Mettler Toledo Smart-Tag™ for Analytical Balances XSE Installation guide

Installation Instructions

Smart-Tag™

for Analytical Balances XPE, XSE

Choose a place for the Smart-Tag

• Selectaflatarea(ifonlyroundareasareavailable,chooseabiggerradius)

• Selectaplacewithoutmetalbehindthestickingarea

• Selectaplaceoutsidethegrippingarea

• Selectaplacethatiseasytoholdtothereader.

Sticking the Smart-Tag to the pipette

1.Cleanthestickingareawithamildsolvent(e.g.Isopropanol,Metanol).

2.Waituntiltheareaiscompletelydry.

3.PresstheSmart-Tagtothearea.

4.Leaveituntouchedforoneday.

Mettler-Toledo AG

Laboratory&WeighingTechnologies

CH-8606Greifensee,Switzerland

Subjecttotechnicalchanges

©Mettler-ToledoAG10/2013

30104632Aen

www.mt.com/excellence

Formoreinformation

*30104632*

Português

This manual is also suitable for

Download PDF