Supermicro X10SLV-Q User manual

Brand: Supermicro

Model: X10SLV-Q

Category: Motherboards

Type: User manual

X10SLV

X10SLV-Q

USER’S MANUAL

Revision 1.0

Manual Revision 1.0

Release Date: September 18, 2013

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document. Information in this document is subject to change without notice.

Other products and companies referred to herein are trademarks or registered trademarks of their

respective companies or mark holders.

Printed in the United States of America

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE

USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.

SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class B

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason-

able protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

manufacturer’s instruction manual, may cause interference with radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by turn-

ing the equipment off and on, you are encouraged to try to correct the interference by one or more

of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and the receiver.

•Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

•Consult the dealer or an experienced radio/television technician for help.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

WARNING: Handling of lead solder materials used in this product

may expose you to lead, a chemical known to the State of California

to cause birth defects and other reproductive harm.

iii

Preface

About This Manual

This manual is written for system integrators, PC technicians and

knowledgeable PC users. It provides information for the installation and use of the

X10SLV/-Q motherboard. This product is intended to be professionally

installed and serviced by a technician.

About This Motherboard

The X10SLV/-Q motherboard is a value-driven product aimed at users who de-

mand a small form-factor, LGA-1150 based PC, for gateway server or embedded

applications.

The X10SLV/-Q Motherboard features a 4th generation Intel® Core™ i7/i5/i3,

Pentium® or Celeron® processor and offering many features such as support for

up to 16GB of memory on two vertical SODIMM sockets, two SATA 3.0 ports, two

SATA2.0ports,vehigh-speedserialports,anon-boardVESA®DisplayPortand

a miniPCIe port. The X10SLV/-Q also supports up to two independent displays

(three on the X10SLV/-Q). These enable the X10SLV/-Q Motherboard to deliver an

intermediate performance platform, in a small form-factor.

Manual Organization

Chapter 1describesthefeatures,specicationsandperformanceofthemainboard

and provides detailed information about the chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when in-

stalling the processor, memory modules and other hardware components into the

system. If you encounter any problems, see Chapter 3, which describes trouble-

shooting procedures for video, memory and system setup stored in the CMOS.

Chapter 4 includes an introduction to the BIOS and provides detailed information

on running the CMOS Setup utility.

Appendix A provides BIOS Error Beep Codes.

Appendix B lists Driver Installation Instructions.

Appendix C provides the UEFI BIOS Recovery Instructions.

Preface

X10SLV/-Q Motherboard User’s Manual

Conventions Used in the Manual:

Special attention should be given to the following symbols for proper installation and

to prevent damage done to the components or injury to yourself:

Danger/Caution: Instructions to be strictly followed to prevent catastrophic

system failure or to avoid bodily injury

Warning: Critical information to prevent damage to the components or

data loss.

Important: Important information given to ensure proper system installa-

tion or to relay safety precautions.

Note: Additional Information given to differentiate various models or pro-

vides information for correct system setup.

Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Web Site: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Asia-Pacic

Address: Super Micro Computer, Inc.

3F, No.150, Jian 1st Rd.

Chung-Ho Dist., New Taipei City 235

Taiwan, R.O.C.

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3991

Web Site: www.supermicro.com.tw

Technical Support:

Email: [email protected]

Tel: 886-2-8226-5990

X10SLV/-Q Motherboard User’s Manual

Table of Contents

Preface

About This Manual ........................................................................................................ iii

About This Motherboard ................................................................................................ iii

Manual Organization .....................................................................................................iii

Conventions Used in the Manual: .................................................................................iv

Contacting Supermicro ...................................................................................................v

Chapter 1

Introduction

1-1 Overview ......................................................................................................... 1-1

Checklist .......................................................................................................... 1-1

X10SLV/-Q Image ....................................................................... 1-2

X10SLV/-Q Motherboard Layout ..................................................................... 1-3

X10SLV/-Q Quick Reference .......................................................................... 1-4

Ports, LEDs, and Connectors ......................................................................... 1-5

Jumper Descriptions ....................................................................................... 1-5

Motherboard Features ..................................................................................... 1-6

X10SLV/-Q Motherboard Block Diagram ........................................................ 1-8

1-2 Chipset Overview ........................................................................................... 1-9

1-3 PC Health Monitoring .................................................................................... 1-10

Recovery from AC Power Loss ..................................................................... 1-10

Onboard Voltage Monitoring ........................................................................ 1-10

Fan Status Monitor with Software ................................................................. 1-10

1-4 PowerCongurationSettings.........................................................................1-11

Slow Blinking LED for Suspend-State Indicator ............................................1-11

BIOS Support for USB Keyboard...................................................................1-11

Main Switch Override Mechanism .................................................................1-11

1-5 Power Supply .................................................................................................1-11

1-6 Super I/O ....................................................................................................... 1-12

Chapter 2

Installation

2-1 Standardized Warning Statements ................................................................. 2-1

Battery Handling .............................................................................................. 2-1

Product Disposal ............................................................................................. 2-3

2-2 Static-Sensitive Devices .................................................................................. 2-4

Precautions ..................................................................................................... 2-4

vii

Table of Contents

Unpacking ....................................................................................................... 2-4

2-3 Processor and Heatsink Installation................................................................ 2-5

Installing the LGA1150 Processor ................................................................. 2-5

Installing an Active CPU Heatsink with Fan ................................................... 2-8

Removing the Heatsink ................................................................................. 2-10

Tools Needed .................................................................................................2-11

Location of Mounting Holes ...........................................................................2-11

2-4 Motherboard Installation .................................................................................2-11

Installation Instructions .................................................................................. 2-12

2-5 System Memory ............................................................................................ 2-13

How to Install SO DIMMs ............................................................................. 2-13

Memory Support ............................................................................................ 2-13

The SO DIMM Socket ................................................................................... 2-14

2-6 Connectors/I/O Ports ..................................................................................... 2-15

Back Panel Connectors and I/O Ports .......................................................... 2-15

Universal Serial Bus (USB) ...................................................................... 2-16

Serial Ports (COM1~COM5) .................................................................... 2-17

VESA® DisplayPort™ (DisplayPort) ........................................................ 2-18

HDMI Port ............................................................................................... 2-18

DVI-I Port (DVI) ........................................................................................ 2-18

LAN Ports (LAN1/LAN2) .......................................................................... 2-19

Front Control Panel ....................................................................................... 2-20

JF1 Header Pins ...................................................................................... 2-20

FrontControlPanelPinDenitions............................................................... 2-21

Power LED .............................................................................................. 2-21

HDD LED .................................................................................................. 2-21

NIC1/NIC2 LED Indicators ....................................................................... 2-21

Overheat (OH)/Fan Fail LED.................................................................... 2-22

Reset Button ........................................................................................... 2-22

Power Button ........................................................................................... 2-22

2-7 Connecting Cables ........................................................................................ 2-23

24-pin ATX Power Connector (JPW1) .................................................... 2-23

4-pin ATX Power Connector (JPW2) ...................................................... 2-23

Fan Headers ............................................................................................. 2-24

Chassis Intrusion (JL1) ............................................................................ 2-25

TPM Header (JTPM1) .............................................................................. 2-25

SATA DOM Power (JSD1) ........................................................................ 2-26

System Management Bus (JSMB1) ......................................................... 2-26

GPIO Header (JGPIO 1) .......................................................................... 2-26

viii

X10SLV/-Q Motherboard User’s Manual

Mini PCI-E Slot (Mini PCIE) ..................................................................... 2-27

Front Panel Audio Control Header ........................................................... 2-28

Speaker (JD1) .......................................................................................... 2-29

Internal Speaker/Buzzer (SP1) ................................................................ 2-29

2-8 Jumper Settings ............................................................................................ 2-30

Explanation of Jumpers ............................................................................ 2-30

BIOS Recovery (JBR1) ............................................................................ 2-31

SMB (I

C) Bus to PCIe Slots.................................................................... 2-31

Front Panel Audio Enable (JPAC1) .......................................................... 2-31

Clear CMOS (JBT1) ................................................................................. 2-32

USB Wake-Up (JPUSB1) ......................................................................... 2-33

Watch Dog Reset (JWD1) ........................................................................ 2-34

ME Manufacturing Mode (JPME2) ........................................................... 2-34

2-9 Onboard Indicators ........................................................................................ 2-35

LAN Port LEDs ......................................................................................... 2-35

Standby Power LED (LED1) .................................................................... 2-35

2-10 Serial ATA and HDD Connections ................................................................. 2-36

SATA Connections (I-SATA0~I-SATA3) .................................................... 2-36

Chapter 3

Troubleshooting

3-1 Troubleshooting Procedures ........................................................................... 3-1

Before Power On ............................................................................................ 3-1

No Power ........................................................................................................ 3-1

No Video ......................................................................................................... 3-1

Memory Errors ............................................................................................... 3-2

IfYouLosetheSystem’sSetupConguration ............................................... 3-2

3-2 Technical Support Procedures ........................................................................ 3-2

3-3 Frequently Asked Questions ........................................................................... 3-3

3-4 Returning Merchandise for Service................................................................. 3-5

Chapter 4

BIOS

4-1 Introduction ...................................................................................................... 4-1

Starting BIOS Setup Utility .............................................................................. 4-1

HowToChangetheCongurationData ......................................................... 4-1

How to Start the Setup Utility ......................................................................... 4-2

4-2 Main Setup ...................................................................................................... 4-2

The following Main menu items will be displayed: ..................................... 4-2

Table of Contents

System Date/System Time ........................................................................ 4-3

Supermicro X10SLV/-Q .............................................................................. 4-3

Version ........................................................................................................ 4-3

Build Date ................................................................................................... 4-3

Memory Information ................................................................................... 4-3

Total Memory .............................................................................................. 4-3

4-3 AdvancedSetupCongurations...................................................................... 4-4

Boot Feature ................................................................................................... 4-4

Quiet Boot .................................................................................................. 4-4

AddOn ROM Display Mode ........................................................................ 4-4

Bootup Num-Lock ....................................................................................... 4-4

Wait For 'F1' If Error ................................................................................... 4-5

Interrupt 19 Capture ................................................................................... 4-5

Re-try Boot ................................................................................................. 4-5

PowerConguration ........................................................................................ 4-5

Watch Dog Function ................................................................................... 4-5

Power Button Function ............................................................................... 4-5

Restore on AC Power Loss ........................................................................ 4-5



CPUConguration ....................................................................................... 4-6

Clock Spread Spectrum ............................................................................ 4-7

Hyper-threading .......................................................................................... 4-7

Active Processor Cores .............................................................................. 4-7

Limit CPUID Maximum ............................................................................... 4-7

Execute Disable Bit .................................................................................... 4-7

Intel® Virtualization Technology ................................................................. 4-7

Hardware Prefetcher .................................................................................. 4-7

Adjacent Cache Line Prefetch ................................................................... 4-8

CPU AES .................................................................................................... 4-8

Boot Performance Mode ............................................................................ 4-8

EIST ............................................................................................................ 4-8

Turbo Mode ................................................................................................ 4-8

Energy Performance ................................................................................ 4-10

VR Current Value ..................................................................................... 4-10

CPU C States ........................................................................................... 4-10

Package C-State limit ................................................................................4-11

ACPI T State ............................................................................................ 4-12



ChipsetConguration ................................................................................. 4-12

X10SLV/-Q Motherboard User’s Manual



SystemAgent(SA)Conguration .............................................................. 4-12

VT-d .......................................................................................................... 4-12



GraphicsConguration ............................................................................... 4-12

Primary Display ........................................................................................ 4-13

CPU IGFX ................................................................................................ 4-13

GTT Size .................................................................................................. 4-13

Aperture Size ............................................................................................ 4-13

DVMT Pre-Allocated ................................................................................. 4-13

DVMT (Dynamic Video Memory Technology) Total Gfx Mem .................. 4-13

Gfx (Graphics) Low Power Mode ............................................................. 4-14



PCH-IOConguration ................................................................................ 4-16

Legacy USB Support ................................................................................ 4-16

XHCI Hand-Off ......................................................................................... 4-16

EHCI Hand-Off ......................................................................................... 4-17

XHCI Mode ............................................................................................... 4-17

Frontside Audio Mode .............................................................................. 4-17

Deep Sx Power Policies ........................................................................... 4-17



SATAConguration .................................................................................... 4-17

SATA Controllers ...................................................................................... 4-17

SATA Mode Selection ............................................................................... 4-17



PCIe/PCI/PnPConguration ..................................................................... 4-19

Above 4G Decoding ................................................................................. 4-19

VGA Palette Snoop .................................................................................. 4-19

SLOT1 PCI-E 2.0 X16 OPROM (X10SLV only) ....................................... 4-19

SLOT1 PCI-E 3.0 X16 OPROM (X10SLV-Q only) ................................... 4-19

Launch Storage OPROM Policy............................................................... 4-19

Other PCI Device ROM Priority ............................................................... 4-19

Onboard LAN1/Onboard LAN2 ................................................................ 4-19

Onboard LAN1 Option ROM/Onboard LAN2 Option ROM ...................... 4-20

Network Stack .......................................................................................... 4-20

Ipv4 PXE Support ..................................................................................... 4-20

Ipv6 PXE Support ..................................................................................... 4-20



ACPI Settings ............................................................................................ 4-20

High Precision Timer ................................................................................ 4-20

ACPI Sleep State ..................................................................................... 4-20



Trusted Computing .................................................................................... 4-21

Conguration ............................................................................................ 4-21

Current Status Information ....................................................................... 4-21

Intel TXT (LT) Support .............................................................................. 4-21



PCH-FWConguration ............................................................................... 4-22



FirmwareUpdateConguration ................................................................. 4-22

ME FW Image Re-Flash .......................................................................... 4-22



NCT6106DSuperIOConguration .......................................................... 4-22

NCT6106D Super IO Chip ....................................................................... 4-22



SerialPort1~5Conguration ................................................................ 4-22

Device Settings ........................................................................................ 4-22

Change Port Settings ............................................................................... 4-22

Transmit Mode (Serial Port 5) .................................................................. 4-23



NCT6106D H/W (Hardware) Monitor ......................................................... 4-23

PC Health Status ...................................................................................... 4-23

Fan Speed Control Mode ......................................................................... 4-23



Serial Port Console Redirection ................................................................. 4-24

4-4 Boot Settings ................................................................................................. 4-26

Set Boot Priority ....................................................................................... 4-26



Hard Disk Drive BBS Priorities ............................................................. 4-26



UEFI Boot Drive BBS Priorities............................................................. 4-26



Add New Boot Option ........................................................................... 4-27



Delete Boot Option ................................................................................ 4-27



Delete Driver Option ............................................................................. 4-27

4-5 Security Settings ........................................................................................... 4-28

Administrator Password ........................................................................... 4-28

HDDSecurityConguration ..................................................................... 4-28

4-6 Save & Exit ................................................................................................... 4-29

Discard Changes and Exit ...................................................................... 4-29

Save Changes and Reset ........................................................................ 4-29

Save Options ............................................................................................ 4-29

Save Changes .......................................................................................... 4-29

Discard Changes ...................................................................................... 4-29

Restore Optimized Defaults ..................................................................... 4-29

Save As User Defaults ............................................................................. 4-30

Restore User Defaults .............................................................................. 4-30

Boot Override ........................................................................................... 4-30

Table of Contents

xii

X10SLV/-Q Motherboard User’s Manual

Appendix A

POST Error Beep Codes

Recoverable POST Error Beep Codes ......................................................................A-1

Appendix B

Software Installation Instructions

B-1 Installing Drivers ..............................................................................................B-1

B-2 ConguringSuperoDoctorIII .........................................................................B-2

Appendix C

UEFI BIOS Recovery Instructions

C-1 An Overview to the UEFI BIOS ......................................................................C-1

C-2 How to Recover the UEFI BIOS Image (-the Main BIOS Block)....................C-1

C-3 To Recover the Boot Sector Using a USB-Attached Device ..........................C-1

Chapter 1: Introduction

1-1

Chapter 1

Introduction

1-1 Overview

Checklist

Congratulations on purchasing your computer motherboard from an acknowledged

leader in the industry. Supermicro boards are designed with the utmost attention to

detail and to provide you with the highest standards in quality and performance.

Please check that the following items have all been included with your motherboard.

If anything listed here is damaged or missing, contact your retailer.

All the following items are included in the retail box only.

•One (1) Supermicro Motherboard

•One (1) Quick Reference Guide

•Four (4) SATA cables

•One (1) I/O shield

1-2

X10SLV/-Q Motherboard User's Manual

X10SLV/-Q Image

Note: All graphics and images shown in this manual were based upon the latest

PCB Revision available at the time of publishing of the manual. The motherboard

you've received may or may not look exactly the same as the image shown in

this manual.

Chapter 1: Introduction

1-3

X10SLV/-Q Motherboard Layout

Important Notes to the User

•Jumpers not indicated are for testing only.

•See Chapter 2 for detailed information on jumpers, I/O ports and JF1 front

panel connections.

•" " indicates the location of "Pin 1".

1-4

X10SLV/-Q Motherboard User's Manual

X10SLV/-Q Quick Reference

(not drawn to scale)

JF1

Power Button

OH/Fan Fail LED

NIC1 LED

Reset Button

HDD LED

Power LED

Reset

PWR

LED_Anode+

Ground

NIC2 LED

LED_Anode+

I-SATA3

I-SATA2

JGPIO1

JPW2

JP1

JPCIE1

JSMB1

JBT1

BT1

COM4

COM3

COM5

JAUDIO1

JUSB2LAN2

JUSBLAN1

FAN3

FAN2

FAN1

LED1

JTPM1

JPAC1

JVR1

JPME2

JPUSB1

JWD1

JI2C1

JI2C2

JL1

JSD1

JD1

I-SATA0

I-SATA1

SP1

DIMMA1

DIMMB1

JPW1

UN-BUFFERED NON-ECC DDR3 SODIMM REQUIRED

AUDIO

BUZZER

2-3 BIOS RECOVERY

1-2 NORMAL

JBR1:

JF1:

LED

JD1:

USB4/5

USB10(TYPE-A)

JRF1:

On:PCIE2X8

O:PCIE1X16

LAN1

USB0/1(3.0)

COM1/2

BATTERY

AUDIO

DOGWATC H

HDMI

I2C BUS FOR PCI-E SLOT

ON:ENABLE

OFF:DISABLE

JI2C1/JI2C2:

VGA/DVI

JPAC1

1-2:ENABLE

2-3:DISABLE

JSMB1:SMBus1

1-2:NORMAL

2-3:ME MANUFACTURING MODE

JPME2:

X10SLV

JTPM1:TPM/PORT80

DOM POWER

FAN1/CPU

DIMMB1

CHASSIS INTRUSION

JSD1:SATA

SLOT1 PCI-E 2.0X16

1-4:SPKR

3-4:BUZZER

2-3:NMI

JWD1:

USB WAKE UP

1-2:ENABLE

2-3:DISABLE

JPUSB1:

1-2:RST

CMOS CLEAR

PWR

HDD

NIC1

NIC2

OH/

RST

LAN2

PWR

CPU

DIMMA1

USB2/3

PCIE

mini

JF1

JBR1

Audio Ports

Chapter 1: Introduction

1-5

Jumper Descriptions

Ports, LEDs, and Connectors

JBR1 BIOS Recovery Pins 1-2 (Normal)

JBT1 CMOS Clear Short contact pads to reset CMOS

C1/JI

C2 SMB to PCIe Slots Off (Disabled)

JPAC1 Audio Enable Pins 1-2 (Enabled)

JPME2 Intel ME Manufacturing Mode Select Pins 1-2 (Normal)

JWD1 Watch Dog Enable Pins 1-2 (Reset)

JPUSB1 USB Wake-Up Enable/Disable Pins 2-3 (Disabled)

Audio FP Front Panel Audio Header

AUDIO Ports Audio Connectors on the I/O backpanel. Not available on the X10SLV-Q.

Battery Onboard Battery

COM1/COM2 COM1 and COM2 Ports (on the I/O backpanel*)

COM3-COM5 COM3/COM4/COM5 Port Headers

Fan1-Fan3 System/CPU Fan Headers (Fan1: CPU Fan)

HDMI/DP DisplayPort (on the I/O backpanel)

JD1 Speaker/buzzer (Pins 3-4: Buzzer, Pins 1-4: External Speaker)

JF1 Front Panel Control Header

JL1 Chassis Intrusion Header

JPW1 24-pin ATX Power Connector

JPW2 12V 4-pin CPU power Connector (Required and alternative single power source.)

JSD1 SATA DOM (Device_On_Module) Power Connector

JTPM1 Trusted Platform Module (TPM) Header

LAN1/LAN2 Gigabit (RJ45) Ports LAN1 and LAN2 (on the I/O backpanel)

SP1 Internal Speaker/Buzzer

I-SATA0-3 X10SLV: (Intel-)Serial ATA (SATA 3.0) Ports 0-1 (6Gb/sec), Ports 2-3 (3Gb/s)

X10SLV:-Q (Intel-)Serial ATA (SATA 3.0) Ports 0-3 (6Gb/sec)

mini PCIE Mini PCIE Slot with mSATA support

Slot 1 PCI-Express 2.0 x16 Slot (X10SLV), PCI-Express 3.0 x16 (X10SLV-Q)

JGPIO 1 General Purpose I/O Expander Header

USB 0/1, 2/3 Backpanel USB 3.0 Ports 0/1 and USB 2.0 Ports 2/3

USB 4/5 Front Panel USB Header for USB 2.0 Ports 4/5

USB 10 Internal Type A USB 2.0 Port 10

DVI-I DVI (Combined Digital and Analog Video Interface) Port

JSMB1 System Management Bus (SMB) Header

LED1 Onboard Standby Power LED (Solid Green: Power On)

1-6

X10SLV/-Q Motherboard User's Manual

Motherboard Features

CPU Supports a single, 4th generation Intel® Core™ i7/i5/i3

processor (LGA1150)

Memory Two (2) SO-DIMM slots support up to 16 GB of DDR3,

1600/1333/1066 MHz, unbuffered, non-ECC SO-DIMM

memory

Supports One DIMM per Channel

DIMM sizes

SO-DIMM 2 GB, 4 GB and 8GB

Chipset X10SLV: Intel® H81 Express

X10SLV-Q: Intel® Q87 Express

Expansion Slots One (1) PCI-E x 16, Gen2 (Gen3 for X10SLV-Q only)

Graphics Intel Integrated Graphics

Independent Displays X10SLV: Two

X10SLV-Q: Three

Network Connections Two (2) RJ-45 Rear I/O Panel Connectors (Intel I217V +

I210AT)

I/O Devices SATA Connections

X10SLV Only

SATA 3.0 Ports Two (2)

SATA 2.0 Ports Two (2)

mSATA 3.0 Ports One (1) - Share with SATA3*

X10SLV-Q

SATA 3.0 Ports Four (4), RAID 0,1,5,10

mSATA 3.0 Ports One (1) - Share with SATA3*

*The mSATA port is shared with the SATA3 ports. Either the SATA3 ports are

used or the mSATA port, but not at the same time.

USB Devices

Two (2) USB 3.0 ports on the rear I/O panel

Six (6) USB 2.0 ports (2 on rear I/O panel, 2 via on board

headers, One (1) type A

Graphics

One (1) DisplayPort, One (1) DVI-I port, One (1) HDMI

Keyboard/Mouse

Keyboard/Mouse support via USB ports

Serial (COM) Ports

Five (5) COM ports (1 x RS232/422/485, 4 x RS232)

Chapter 1: Introduction

1-7

Super I/O

Nuvoton Super I/O NCT6106D

BIOS 16 MB SPI AMI BIOS

SM Flash BIOS

Plug and Play, ACPI 3.0 or later, USB Keyboard and

SMBIOS 2.7

Power ACPI/ACPM Power Management

S3, S4, S5

Wake-On-Ring (WOR), Wake-On-LAN (WOL)

One (1) Disk-On-Module (DOM) Power Connector

Power-on mode for AC power recovery

PC Health Monitoring CPU Monitoring

Onboard voltage monitors for CPU Vcore, VBAT, 3VCC,

3VSB, 12V, Chipset 1.05V , VDIMM, PCH Temp, System

Temp

CPU Thermal Trip support, Adaptive Thermal Monitor

PECI (Platform Environment Conguration Interface) 3.0

support

Fan Control

3-pin Fan Headers

Fan Speed Control

System Management Watch Dog

System resource alert via Supero Doctor III

SuperoDoctor III

Chassis Intrusion header and detection

CD Utilities BIOS ash upgrade utility

(Download from Website)

Drivers and software for Intel® H81 Express chipset utili-

ties (available for download)

Other ROHS 6/6 (Full Compliance)

Dimensions Mini-ITX form factor (6.7" x 6.7")

Model Chipset PCI Slot

Number of Inde-

pendent Displays

Backpanel Audio Ports

X10SLV H81 Express PCI-E 2.0 x16 Two Yes

X10SLV-Q Q87 Express PCI-E 3.0 x16 Three No

1-8

X10SLV/-Q Motherboard User's Manual

Note: This is a general block diagram. Please see the Motherboard Features pages

for details on the features of the motherboard.

X10SLV/-Q Motherboard Block Diagram

1600/1333/1066MHz

2 X USB 3.0 Rear

5Gbps

USB3.0

VRD12.5

INTEL LGA1150

PCIe x16 SLOT

PCIe2.0_x16

5.0GT/s

SVID

VRM 12.5

DDR3 (CHA)

DIMMA1

DDR3 (CHB)

DIMMB1

1600/1333/1066MHz

5GT/s

x4 DMI

Shared with mSATA

SATA-III (X10SLV-Q)

2 X USB 2.0 REAR

6Gb/s

480Mbps

USB2.0

2 X SATA-III

SATA-III

RJ45

2.5GT/s

PCIe2.0_x1 GLAN1

I217V

PCH

Intel

H81 / Q87

(Socket-H3)

2.7 Gb/s

x2 FDI

AZALIA

Realtek ALC888S-VD2

RJ45

2.5GT/s

PCIe2.0_x1 GLAN2

I210-AT

Mini PCI-E SLOT

PCIe2.0_x1

5GT/s

BLOCK DIAGRAM

RoHS 6/6

FLASH

SPI 128Mb

SPI

Display Port

HDMI

DVI-I

Digital port B

Digital port C

Digital port D

TPM1.2 Header

LPC

HWM

COM1/2 Rear

NCT6106D

LPC I/O

SODIMM

X10SLV / X10SLV-Q

PCIE[3]

PCIE[4]

PCIE[2]

SATA[0/1]

SATA[0]

SATA-II

3Gb/s

SATA[4/5]

Note: I-SATA0 Function disabled whe m-SATA inserted .

DDI B

DDI C

DDI D

RGB

USB[0/1]

USB[2/3]

2 X USB 2.0 Front

480Mbps

USB2.0

USB[4/5]

6Gb/s

COM 3/4/5 Header

1 X USB A-type

480Mbps

USB2.0

USB[10]

Note: COM5 support RS485/422

GPIO

Expander

USB[11]

3x audio jack

Express

2 X SATA-III

(X10SLV-Q)

2 X SATA-II

(X10SLV)

(X10SLV Only)

PCIe3.0_x16

8.0GT/s

(X10SLV-Q)

(X10SLV)

Page is loading ...

Supermicro X10SLV-Q User manual

Brand: Supermicro

Model: X10SLV-Q

Category: Motherboards

Type: User manual

Download PDF

report

Supermicro X10SLV-Q User manual

Supermicro X10SLV-Q User manual

Related papers

Other documents