ADE M20610 Operating instructions

Type
Operating instructions
Operating Manual
Electronic Column Scale M20610
ADE GmbH & Co.
Hammer Steindamm 27 – 29
D – 22089 Hamburg
Germany
+49(40)432776-0
Fax +49(40)432776-10
1 050100-Rev001-M20610
Contents
Contents .................................................................................................................................................. 1
Components and Features...................................................................................................................... 2
Display symbols ..................................................................................................................... 2
Installation and use of scale .................................................................................................................... 3
Check carton contents ...........................................................................................................3
Assembling:............................................................................................................................ 3
Before weighing ..................................................................................................................... 3
Weighing.................................................................................................................................................. 4
To take the weight.................................................................................................................. 4
Change unit function .............................................................................................................. 4
Set zero .................................................................................................................................. 4
Tare function .......................................................................................................................... 5
Definition and use of BMI (Body Mass Index)........................................................................ 5
Evaluation of the Body Mass Index........................................................................................ 5
HOLD function........................................................................................................................ 6
Cleaning and Maintenance...................................................................................................................... 6
Cleaning ................................................................................................................................. 6
Safety Check.......................................................................................................................... 6
Warranty – Liability................................................................................................................. 6
CE marking and Declaration of Conformity ............................................................................................. 7
Declaration of CE Conformity................................................................................................. 7
Technical data ......................................................................................................................................... 7
050100-Rev001-M20610 2
Components and Features
Tare key
Key to turn scale ON, OFF and ZERO setting
Key to switch between weighing mode (kg or lb, oz) and key-in height for BMI
function
HOLD key and BMI (Body Mass Index) selecting key
Display symbols
ο
Weighing result is displayed most accurately
Î ο Í
Scale is under automatic zero setting
NET
Scale is indicating NET weight
HOLD
HOLD function is active
3 050100-Rev001-M20610
Installation and use of scale
Your ADE scale is a quality product. In order to achieve best possible results please follow strictly the
instructions of this Operating Manual:
Check carton contents
- Weighing platform incl. column connection
- Column
- Display incl. connecting cable
- Assembling material consisting of: Head plate with adhesive tape
- Column cover plate
- Screws
- Mains adapter
- Operating Manual
Assembling:
Remove all packing material and store same for use in case of warrantee claim.
- First pull the connecting cable being connected to the display through the head plate (Velcro
side up).
- Lead the cable down the column (head plate still loose)
- Place the column into the column connection
- Use the plug connection and fix the cable using the cable holder
- Mount column cover plate from underneath by using 3 of the screws and pull them tight.
- Now fasten the head plate with 3 screws on the upper part of the column.
- The display is finally connected to the head plate by using the Velcro.
Before weighing
Power supply of the scale: By mains adapter (12V 300 mA) and rechargeable batteries
- The display is already equipped with rechargeable batteries.
- To charge the power-pack for the first time please use the mains adapter.
- Complete first charging needs 24 hrs.
- Place the scale in its working area.
- Make sure to place the scale on an even ground.
- The scale is now ready for use.
Caution:
Please operate the scale only with the original ADE mains adapter that has been delivered.
- Always fit the adapter to the scale BEFORE connecting to an electrical outlet
- Disconnect from the electrical outlet BEFORE disconnecting the adapter from the scale.
050100-Rev001-M20610 4
- The mains adapter is not waterproof. Therefore make sure NOT to use the scale where water
can penetrate.
- In case the mains adapter became wet or show visible damages the scale can no longer be
operated by using this mains adapter. In this case please contact your local dealer or service
partner.
Weighing
To take the weight
- Press key ON to start the scale. `8888´will appear on the display which is an automatic
function test and zero setting. When `0.0´appears you are in the kg weighing mode. In addition
display will show the symbol `o´ to confirm stability of the zero setting.
- The scale may now be used.
- Step on the platform and stand still.
- After display is showing your weight and symbol `o´ appeared the most accurate result has
been reached.
- To turn off the scale press key OFF for minimum 3 seconds. This is essential if scale is used
on batteries. Using the scale on mains it may remain permanently switched on or can be shut
off manually by pressing key.
Change unit function
You may select the weight unit between kg and lb mode. Coming from the factory the scale is
switched to kg mode. To change into lb mode press UNIT/WEIGHT key.
Caution
- Please check weighing mode after switching to get proper result.
Set zero
You may set any displayed weighing result back to zero `0.0´by pressing the ZERO key. The
advantage is to weigh shoes or dress separately.
- Place objects on the scale.
- Press ZERO key.
- Unload the scale.
- The weight displayed before is showing a negative value and will be deducted automatically
during the next weighing procedure.
- The negative value will not be stored.
5 050100-Rev001-M20610
Tare function
The tare function (also known as mother & child function) allows to store a fixed weight that will be
deducted each weighing procedure unless deleted or replaced by another.
- Take weight as described before and store the result by pressing the TARE key.
- The scale is now in NET weighing mode which is also indicated on the display.
- If for example you stored the weight of the mother or nurse, she can step now on the scale
with the baby in her arms.
- The weight displayed is the weight of the baby.
- The scale identified the added weight. You may now use the scale for as many weighing
procedures and the stored value will always be deducted.
Definition and use of BMI (Body Mass Index)
The Body Mass Index is the ratio between height and weight squared. The BMI is meanwhile
accepted world wide – also by WHO (World Health Organization) - helping to evaluate the state of
nutrition and with that also the state of health of a person. The result is a tolerance value.
- Press the ON/ZERO/OFF key to start the scale and wait until the display shows 0.0.
- Step on the scale and take your weight.
- Press the HOLD/BMI key for at least 3 seconds.
- By doing that you selected the storage mode for your own height in cm. You will also find the
word `HIGH´ on the display.
- Once entered the mode you find a given value that you will probably have to change.
- The first digit (normally a 1) is blinking. Change indication if necessary by pressing the
UNIT/WEIGHT key by using the numeric key stored (0-9).
- Press the HOLD/BMI key again and you will get to the next digit.
- Repeat the procedure until your exact height is shown on the display.
- Press TARE key for confirmation and you will get back into the normal weighing mode.
- Press again HOLD/BMI key shortly like you do when activating the HOLD function. The arrow
will appear in the display for a short moment and disappear when the display is showing you
instead your weight and alternating your BMI.
- To deactivate the BMI mode press again HOLD/BMI key.
Evaluation of the Body Mass Index
BMI below 18
The patient is not showing enough weight. Control nutrition to put on weight.
BMI between 18 and 20
The patient is slightly under weighed. If he feels well there is no need for a change.
BMI between 20 and 25
The patient is in the range of normal weight.
BMI between 25 and 30
The patient is slightly overweighed. A reduction of weight is indicated or, is necessary if the
state of health is already affected (e.g. diabetes, high end blood pressure, heart diseases).
BMI over 30
Reduction of weight is imperative. Also to visit a doctor is highly recommended.
050100-Rev001-M20610 6
HOLD function
By using the HOLD function the identified weight might be stored and is shown on the display even if
you stepped already off the scale. The advantage is to take care of the patient first and then take note
of the weight.
- Press HOLD/BMI key while scale is under load.
- The display shows a blinking arrow symbol next to the HOLD symbol.
- Once the scale is loaded with more than 3 kg the blinking stops.
- The weight displayed will now also show after unloading of the platform.
- To deactivate the Hold function press again HOLD/BMI key.
Cleaning and Maintenance
Cleaning
Before cleaning make sure the scale has been disconnected from the socket.
For cleaning just use a damp cloth or common disinfection fluids.
Do not use any aggressive cleaning fluids.
Make sure no water or cleaning fluids is penetrating the scale.
Your ADE scale is equipped with a mains adapter and rechargeable batteries.
If the display shows the symbol `Low´ the power pack needs to be recharged by using the adapter.
Safety Check
Do NOT use the scale
If the mains adapter shows visible damages.
if the mains adapter is not working properly any more
After long storage in humid places
Please contact your dealer or service partner in those cases.
Storage and Transport
Please keep all original parts and pieces for an eventual sending back of the scale
in order to avoid any possible damage during transport which automatically leads to non warranty.
Disconnect all cables before transport and avoid unnecessary damages.
Warranty – Liability
ADE will repair or replace this product within a period of 2 years from date of delivery applying to
defects occurred due to poor material or workmanship (presentation of invoice is necessary). All
moveable parts – batteries, cables, mains units, rechargeable batteries etc. – are excluded. Warranty
does not include natural wear, damages caused by incorrect or negligent handling, overuse or
unsuitable or improper storage. The cost of transport will be borne by the customer should the
equipment be located anywhere other then the customer’s premises. In the event of transport
damage, claims under warranty can be accepted subject to using the complete original packaging and
the equipment secured the way it was packed and secured originally. All the packaging should
therefore be retained.
7 050100-Rev001-M20610
Any warranty claim will be rejected if the equipment is opened by persons not authorized expressively
by ADE to do so.
Customers abroad are kindly requested to contact their local dealer for any warranty claim, customer
service and spare parts.
CE marking and Declaration of Conformity
ADE products are manufactured as per the standards applicable of the actual European norms and
directives to produce and offer world-wide products at the latest technical standard and with a long
lifetime.
Declaration of CE Conformity
This product corresponds to the valid EC Directive 89/336/EEC for electromagnetic compatibility.
Products carrying this sign correspond to the standards of
Directive 73/23 EEC(for low voltage)
Technical data
Max. Capacity: 200 kg / 440 lbs
Graduation: 100 g / 0,2 lb
Weighing range: 1 kg – 200 kg / 2 lbs – 440 lbs
Display: easy to read 25 mm LCD Display
Dimensions: 310 x 960 x 430 mm
Power supply: Mains and rechargeable batteries
Zero setting: Automatic
Working temperature: 5 to +35 degrees Celsius
Total Weight: approx. 6 kg
Supplier:
ADE GmbH & Co.
Hammer Steindamm 27 – 29
D – 22089 Hamburg
Germany
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

ADE M20610 Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI