Supermicro H8DGG-QF User manual

Brand: Supermicro

Model: H8DGG-QF

Category: Server/workstation motherboards

Type: User manual

USER’S MANUAL

Revision 1.2

SUPER

H8DGG-QF

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

and makes no commitment to update or to keep current the information in this manual, or to notify

any person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at

www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL Super Micro Computer, Inc. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,

INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE

OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC. SHALL

NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall be

the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims

will not exceed the price paid for the hardware product.

FCC Statement: Refer to Supermicro's web site for FCC Compliance Information.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See

www.dtsc.ca.gov/hazardouswaste/perchlorate”.

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.2

Release Date: September 09, 2013

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

iii

Preface

About This Manual

This manual is written for system integrators, PC technicians and

knowledgeable PC users. It provides information for the installation and use of the

H8DGG-QF serverboard.

The H8DGG-QF serverboard is based on the AMD® SR5690/SP5100 chipsets

and supports two AMD Socket G34 type processors with up to 512 GB of DDR3

Registered ECC DDR3-1600/1333/1066 Mhz SDRAM or 128 GB of DDR3

Unbuffered ECC/non-ECC SDRAM in sixteen (16) DIMMs.

Please refer to the motherboard speciﬁ cations pages on our web site for updates on

supported processors (http://www.supermicro.com/aplus/). This product is intended

to be professionally installed.

Manual Organization

Chapter 1 includes a checklist of what should be included in your motherboard

box, describes the features, speciﬁ cations and performance of the motherboard

and provides detailed information about the chipset.

Chapter 2 begins with instructions on handling static-sensitive devices. Read this

chapter when installing the processor(s) and memory modules and when installing

the motherboard in a chassis. Also refer to this chapter to connect the hard disk

drives, the various ports, and the power and reset buttons and the system LEDs.

If you encounter any problems, see Chapter 3, which describes troubleshooting

procedures for the video, the memory and the setup conﬁ guration stored in CMOS.

For quick reference, a general FAQ (Frequently Asked Questions) section is

provided. Instructions are also included for contacting technical support. In addition,

you can visit our web site for more detailed information.

Chapter 4 includes an introduction to BIOS and provides detailed information on

running the CMOS Setup utility.

Appendix A provides BIOS Error Beep Code Messages.

Appendix B lists BIOS POST Checkpoint Codes.

H8DGG-QF SERVERBOARD USER'S MANUAL

Notes

Standardized Warning Statements

About Standardized Warning Statements

The following statements are industry standard warnings, provided to warn the user

of situations which have the potential for bodily injury. Should you have questions

or experience difﬁ culty, Contact Supermicro's Technical Support department

for assistance. Only certiﬁ ed technicians should attempt to install or conﬁ gure

components.

Read this appendix in its entirety before installing or conﬁ guring components in the

Supermicro chassis.

These warnings may also be found on our web site at http://www.supermicro.

com/about/policies/safety_information.cfm.

Battery Handling

Warning!

There is a danger of explosion if the battery is replaced incorrectly. Replace the

battery only with the same or equivalent type recommended by the manufacturer.

Dispose of used batteries according to the manufacturer's instructions

警告

电池更换不当会有爆炸危险。请只使用同类电池或制造商推荐的功能相当的电池更

换原有电池。请按制造商的说明处理废旧电池。

警告

電池更換不當會有爆炸危險。請使用製造商建議之相同或功能相當的電池更換原有

電池。請按照製造商的說明指示處理廢棄舊電池。

Warnung

Bei Einsetzen einer falschen Batterie besteht Explosionsgefahr. Ersetzen Sie die

Batterie nur durch den gleichen oder vom Hersteller empfohlenen Batterietyp.

Entsorgen Sie die benutzten Batterien nach den Anweisungen des Herstellers.

H8DGG-QF SERVERBOARD USER'S MANUAL

Attention

Danger d'explosion si la pile n'est pas remplacée correctement. Ne la remplacer

que par une pile de type semblable ou équivalent, recommandée par le fabricant.

Jeter les piles usagées conformément aux instructions du fabricant.

!הרהזא

תנכס תמייקץוציפ .הניקת אל ךרדב הפלחוהו הדימב הללוסה לש ףילחהל שי

גוסב הללוסה תא מ םאותה תרבחלמומ ןרציתצ.

תוללוסה קוליס תושמושמה עצבל שי .ןרציה תוארוה יפל

ﺮﻄﺧ ﻙﺎﻨﻫ ﻦﻣ ﻝﺍﺪﺒﺘﺳﺍ ﺔﻟﺎﺣ ﻲﻓ ﺭﺎﺠﻔﻧﺍ ﺔﻳﺭﺎﻄﺒﻟﺍ ﺔﺤﻴﺤﺻ ﺮﻴﻏ ﺔﻘﻳﺮﻄﺑ ﻚﻴﻠﻌﻓ

ﺔﻳﺭﺎﻄﺒﻟﺍ ﻝﺍﺪﺒﺘﺳﺍ

ﻂﻘﻓ ﻉﻮﻨﻟﺍ ﺲﻔﻨﺑ ﺎﻬﻟﺩﺎﻌﻳ ﺎﻣ ﻭﺃ ﺎﻤﻛﺖﺻﻭﺃ ﺔﻌﻨﺼﻤﻟﺍ ﺔﻛﺮﺸﻟﺍ ﻪﺑ

ﺕﺎﻳﺭﺎﻄﺒﻟﺍ ﻦﻣ ﺺﻠﺨﺗ ﻟ ﺎﻘﻓﻭ ﺔﻠﻤﻌﺘﺴﻤﻟﺍﺔﻌﻧﺎﺼﻟﺍ ﺔﻛﺮﺸﻟﺍ ﺕﺎﻤﻴﻠﻌﺘ

Waarschuwing

Er is ontplofﬁ ngsgevaar indien de batterij verkeerd vervangen wordt. Vervang de

batterij slechts met hetzelfde of een equivalent type die door de fabrikant aanbevolen

wordt. Gebruikte batterijen dienen overeenkomstig fabrieksvoorschriften afgevoerd

te worden.

¡Advertencia!

Existe peligro de explosión si la batería se reemplaza de manera incorrecta.

Reemplazar la batería exclusivamente con el mismo tipo o el equivalente

recomendado por el fabricante. Desechar las baterías gastadas según las

instrucciones del fabricante.

Standardized Warning Statements

vii

Product Disposal

Warning!

Ultimate disposal of this product should be handled according to all national laws

and regulations.

警告

本产品的废弃处理应根据所有国家的法律和规章进行。

警告

本產品的廢棄處理應根據所有國家的法律和規章進行。

Warnung

Die Entsorgung dieses Produkts sollte gemäß allen Bestimmungen und Gesetzen

des Landes erfolgen.

¡Advertencia!

Al deshacerse por completo de este producto debe seguir todas las leyes y

reglamentos nacionales.

Attention

La mise au rebut ou le recyclage de ce produit sont généralement soumis à des

lois et/ou directives de respect de l'environnement. Renseignez-vous auprès de

l'organisme compétent.

רצומה קוליס

!הרהזא

ו תויחנהל םאתהב תויהל בייח הז רצומ לש יפוס קוליס.הנידמה יקוח

Waarschuwing

De uiteindelijke verwijdering van dit product dient te geschieden in overeenstemming

met alle nationale wetten en reglementen.

ﻲﺋﺎﻬﻨﻟﺍ ﺺﻠﺨﺘﻟﺍ ﻦﻣ ﺞﺘﻨﻤﻟﺍ ﺍﺬﻫ ﻪﻌﻣ ﻞﻣﺎﻌﺘﻟﺍ ﻲﻐﺒﻨﻳ ﻟ ﺎﻘﻓﻭ ﻊﻴﻤﺠﺔﻴﻨﻁﻮﻟﺍ ﺢﺋﺍﻮﻠﻟﺍﻭ ﻦﻴﻧﺍﻮﻘﻟﺍ ﺪﻨﻋ

H8DGG-QF SERVERBOARD USER'S MANUAL

viii

Notes

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

Checklist ..........................................................................................................1-1

1-2 Contacting Supermicro .................................................................................... 1-2

H8DGG-QF Quick Reference .........................................................................1-5

1-3 Motherboard Features ..................................................................................... 1-6

1-4 Chipset Overview ............................................................................................1-9

AMD SR5690/SP5100 Chipsets .....................................................................1-9

HyperTransport Technology ............................................................................1-9

1-5 PC Health Monitoring ......................................................................................1-9

1-6 Power Conﬁ guration Settings........................................................................1-10

1-7 Power Supply .................................................................................................1-11

1-8 Super I/O ........................................................................................................1-11

Chapter 2 Installation

2-1 Static-Sensitive Devices .................................................................................. 2-1

Precautions ..................................................................................................... 2-1

Unpacking ....................................................................................................... 2-1

2-2 Processor and Heatsink Installation................................................................2-2

2-3 Mounting the Motherboard into a Chassis ......................................................2-4

2-4 Installing Memory ............................................................................................2-4

DIMM Module Population Conﬁ guration ....................................................2-6

2-5 PCI Expansion Cards ...................................................................................... 2-7

2-6 I/O Port and Control Panel Connections ........................................................2-8

Front Control Panel .........................................................................................2-8

2-7 Connector Deﬁ nitions ..................................................................................... 2-9

Power Connectors ..................................................................................... 2-9

Power Connector ........................................................................................2-9

Reset Connector ...................................................................................... 2-10

Power Fail LED ........................................................................................2-10

Overheat (OH)/Fan Fail/PWR Fail/UID LED ............................................2-10

NIC2 (Link/Activity) LED ........................................................................... 2-10

NIC1 (Link/Activity) LED ........................................................................... 2-10

HDD LED ...................................................................................................2-11

Power LED Connector ..............................................................................2-11

NMI Button ................................................................................................2-11

Universal Serial Bus Ports ........................................................................2-11

Table of Contents

USB Headers ............................................................................................2-11

SGPIO ......................................................................................................2-12

Fan Headers .............................................................................................2-12

Power SMB (I

C) ......................................................................................2-12

Chassis Intrusion .....................................................................................2-12

LAN1/2 (Ethernet Ports) ...........................................................................2-13

IPMB .........................................................................................................2-13

Overheat LED ...........................................................................................2-13

Video Connector .......................................................................................2-13

Unit Identiﬁ er Button ................................................................................. 2-14

Serial Port .................................................................................................2-14

Trusted Platform Module Header .............................................................2-14

2-8 Jumper Settings ............................................................................................2-15

Explanation of Jumpers ................................................................................ 2-15

CMOS Clear .............................................................................................2-15

BMC Jumper ............................................................................................ 2-16

Watch Dog Enable/Disable ......................................................................2-16

LAN1/2 Enable/Disable ........................................................................... 2-16

VGA Enable/Disable ................................................................................. 2-16

2-9 Onboard Indicators ........................................................................................ 2-17

GLAN LEDs ..............................................................................................2-17

IPMI Dedicated LAN LEDs ....................................................................... 2-17

UID LED (LE1) ........................................................................................2-17

Power LED ...............................................................................................2-18

2-10 SATA Drive Connections ............................................................................... 2-18

SATA Ports ...............................................................................................2-18

2-11 Enabling SATA RAID ..................................................................................... 2-19

Serial ATA (SATA)..........................................................................................2-19

Installing the OS/SATA Driver ....................................................................... 2-19

Building a Driver Diskette ......................................................................... 2-19

Enabling SATA RAID in the BIOS ................................................................. 2-20

Using the Adaptec RAID Utility .....................................................................2-21

Installing the RAID Driver During OS Installation .........................................2-21

2-12 Installing Drivers ............................................................................................2-22

Supero Doctor III ...........................................................................................2-23

2-13 Serverboard Battery ...................................................................................... 2-25

H8DGG-QF SERVERBOARD USER'S MANUAL

Table of Contents

Chapter 3 Troubleshooting

3-1 Troubleshooting Procedures ........................................................................... 3-1

Before Power On ............................................................................................ 3-1

No Power ........................................................................................................3-1

No Video .........................................................................................................3-2

Memory Errors ............................................................................................... 3-2

Losing the System’s Setup Conﬁ guration ....................................................... 3-2

3-2 Technical Support Procedures ........................................................................ 3-2

3-3 Frequently Asked Questions ........................................................................... 3-3

3-4 Returning Merchandise for Service.................................................................3-4

Chapter 4 BIOS

4-1 Introduction ......................................................................................................4-1

4-2 Main Menu ...................................................................................................... 4-2

4-3 Advanced Settings Menu ................................................................................ 4-2

4-4 Security Menu ...............................................................................................4-20

4-5 Boot Settings Menu ....................................................................................... 4-21

4-6 Exit Menu ......................................................................................................4-22

Appendix A BIOS Error Beep Codes

Appendix B BIOS POST Checkpoint Codes

B-1 Uncompressed Initialization Codes .................................................................B-1

B-2 Bootblock Recovery Codes .............................................................................B-2

B-3 Uncompressed Initialization Codes .................................................................B-3

Notes

H8DGG-QF SERVERBOARD USER'S MANUAL

xii

Chapter 1: Introduction

1-1

Chapter 1

Introduction

1-1 Overview

Checklist

Congratulations on purchasing your computer motherboard from an acknowledged

leader in the industry. Supermicro boards are designed with the utmost attention to

detail to provide you with the highest standards in quality and performance.

Please check that the following items have all been included with your motherboard.

If anything listed here is damaged or missing, contact your retailer.

• One (1) H8DGG-QF serverboard

Note: For your system to work properly, please follow the links below to download

all necessary drivers/utilities and the user’s manual for your server.

• Supermicro product manuals: http://www.supermicro.com/support/manuals/

• Product drivers and utilities: ftp://ftp.supermicro.com

• Product safety information:

http://super-dev/about/policies/safety_information.cfm

• If you have any questions, please contact our support team at:

[email protected]

1-2

H8DGG-QF SERVERBOARD USER'S MANUAL

1-2 Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Web Site:

www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Asia-Paciﬁ c

Address: Super Micro Computer, Inc.

3F, No. 150, Jian 1st Rd.

Zhonghe Dist., New Taipei City 23511

Taiwan (R.O.C)

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3992

Web Site:

www.supermicro.com.tw

Technical Support:

Email: [email protected]

Tel: +886-(2)-8226-3990

Chapter 1: Introduction

1-3

Figure 1-1. H8DGG-QF Image

1-4

H8DGG-QF SERVERBOARD USER'S MANUAL

Notes:

Jumpers not indicated are for test purposes only.

Not all ports, jumpers or LED Indicators are available on all serverboards.

Figure 1-2. H8DGG-QF Motherboard Layout

(not drawn to scale)

BATTERY

JIPMB2

JPI2C1

JPI2C2

SLOT SBX-2A

FAN6

FAN5

FAN8

FAN7

FAN4

FAN3

FAN2

FAN1

LE1

JPW2

JPW4

JF1

JBT1

JWD1

JPL1

JPG1

JBMC1

DP2

JSPK1

JL1

JOH1

SATA2 SATA3 SATA4 SATA5SATA0 SATA1

JPW1

JPW3

USB0/1

IPMI_LAN

SLOT2 PCI-E 2.0 X8 (in X16)

P1-DIMM1A

CPU2

P1-DIMM1B

P1-DIMM2A

LAN1

P1-DIMM2B

P1-DIMM3A

P1-DIMM3B

COM1

P1-DIMM4A

P1-DIMM4B

P2-DIMM4B

P2-DIMM4A

P2-DIMM3B

P2-DIMM3A

VGA

UID

SLOT5 PCI-E 2.0 X8 (in X16)

SLOT4 PCI-E 2.0 X16

P2-DIMM2A

P2-DIMM2B

P2-DIMM1A

P2-DIMM1B

USB2/3

T-SGPIO1

T-SGPIO2

CPU1

LAN2

BMC

NIC

AMD

SP5100

AMD

SR5690

AMD

SR5690

SLOT SBX-1A

SLOT1 PCI-E 2.0 X16

JTPM1

SLOT3 PCI-E 2.0 X16

Chapter 1: Introduction

1-5

H8DGG-QF Quick Reference

Jumper Description Default Setting

JBT1 CMOS Clear (See Section 2-7)

JBMC1 BMC Enable/Disable Pins 1-2 (Enabled)

JPG1 VGA Enable/Disable Pins 1-2 (Enabled)

JPL1 LAN 1/2 Enable/Disable Pins 1-2 (Enabled)

JWD1 Watch Dog Pins 1-2 (Reset)

LED Description

LAN Ports LEDs for the LAN Ethernet ports

Dedicated IPMI LAN LEDs for the dedicated IPMI LAN Ethernet port

LE1 LED for UID Button

DP2 LED for Serverboard Power-On

Connector Description

COM1 COM1 Serial Port

FAN 1-8 Chassis/GPU Fan Headers

IPMI LAN Dedicated IPMI LAN Port

JF1 Front Panel Connector

JIPMB2 System Management Bus Header for the IPMI Slot

JL1 Chassis Intrusion Header

JOH1 Overheat Warning Header

JPI2C1/JPI2C2 Power I

C Headers

JPW1/3 20-pin Main ATX Power Connectors

JPW2/4 +12V 8-pin CPU Power Connectors

JSPK1 Speaker Header

JTPM1 Trusted Platform Module Header

LAN1/2 Gigabit Ethernet (RJ45) Ports

SATA0 ~ SATA5 SATA Ports

T-SGPIO-1/TSGPIO-2 Serial General Purpose Input/Output Header for SATA

UID Unit Identiﬁ er Button

USB0/1 and USB2/3 Universal Serial Bus (USB) Ports and Headers

VGA VGA Connector

1-6

H8DGG-QF SERVERBOARD USER'S MANUAL

1-3 Motherboard Features

CPU

• Dual AMD Opteron 6000 series (AMD Socket G34 type) processors

Note: You must install at least two processors for full functions to be supported.

Memory

• The H8DGG-QF serverboard contains (sixteen (16)) single/dual/tri/quad

channel DIMM slots supporting up to 512 GB of Registered ECC or

128 GB of Unbuffered ECC/non-ECC DDR3-1600/1333/1066 Mhz speed,

1 GB, 2 GB, 4 GB, 8 GB, 16 GB or 32 GB size SDRAM memory.

Note: Refer to Section 2-4 before installing memory and our web site for recommended DIMMs.

Chipset

• Dual SR5690 chipsets and one SP5100 Southbridge chipset

Expansion Slots

• Three (3) PCI-Express x16 Gen. 2

• Two (2) PCI-Express x8 (in x16 slot) Gen. 2

Note: Slot SBX-1A with slot 1 and slot SBX-2A with slot 2 require a SuperMicro

riser card or add-on card to work properly. The riser cards need both the SBX and

PCI-E slots on each side of the serverboard to be connected.

BIOS

• 16 Mb AMI BIOS® SPI Flash ROM

• AMI 1.2, DMI 2.3, PCI 2.2, ACPI 1.0 (ACPI 2.0 is BIOS supported), SMBIOS

2.3, Real Time Clock Wakeup, Plug and Play (PnP), BIOS resume hot keys

PC Health Monitoring

• Onboard voltage monitors

• Fan status monitor with ﬁ rmware/software on/off and speed control

• Watch Dog/NMI

• Environmental temperature monitoring via BIOS

• Power-up mode control for recovery from AC power loss

• System resource alert (via included utility program)

• Auto-switching voltage regulator for the CPU core

Chapter 1: Introduction

1-7

• CPU thermal trip support

• I

C temperature sensing logic

ACPI Features

• Microsoft OnNow

• Slow blinking LED for suspend state indicator

• BIOS support for USB keyboard

• Hardware BIOS Virus protection

• Wake-On-LAN (WOL)

• Internal/external modem ring-on

Onboard I/O

• Six (6) SATA ports supported by an on-chip SATA controller (RAID 0, 1 and 10

supported)

• One (1) Fast UART 16550 compatible serial port

• Four (4) USB (Universal Serial Bus 2.0) ports (2x rear, 2x header)

• Two (2) LAN ports supported by an onboard Intel® 82576 dual port Ethernet

controller for 10/100/1000Base-T

• One (1) dedicated IPMI LAN port

• One (1) VGA port supported by an onboard Matrox

G200 graphics controller

(with 16 MB DDR2 memory)

Other

• Onboard power LED

• Suspend State indicator LED

• UID/Remote UID

• Chassis intrusion detection

• Chipkill support

CD Utilities

• BIOS ﬂ ash upgrade utility

• Super Doctor III

• IPMI 1.5 / 2.0 (Optional)

Dimensions

• Propriatory format: (LxW) 7.74" x 16.64" (197 x 423 mm)

1-8

H8DGG-QF SERVERBOARD USER'S MANUAL

AMD

Socket G34

CPU2

HT3 Link

16x16-5.2GT/s

PCI-E GEN2 X16

Slot3

SATA x6

PCI-E GEN2 X16

Slot1

A-Link

SP5100

BMC

VGA

WPCM450-R

PCI

LPC

USB

SIO

W83527

HWM

W83795G

SPI Flash

RMII

DDR2 SDRAM

64Mb X16bit

PSU I2C

IPMB

FE PHY

RTL8201N

VGA

Clock Gen

TPM (/OPT)

SR5690-S

COM

PCI-E GEN2 X4

INTEL

KAWELA

RJ45

SR5690-M

Slot5

Slot2

Slot4

PCI-E GEN2 X8

PCI-E GEN2 X16

HT3 Link

16x16-5.2GT/s

HT3 Link

8x8-6.4GT/s

AMD

Socket G34

CPU1

DIMM A1

DIMM A0

DIMM B0

DIMM B1

DIMM C0

DIMM C1

DIMM D0

DIMM D1

DIMM A0

DIMM A1

DIMM B0

DIMM B1

DIMM C0

DIMM C1

DIMM D0

DIMM D1

4xUSB

RJ45

HT3 Link

8x8-6.4GT/s

HT3 Link

(8+8)x(8+8)-6.4GT/s

Figure 1-3. AMD SR5690/SP5100 Chipset:

System Block Diagram

Note: This is a general block diagram and may not exactly represent

the features on your motherboard. See the previous pages for the

actual speciﬁ cations of your motherboard.

Page is loading ...

Supermicro H8DGG-QF User manual

Brand: Supermicro

Model: H8DGG-QF

Category: Server/workstation motherboards

Type: User manual

Download PDF

report

Supermicro H8DGG-QF User manual

Supermicro H8DGG-QF User manual

Related papers

Other documents