
The procedures in this document may require the following tools:
• Small flat-blade screwdriver
• Phillips screwdriver
• Small plastic scribe
Removing the Cover
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the screws that secure the cover to the computer to slide and lift the cover upwards to remove it from the
computer.
7
Installing the Cover
1. Align the cover along its tabs on the chassis and slide the cover to its original position.
2. Tighten the screws to secure the cover to the computer.
3. Follow the procedures in
After Working Inside Your Computer
.
Removing the Front Bezel
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the cover.
3. Pry the front panel retention clips away from the chassis located at the edge of front bezel.
4. Rotate the front bezel away from the computer to release the hooks on the opposite edge of the bezel from the
chassis.
8
Installing the Front Bezel
1. Insert the hooks along the bottom edge of the front bezel into the slots on the chassis front.
2. Rotate the bezel toward the computer to engage the front-panel retention clips until they click into place.
3. Install the cover.
4. Follow the procedures in
After Working Inside Your Computer
.
Removing the Fan Shroud
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the cover.
3. Press in on the fan shroud to lift and release the tabs securing the fan shroud and remove it from the computer.
9
Installing the Fan Shroud
1. Place the fan shroud over the processor fan and heat-sink assembly.
2. Press the fan shroud until the tabs on the fan shroud snap into place.
3. Install the cover.
4. Follow the procedures in
After Working Inside Your Computer
.
Removing the Drive Cage
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a) cover
b) fan shroud
c) front bezel
3. Disconnect the power and data cables from the hard drive and the optical drive.
10
4. Remove the screws that secure the drive cage and lift the drive cage to remove it from the computer.
11
Installing the Drive Cage
1. Tighten the screws to secure the drive cage to the computer.
2. Connect the data cable and power cable to the back of the hard drive and the optical drive.
3. Install:
a) front bezel
b) fan shroud
c) cover
4. Follow the procedures in
After Working Inside Your Computer
.
Removing the Optical Drive
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a) cover
b) fan shroud
c) front bezel
d) drive cage
3. Remove the screws that secure the optical drive to the drive cage and slide the optical drive out of the drive cage.
Installing the Optical drive
1. Slide the optical drive into the drive cage.
2. Align the screw holes on the optical drive with the screw holes on the drive cage.
3. Tighten the screws to secure the optical drive to the drive cage.
4. Install:
12
a) drive cage
b) front bezel
c) fan shroud
d) cover
5. Follow the procedures in
After Working Inside Your Computer
.
Removing the Hard Drive
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a) cover
b) fan shroud
c) front bezel
d) drive cage
3. Remove the screws that secure the hard drive to the drive cage and slide the hard drive out of the drive cage.
Installing the Hard drive
1. Slide the hard drive into the drive cage.
2. Align the screw holes on the hard drive with the screw holes on the drive cage.
3. Tighten the screws that secure the hard drive to the drive cage.
4. Install:
a) drive cage
b) front bezel
c) fan shroud
d) cover
13
5. Follow the procedures in
After Working Inside Your Computer
.
Removing the Expansion Card
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a) cover.
b) fan shroud.
3. Remove the screw that secures the expansion card to the chassis. Press down the securing tab, grasp the card
and ease it out of its connector.
Installing the Expansion Card
1. Insert the expansion card into it's connector on the system board and press down until it is securely in place.
2. Tighten the screw to secure the expansion card to the chassis.
3. Install:
a) fan shroud.
b) cover.
4. Follow the procedures in
After Working Inside Your Computer
.
Removing the Coin-Cell Battery
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a) cover
b) fan shroud
c) drive cage
3. Press the release latch away from the battery to allow the battery to pop-up and lift the coin-cell battery out of the
computer.
14
Installing the Coin-Cell Battery
1. Place the coin-cell battery into its slot on the system board.
2. Press the coin-cell battery downward until the release latch springs back into place and secures it.
3. Install :
a) drive cage
b) fan shroud
c) cover
4. Follow the procedures in
After Working Inside Your Computer
.
Removing the Memory
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a) cover.
b) fan shroud
c) drive cage
3. Press down on the memory retention tabs on each side of the memory module, and lift the memory module(s) out of
the connectors on the system board.
Installing the Memory
1. Align the notch on the memory-card with the tab on the system-board connector.
2. Press down on the memory module until the retention tabs spring back to secure them in place.
3. Install:
a) drive cage
b) fan shroud
c) cover.
4. Follow the procedures in
After Working Inside Your Computer
.
Removing the Power Switch
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
15
a) cover
b) fan shroud
c) front bezel
d) drive cage
3. Disconnect the power-switch cable from the system board and remove the cables from their routing channels.
Press the power-switch tabs to release the power switch from the front panel and slide the power switch along
with its cable through the slot on the front panel.
Installing the Power Switch
1. Slide the power-switch along its cable through the slot on the front panel.
2. Align and push the power-switch tabs into the slots on the front panel.
3. Route the power-switch cable through the routing channels on the computer.
4. Connect the power-switch cable to the system board.
5. Install:
a) drive cage
b) front bezel
c) fan shroud
d) cover
6. Follow the procedures in
After Working Inside Your Computer
.
Removing the Heat-Sink Assembly
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a) cover
b) fan shroud
3. Disconnect the fan cable from the system board. Loosen the captive screws that secure the heat-sink assembly to
the computer and remove it from the computer.
16
Installing the Heat-Sink Assembly
1. Align the captive screws on the heat-sink assembly with the screw holes on the system board.
2. Tighten the captive screws to secure heat-sink assembly to the system board.
3. Connect the fan cable to the system board.
4. Install:
a) fan shroud.
b) cover.
5. Follow the procedures in
After Working Inside Your Computer
.
Removing the Input/Output (I/O) Panel
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a) cover
b) fan shroud
c) front bezel
d) drive cage
e) expansion card
3. Disconnect the I/O panel cables from the system board
17
4. Remove the I/O panel cables from the routing channels on the chassis.
5. Remove the screw that secures the I/O panel to the front panel and slide the I/O panel toward the side and pull it
out of the front panel.
18
Installing the I/O Panel
1. Insert the I/O panel into the slot on the front panel.
2. Slide the I/O panel to align it with the screw holes on the front panel.
3. Tighten the screw to secure the I/O panel to the front panel.
4. Route the I/O panel cables through the routing channels on the chassis.
5. Connect the I/O panel cables to the system board.
6. Install:
a) expansion card
b) drive cage
c) front bezel
d) fan shroud
e) cover
7. Follow the procedures in
After Working Inside Your Computer
.
Removing the Processor
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a) cover
b) fan shroud
c) heat-sink assembly
3. Press the release lever down and then move it outward to release it from the retention hook. Lift the processor
cover and remove the processor from the socket, and place it in antistatic bag.
19
Installing the Processor
1. Insert the processor into the processor socket. Ensure the processor is properly seated.
2. Lower the processor cover.
3. Press the release lever down and then move it inward to secure it with the retention hook.
4. Install:
a) heat-sink assembly
b) fan shroud
c) cover
5. Follow the procedures in
After Working Inside Your Computer
.
Removing the System Board
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a) cover
b) fan shroud
c) front bezel
d) drive cage
e) memory
f) expansion card
g) heat-sink assembly
h) processor
3. Disconnect all the cables connected to the system board.
4. Remove the screws that secure the system board to the chassis and lift the system board up and out of the chassis.
20
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41

Dell Vostro 270s Owner's manual

Vostro 270s
Dell
Brand
Dell
Model
Vostro 270s
Category
Mini PCs
Type
Owner's manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents