ADE M10612 Operating instructions

Brand: ADE

Model: M10612

Category: Personal scales

Type: Operating instructions

Operating Manual

Electronic Babyscale M10612

ADE GmbH & Co.

Hammer Steindamm 27 – 29

D – 22089 Hamburg

 +49(40)432776-0

Fax +49(40)432776-10

E-mail: [email protected]

1 050100-Rev000-M10612

Components and Features

1 Zero – (0) Tare function

2 Hold – Hold function

3 KG/LB – Change Unit

4 On/Off – self explanatory

Installation and use of scale

Insert Battery:

Open the battery compartment situated underneath the base of the scale and insert 1 unit 9 V mono

bloc alkaline battery. Close the compartment properly and make sure that it is safely secured.

Dispose off used batteries as special waste and do not mix with household waste.

Only use the scale after positioning on a firm and even ground.

For new born babies use the delivered baby tray for weighing.

Fixing the baby tray:

1. Remove the rubber plugs from the scale platform and store them out of reach of children.

2. Place the baby tray onto the scale platform ensuring that the tray feet insert into the holes on the

platform left behind by removing the rubber plugs. Place the locking key into the hole in the centre

of the weighing tray for security.

3. Using a coin twist the locking key 90° anti clockwise to activate the locking key.

4. Ensure that the tray is properly secured. You should not be able to remove the tray from the scale

platform.

5. Once the tray is secured the scale is ready to weigh.

050100-Rev000-M10612 2

Remove the baby tray:

1. Using a coin turn the locking key 90° clockwise the locking key is deactived. This will release the

tray so that it can be removed from the scale platform.

2. Remove the tray and store the locking key out of reach of children.

3. After removing the baby tray place the rubber plugs provided in the holes left behind on the

platform surface.

4. Once the rubber plugs are in place the scale is suitable and ready to weigh toddlers.

NOTE:

DO NOT lift the scale by the tray. Always support under the scale base.

Weighing

1. If required, place a cover (e.g. paper or cloth) on the tray BEFORE switching on. By doing this

your scale will find the zero point including the weight of the cover.

2. Press ON/OFF button, `8888´will appear in the display followed by `0.00´(0.0).

3. Place the baby on the tray or induce the toddler to step on the scale.

4. The scale will automatically display the weight.

To select weight mode

To switch between weight modes lbs./oz, kg/g simply press the KG/LB button.

Hold function

Once a weighing result is displayed press the HOLD button and make the toddler stand off the scale

(or remove the baby from the tray) and the weight result will be held on the display for 30 seconds.

Zero (0) Tare function

If you wish to weigh your baby in its dry nappy/vest without influencing the weight result:

1. Switch on the scale and wait for 0.00 (0.0).

2. Place the nappy or vest on the tray.

3. Activate the ZERO button and the scale will go back to 0.00 (0.0).

4. Remove the nappy/vest and the display will show a negative indication.

5. Place the baby (in its nappy/vest) on the scale.

6. The weight displayed is baby’s weight only.

Warning indicators:

- If display shows `Err´ then too much weight has been placed on the scale. (max. capacity 20 kg)

- If display shows `Lo´ then the batteries are flat and need replacement.

3 050100-Rev000-M10612

Cleaning and Maintenance

Safety

- Your ADE scale is a precision instrument which has to be handled with care. Do not drop or jump

on.

- Use the scale only on an even and safe ground or, if used for toddlers on the floor in order to avoid

accidents.

- Supervision by adults is always required.

- If not in use, store the scale out of reach of children.

- This product is not a toy and should also not be treated like that.

Cleaning advice

- For cleaning just use a damp cloth or common disinfection products. Do NOT use any aggressive

cleaning fluids.

- Take care no water is penetrating the scale. This might cause severe damage to the electronic part

and would set the scale out of order.

Warranty – Liability

ADE will repair or replace this product within a period of 2 years from date of delivery applying to

defects occurred due to poor material or workmanship (presentation of invoice is necessary). All

moveable parts – batteries, cables, mains units, rechargeable batteries etc. – are excluded. Warranty

does not include natural wear, damages caused by incorrect or negligent handling, overuse or

unsuitable or improper storage. The cost of transport will be borne by the customer should the

equipment be located anywhere other then the customer’s premises. In the event of transport

damage, claims under warranty can be accepted subject to using the complete original packaging and

the equipment secured the way it was packed and secured originally. All the packaging should

therefore be retained.

Any warranty claim will be rejected if the equipment is opened by persons not authorized expressively

by ADE to do so.

Customers abroad are kindly requested to contact their local dealer for any warranty claim, customer

service and spare parts.

CE Declaration of Conformity

It is hereby certified that this product meets the basic safety requirements laid down in the

Directive of the Council applicable to the harmonisation of the legal provisions of the member

states with regards to the electromagnetic compatibility (89/336/EEC).

050100-Rev000-M10612 4

Technical date

• Removable baby try

• Baby tray: 550 x 145 x 300 mm

• Large LCD display, 31 mm

• Capacity: 20 kg

• Graduation: 10 g

• Weight unit: kg/lbs

• Hold- und Tare function

• Battery operated (9V mono bloc alkaline)

• Weight: abt. 4,2 kg

Supplier:

ADE GmbH & Co.

Hammer Steindamm 27 – 29

D – 22089 Hamburg

Germany

ADE M10612 Operating instructions

Brand: ADE

Model: M10612

Category: Personal scales

Type: Operating instructions

Download PDF

report

ADE M10612 Operating instructions

ADE M10612 Operating instructions

Related papers

Other documents