Sanyo MCD-Z250F User manual

Sanyo
Brand
Sanyo
Model
MCD-Z250F
Category
CD players
Type
User manual

Sanyo MCD-Z250F is an audio system with a CD player, cassette player, and radio. The CD player can play both audio CDs and CD-Rs, and it has a number of features to enhance your listening experience, including a programmable track order, repeat play, and random play. The cassette player can record and playback cassettes, and it has a number of features to make recording and playback easier, such as auto-reverse and Dolby noise reduction. The radio has a built-in antenna and can receive both AM and FM stations.

Sanyo MCD-Z250F is an audio system with a CD player, cassette player, and radio. The CD player can play both audio CDs and CD-Rs, and it has a number of features to enhance your listening experience, including a programmable track order, repeat play, and random play. The cassette player can record and playback cassettes, and it has a number of features to make recording and playback easier, such as auto-reverse and Dolby noise reduction. The radio has a built-in antenna and can receive both AM and FM stations.

h
Service Manual
.. .
CD Radio Cassette
Recorder
FILE NO.
MCD-Z250F (AU)
Specifications
(Cassette Section)
Recording system ........................AC bias, 4 track stereo
Erasing system ............................. Magnet erase
Tape speed ..................................4.75 cm/ sec.
Fast forward and rewind time
.......110 sec. (C-60 tape)
Frequency response
....................80 -12,000 Hz (Normal tape)
(CD Section)
Channels ......................................2 channels
Wow & Flutter ...............................Undetedable
Sampling frequency .....................44.1 kHz
Quantization .................................16 btis linear/ch
Pick up light source
......................Semiconductor laser
Pick up wave length .....................790 nm
(Radio Section)
Tuning ranges ..............................FM :88-108 MHz
AM :525-1,710 kHz
Antennas ...................................... Built-in ferrite bar and
telescoping rod antennas
PRODUCT CODE
No.
14266011
(General)
Output power
..............2.5 W/ch (DC max.)
65 W (P.M. P.O.)
Speaker .......................l Ocm x 2, 8 ohms
Terminal impedance
PHONES
.................32 ohms
Power source
..............AC :230-240 V, 50
Hz
DC :12 V (8 “C” size batteries)
Tuner memory back-up batteries :
DC 6 V, 4 “AA’ size batteries
Remote control unit :
DC 3 V, 2 “AA” size batteries
Dimensions ....
.............412 x 158x 239 mm (W x H x D)
Weight (approx.)
..........2.8 kg (without batteries)
Specifications subject to change without notice.
REFERENCE
No. SM580827
LASER BEAM SAFETY’ PRECAUTIONS
● Pick-up that emits a laser beam is used in this CD player.
CAUTION :
USE OF CONTROLS ~ ADJUSTMENTS
OR PERFORMANCE G PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE
LASER OUTPUT
..........0.6mW Max. (CW)
WAVELENGTH
.............790 ml-l
L
CAUTION- INVISIBLE LASERRADIATIONWHEN OPEN AND
INTERLOCKSDEFEATED,AVOIDEXPOSURETO BEAM.
AOVARSEL- USWLIG IASER STRALINGVED ~BNING. NAR
I s~ERHEDSA.FfH’DERE ER UDEAF FiJNiiOi. UNDGikS .ETTFLSE I
.—.
FOR STRhNG.
VAJINING- OSYNUG LASERSTRALNINGNAR DENNADELAR OPPNAD
CK2+SPARRAR URKOPPIAD. STRALENAR FARUG.
WX?SICHT- UNSIU-WBARELASERSTRAHLUNGTRITT AUS. WENN
~
A
I D=KELGE&FN~UNDViENN ScHERHEIT.SVERRIEGiLiNC i””’ I
@ERBROCKT lsT. NK2HT,DEMSTRAHLAlk33~EN.
VAi10 - AVA17AESSA JASUOJALUKITUSOHITE’ITAESSA OLET ALTWNA
NAKYMA’IT6MALE LASERSATEILYLLE.Ati K4TS0 SATEESEEN.
REMOVAL AND INSTALLATION
● Disconnect the power cord’s plug from the electrical outlet.
● All wiring should be returned to the original position after work is completed-
● First have ready many the new FIXERS (614 129 4971) for replacement.
● Arrange the lead wires so that they are not near the heat sink.
a. CABINET
~
b. TOP PANEL
c. CASSiEITE LID
liSH
—
i
REMOVAL AND INSTALLATION
d. CD MECHANISM
e. CD P.W.BOARD
A
@
f. OPEN/ CLOSE P.W.EiOARD
1
h. MAIN P.W. BOARD B1.OCK
g. DISPLAY P. W. BOARD
-2-
REMOVAL AND INSTALLATION
i.
TUNER P.W. BOARD
L
WIRING
. FRONT
. TAPE MECHANISM
TOCN102
LEAD, FIX
\
& 1
u
,-
1!
\
\
\
+’
—
SPEAKER -
GMECHA &MOTOR
+ CN422
+ CN416
FUP SWITCH P.W.B.
+ CN417
-3-
.
i
REPLACEMENT OF CD MECHANISM
o Note that the mechanism of the CD player is very delicate.
Q It is very impo?tant that the spindle motor (witch rotates the disc), and the sled motor (which cases the disc signals to be tracked), as
well as the gear and other components, operate smoothly, without eccentricity.
● When handling the pickup, take care not to exert excessive force, and particular care should be taken not to touch the lens or the
drive
circuit’s P.W.Board pattern.
a. Replacement of the spindle motor
s
First, prepare the new turntable (CM1 -2) and new special washer
(CM I AI) for replacement.
● The removed turntable will be deformed by the heat of the
soldering iron, and cannot be reused.
● Prepare dial type calipers.
(1)
(2)
(3)
(4)
(5)
(6)
b.
(1)
(2)
(3)
(4)
(5)
(6)
The attached bonding material can be dissolved by
using a
60W soldering iron to heat the shaft at the under part of the
turntable (CM1-2) for about one minute.
The turntable can then be removed from the shaft by very
carefully appfying force upward at the center of the lower surface
of the turntable.
Remove the two screws (CM1 -3) and remove the spindle motor
(CM1-5).
Attach the special washer (CM1 +) to the spindle motor.
Apply a small amount of a mixture of the “Three Bond 2001
and 201 5F” bonding materials to the motor’s shaft.
Initial the turntable as shown in the figure. Secure the turntable
by pressing gently. Be
sure to wipe away (by using a price of
cloth, or similar material) any bonding material coming out of
the hole.
Don’t
attached bondin9 material
atthetcoofshaft.
-+$+
Bondhg material
CM14
I
SPECIAL WASHER
————
8-10mm
~-- -
CM1-1
GD-
.
CM1-2
?k-c”’”
Be sure to wipe away
the bonding material.
\
n—————i~cm
I I
SHAFT
‘“’-’w
Ll-
Confirm of inclination for the turntable
Connect the digital voltmeter as shown in the figure.
Set the test disc (YEDS1 8), press the PLAY button (Playback
for the most inner music).
At this time, record voltage value to indicate at the digital
voltmeter.
Access the most outer music, press the PL4Y button (Playback
for the most outer music).
Again at this time, record voftage value to indicate at the digital
voltmeter.
For reference at the recorded voltage of the most inner music,
confirm at * 300mV less than for recorded voltage of the most
outer music.
J
E
Unit
J+
A
T
CM1-2
TURN TABLE
CHUCK PULLY
~
r
CM 1-5
I SPINDLE MOTOR
ISHAFT
1 1
1
1 I
Low Pass Filter
-4-
REPLACEMENT OF CD MECHANISM
c. Replacement and lubrication of the pickup
● Before replacement of the pickup, be sure to carefully read the
section regarding the pickup when the unit is moved or
transported.
(1)
.
(2)
.
(3)
.
.
Remove a pickup rail (CM2) with
a driver from the bottom of
chassis.
When removing or inserting the pickup rail from or into chassis,
take care not to exert excessive force.
When the pickup is reconditioned of replaced,
be sure to wipe
the rails clean and also apply
a coating of FLOIL (G-474B) to
there entire circumference and entire length.
When applying the grease, do not allow any grease to adhere
to any other parts.
Pass the pickup rail (CM2) through the new pickup (CM7).
The pickup P.W. Board pattern is “shorted”,
as shown in the
figure, so that the new pickup will not be
susceptible to the
effects of static.
Set the pattern
to “open” after the pickup has been replaced.
CM6
r 1
I
@
@
I
~ [+
—--i
(short)
(open)
40)
I
I
d. Checking the action of the CD mechanism e. Replaceme- of the sled motor
(1) Disconnect the socket (for the sfed motor power supply) from (1) Remove two Srew (CY1 ) and remove the sled motor (CM3).
the P.W. Board.
(2) Apply a voltage of DC 2.OV to the sled
motor’s terminal.
(3) Measure the current during sled motor
operation.
● The direction of movement of the. pickup (outer groove or inner
groove) can changed by changing the battery polarity.
c
(4)
The current during sled motor action varies according to the
positional relationship of gear @fvf5,
CM6).
(5) If the current exceeds 40mA, remove the gears (CM5, CM6).
(6) Apply a small amount of a FLO[fL (G-474B) bonding materials
to the shaft.
i
-5-
REPLACEMENT OF CD MECHANISM
f. Resetting the pickup to the home position
(1) The limit switch is switched ON by the projection of this rack
gear secured to the relurned pickup, atter which the sled motor
continues to operate (by the circuit) for approximately 30 msec.
: There is then again a reverse operation, and movement to
the position at which the switch k swffched OFF.
(2) Rotation continues during about 30 msec, after the switch is
switched OFF. And then the pickup stops at home position.
cri4
‘CM5
C;4
CM5
CONFIRM OF CD SECTION
a. Preparation
.
Measuring instruments and Test disc.
(1) Test Disc : YEDS 18 (SONY)
(2) Oscilloscope: SS5711 (10 MHz and Dual Phenomenon)
NOTE : CD section of this unit can not need adjustment, because CD P.W.Board checked at automatic checker.
b. Confirm of general operation
(1) Set the test disc.
(2) Press the PLAY button, then confirm the disc ro!aling to clockwise direction.
(3) Press the SKIP/SEARCH button, then confirm the most inner music or most outer music accessing at speedy.
(4) Press the STOP button.
c. Confirm of eye pattern
+~
(1)
(2)
(3)
(4)
Connect an oscilloscope to RF(=IC101 pin41 (H)) and VR
RF ~
(J1315).
Set the test disc, press the PLAY button.
Check to be sure that the “eye” pattern “isat center of waveform
VR ~
and that the diamond shape is clearly defined.
—
Press the STOP button.
TUNER ADJUSTMENTS
. Use a plastic screw driver for adjustments.
. Adjust the intermediate frequency of AM and FM to the frequency of ceramic filter.
Supply voltage : DC 12.OV
Phones impedance : 32 ohms
Function switch : RADIO
a. Parts Location
TP2 TP3
1P12 1P6
p-y ~
L2102
C20CN
El
L2204
En
XF213
o
@3 L2002
4
J2101
1P1
b. AM Adjustment BAND SELECT SWITCH : AM
Step
Adjusting
I
Tuning
Input Connection
I
Output Connection
Adjustment
Circuit Frequency Measurement
Input
Measurement output
Pa7fs
VTVM Oscill
1
AM Sweep
VTVM
TP8 (H)
(45~kHz)
1000 kHz
Generator ‘oop ‘NT Oscilloscope
TP7 (E)
XF213
A
(Non-adiuslm
.
2
Tuning
520 kHz
Digital
TP6 (H)
12204
1.o&o.05v
Coverage
— —
3 1710 kHz
Voftme!er
TP12 (E) _
Confirm 3.8
*0
OSCILLOSCOPE
4 60fJ kHz
AM Signal
VTVM
TPI O(L)
Tracking
L2102
Generator ‘oop ‘NT Oscilloscope
TP11 (R)
5
- Maximum
l&O kHz
TP9 (E)
CT201
DED
b
-6.
c. FM Adjustment
BAND SELECT SWITCH : FM
FM Dummy Antenna :75 ohm
unbala
Step
Adjusting
Tuning
Input Connection Output Connection
Adjustment
Circuit Frequency Measurement
Input
Parts
vTVM Oscill
Measurement
output
n
1
FM Sweep
TP2 (H)
VTVM
(1 O.#MHz)
98.1 MHz
Generator
TP3 (E) OscilloscO~
2
Tuning
87.9 MHz
Digital
Coverage
— —
3
107.9 MHz
Voltmeter
4
t
90.1 MHz
Tracking
FM Signal TP1 (H) VTVM
5
105.7 MHz
Generator
TP3 (E) Oscilloscope
-7-
m
QI
9
Q
e
23
8
26
CDMECHANISM
.
.9
iii
i
o
x
>
(n
tn
.i5j
w
PARTS LIST
PRODUCT SAFETY
NOTICE
EACH PRECAUTION IN THIS MANUAL SHOULD BE FOLLOWED DURING SERVICING. COMPONENTS IDENTIFIED WITH THE IEC
SYMBOL A IN THE PARTS LIST AND THESCHEMATIC DIAGRAM DESIGNATED COMPONENTS IN WHICH SAFETY CAN BEOF
SPECtAL significance. WHEN REPLACING AC0Mp0NEN71DEtWIFIEDBy A, USE ONLY THE Replacement PARTS DESIGNATED,
OR PARTS WITH THE SAME RATINGS OF RESISTANCE, WATTAGE OR VOLTAGE THAT ARE DESIGNATED IN THE PARTS LIST
IN THIS MANUAL. LEAKAGE-CURRENT OR RESISTANCE MEASUREMENTS MUST BE MADE TO DETERMINE THAT EXPOSED
PARTS ARE ACCEPTABLY INSULATED FROM THE SUPPLY CIRCUIT BEFORE RETURNING THE PRODUCT TO THE CUSTOMER.
CAUTION: Regular type resistors andcapac~ors arenothsted. Toknowthose values, refer totheschematic diagram.
Regular type resistors are less than 1/4 W carbon type and O ohm chip resistors.
Regular type capecito,s are less than 50 V and less than 1000 KF type of Ceramic type and Electrical type.
PACKING & ACCESSORIES
REF. NO.
PART NO.
6142898697
6142347350
6142347367
6450115110
6142649602
6142316832
6142931783
6142898857
6450194818
6450057007
A 6142565292
or
A 8450122608
CABINET & CHASSIS
REF.NO.
PART NO.
6142847888
1
2
3
4
5
6
7
8
9
10
11
12
14
15
15-1
152
153
15.4
155
15-6
16
le
21
22
23
24
25
26
27
2e
32
33
34
36
39
42
44
6142897508
6?42847916
614289 le65
614 2e9 8284
6142868928
6142891964
6142847992
6142891872
614284 79G9
6142837351
6142850893
6142891889
6342891896
8?4 2928802
6142926796
6142926789
6742926772
6742926765
6142926758
6142846988
6t4 2846889
6142708316
6142847091
6142776780
6?42708316
6142847084
6142847015
61a 2702178
6?4 2408308
6142847039
6242571446
6?4 2847602
6142847985
6?5 2848074
6142581841
6141300382
6+=289 5313
614’2895313
FIXING PARTS
DESCRIPTION REF. NO.
CARTON CASE
Yol
CUSHION,LE~
Y02
CUSHION, RIGHT Y03
POLY SHEET,l 100X4 OO,SET COVER Y04
CUSHION, CARTON CASE Y05
LASEL,SAFETV
LABEL, CARTON
Yoa
INSTRUCTION MANUAL Y07
REMOCON,RB-Z150 Y08
PART NO.
4110251901
4110252007
4110018801
4110206905
4110214005
4110214005
4110214104
4110214005
BAITERY LID, REMOTE CONTROL YW
4110214005
POWER CORD
Y12 4110214005
CORD. POWER
DESCRIPTION
ASSY,CABIN~
ASSY,OEC PANEL
BUITON,PLAY STOP
ASSY,LID CASSETTE
ASSY,CABIN= REAR
LID, BAITERY
HANDLE
PANEL,TOP
ASSY,LID CD
BUTTON,MEMORY REPEAT
KNOB, ROTARY, VOLUME
KNOB, ROTARY,TON E
BUTTON,CD OPEN
BUTTON,MECHA
BUITON,PAUSE
BUTTON, STOP/EJECT
BUTTON,F.~D
BUT70N,REW
BUITON,PLAY
BUTTON,REC
KNOB,SLIDE,FUNCTION
BUTTON,BASS
ASSY,GEAR
SPRING,WIRE,CASSETTE
ASSY,PULLEV
ASSY,GEAR
SPRING,WIRE,CD OPEN
LEVER,CD OPEN
DAMPER
SPRING,COMP
MOUNTING,PWB
MOUNTING,PWB
MOUNTING, BOSS, MECHA
MOUNTING,TUNER
TERMINAL,ANTENNA
SPRING, PMTE,R/P
LuG,LEAD DRESSING
CUSHION,CABINET
CUSHION,TUNER PWB
.10.
Y13
4110214005
Y14 4110209100
Y15 4110214906
Yla
4120326406
Y19
4120226408
Y20
4120326408
Y21
4120326408
ELECTRICAL PARTS
REF. NO.
PART NO.
51
A 4230167809
52
A 6142412435
53
6142896976
54 5450057960
55
6141299082
61
6450221217
62
6450246531
63
6450192265
64
6142874325
65
614 2B7 4349
66
6142874318
CD P.W. BOARD ASSY
REF.NO.
PART NO.
71
6142896396
CM101
6450101472
DESCRIPTION
SCR S-TPG PAN 2X3,PJP
SCR S-TPG PAN 2X4,RP PWB
SCR BIN 3X6. ANTENA
SCR S-TPG BRZ+FLG 3x1 O,SPEAKER
SCR S.TPG BIN 3X12,
MOUNTING,TUNER
SCR S-TPG BIN 3X12,AC SOCKET
SCR S-TPG BIN 3X12, PANEL,TOP
SCR S-TPG BIN 3X12, GMECHA
SCR S-TPG BIN 3X12, MOUNTING,PWB
SCR S-TPG BIN 3X12,AMP PWB
SCR S-TPG BIN 3X12,
MOUNTING BOSS
SCR S-TPG BRZ+FLG 3X12,TRANS
SCR S-TPG BIN 3x20,CABI-BACK
SPECIAL SCREW,SPRING WIRE
SPECIAL SCREW, DUMPER
SPECIAL SCREW,CD MECHA
SPECIAL SCREW,TERMINAL
DESCRIPTION
FUSE 250V 2A
ANTENNA
SPEAKER
CORD, SOCKET
LUG
FLEXIBLE FLAT CABLE,17P
FLEXIBLE FLAT CABLE.24P
FLEXIBLE FLAT CABLE,l 3P
CORD,4P CONNECTOR,AMP-MECHA
CORD,3P CONNECTOR,
VOLUME-SPEAKER
CORD,4P CONNECTOR,
AMP-PJP HEAD
DESCRIPTION
ASSY,PWB,CD
SOCKET,FPC 13P,CD PICK-UP
cm 02
CW103
Iclm
ICMX?
ICI03
L1451
PR1c12
Q1>301
or
:141
or
a17Bl
or
6450125508 SOCK ET,FPC 17P,AMP&SYSCON
6450060908 PLUG,2P,0PEN/CLOSE SWITCH
4093766104 IC LA9240ML
4093962207 IC LC76622EC-U
A 4093729602 IC LA6541
6450040344 INDUCTOR,1OU K
A 6450137075 PROTECTOR,O 5A 125V
4050020308 TR2SA1037K-R
4050055508 TR 2SA812-M6
405002 67ffi TR 2SA1179-M6
A 4050095207 TR 2SB927-S
A 4050019302 TR 2SA102O-Y
4050144509 TR 2SC2412K-R
4050111008 TR 2SC1623-L6
PARTS LIST
REF. NO.
Q1881
or
R1oo1
R1OO2
RIO03
R1OO4
R1OO5
R?006
R7007
R-008 ‘
R1021
RI 023
R1024
R1025
R1026
RI028
R1029
R1?J30
R1031
R1032
R13111
R1302
R1303
R1304
R1305
R?306
R1309
RI31O
R1311
IW312
R1313
R1314
R1315
R1317
R131e
P7319
R1320
R1321
R1323
R1324
R7325
R1326
R7327
R1328
R7329
R1330
R?331
R1332
R1333
R1334
R1335
R1336
R1341
R3343
R1347
R1346
R7453
R7.w4
R&z55
R1456
R1461
R1462
R1463
R1464
R1465
R1471
R7.472
R1473
PART NO.
4050144509
4ffi 011 1006
4’M 0375004
4010375004
401 0375004
4m 0375004
4010375004
4010375004
4010375004
4010375004
401 0354108
4010354108
4010354108
4010354108
4010354108
4010354108
4010354108
4010354108
4010354108
4010354108
40? 0375400
4010375103
4010375707
4010378005
4010380701
4010389308
4010383603
4010386505
4010339308
4010379200
4010333702
4010375608
4010343702
4010375707
4010387601
@l 0336505
4010375608
4010368808
4010390502
4010390502
4010387809
4010383504
4010387609
4M 0376704
4C1 0360800
4010361908
4010361908
4070380800
401037 560&
4010375400
4010380800
@7 0383504
4530387809
4010383702
4010380800
4010380800
4010382101
4010389001
401038 930e
4010376704
4010387601
401 03a 7601
4M 0387601
4010375400
4010367601
4010386406
4010386408
4070375707
DESCRIPTION
TR 2SC24 12K-R
TR2SC1623-L6
MT-GLAZE 0.000 2A 1/1OW
MT-GLAZE 0.000 ZA 1/1OW
MT-GLAZE 0.000 ZA 1I1OW
MT-GLAZE 0.000 ZA 1/1OW
MT-GLAZE 0.000 2A 1/1OW
MT-GLAZE 0.000 2A 1/1OW
MT-GLAZE 0.000 2A 1/1OW
MT-GLAZE 0.000 2A l/10W
MT-GLAZE 0.000 ZA 118W
MT-GLAZE 0.000 ZA l/8W
MT-GLAZE 0.000 ZA l/8W
MT-GLAZE 0.000 ZA l/8W
MT-GLAZE 0.000 ZA l/8w
MT-GLAZE 0.000 2A l/8W
MT-GLAZE 0.000 2A l/6W
MT-GLAZE 0.000 2A 1/8w
MT-GLAZE 0.000 2A 118W
MT-GLAZE 0.000 2A 118W
MT-GLAZE 1K JA 1/1OW
MT-GLAZE 10 JA 1/1OW
MT-GLAZE 100K JA 1/1OW
MT-GLAZE 15K JA l/10W
MT-GLAZE 2.2K JA l/10W
MT-GLAZE 66K JA 1/1OW
MT-GLAZE 3.3K JA 1/1OW
MT-GLAZE 47K JA l/10W
MT-GLAZE 68K JA 1/1OW
MT-GLAZE 1.8K JA 1/1OW
MT-GLAZE 33K JA 1/1OW
MT-GLAZE 10K JA l/10W
MT-GLAZE 33K JA l/10W
MT-GLAZE 10OK JA 1/1OW
MT-GLAZE 560 JA l/10W
MT-GLAZE 47K JA 1I1OW
MT-GLAZE 10K JA l/10W
MT-GLAZE 47oK JA l/8W
MT-GLAZE 82K JA l/10W
MT-GLAZE 82K JA 1/1OW
MT-GLAZE 56K JA 1/1OW
MT-GLAZE 330 JA 1/1OW
MT-GLAZE 56K JA l/10W
MT-GLAZE 1.2K JA l/10W
MT-GLAZE 22K JA l/10W
MT-GLAZE 220K JA l/8W
MT-GIAZE 220K JA l/8W
MT-GLAZE 22K JA l/10W
MT-GLAZE 10K JA l/10W
MT-GLAZE lK JA l/10W
MT-GLAZE 22K JA l/10W
MT-GLAZE 330 JA 1/1OW
MT-GLAZE 56K JA 1/1OW
MT-GLAZE 33K JA 1/1OW
MT-GLAZE 22K JA 1I1OW
MT-GLAZE 22K JA l/10W
MT-GLAZE 2.7K JA l/10W
MT-GLAZE 680 JA 1/1OW
MT-GLAZE 68K JA 1/1OW
MT-GLAZE 1.2K JA l/10W
MT-GLAZE 580 JA 1/1OW
MT-GLAZE 560 JA 1/1OW
MT-GLAZE 560 JA 1/1 OW
MT-GLAZE lK JA l/10W
MT-GLAZE 560 JA l/10W
MT-GLAZE 4.7K JA 1/1OW
MT-GLAZE 4.7K JA 1/1OW
MT-GLAZE lOOK JA l/10W
REF. NO.
R1475
R1761
R1782
R1783
R1881
R1882
R18a3
R1963
Slool
SH101
X1451
PART NO.
401 a3a7601
4010390403
4010366501
401 O= 3603
4010390403
4010368501
4010383603
401 G36 4701
645012582$
614 28S35734
6450168949
DESCRIPTION
MT-GLAZE 560 JA 1/1OW
MT-GLAZE 8.2K JA l/10W
MT-GLAZE 47K JA l/8W
MT-GLAZE 3.3K JA l/10W
MT-GLAZE 8.2K JA l/10W
MT-GLAZE 47K JA l/8W
MT-GLAZE 3.3K JA l/10W
MT-GLAZE 330 JA l/8W
SWITCH, LEAF,LIMIT
SHIELD
03C,CERAMIC 1693MHZ
DISPLAY P.W.BOARD ASSY
REF. NO. PART NO.
DESCRIPTION
72 61423348296 AS3Y,PWB,DISPLAY
A1601 6450794801 LCD
AM161 6142847978 HOLDER,LCD
CN161
6142552728 SOCKET,24P,AMP& SYSCON
D161O
407 TES 940S PHOTO DIODE SP.S421-1-A
S1601 614 22S35471 SWITCH,TACT,DOWN
or 614240 10CQ SWITCH,TACT,DOWN
S1602
614 = 5471 SWITCH,TACT,UP
or
614- 1CK32 SWITCH,TACT,UP
S1603
6142205471 SWITCH,TACT,PLAY
or
614241002 SWITCH,TACT,PIAY
S1604
6142205471 SWITCH,TACT,STOP
or
6142401 LX12 SWiTCH,TACT,STOP
S1605
6142205471 SWITCH,TACT,P.SCAN
or
6142401002 SWITCH,TACT,P.SCAN
S1608
6142203471 SWITCH,TACT,BAND
or
6142401 W2 SWITCH,TACT,BAND
S1607
6142205471 SWITCH,TACT,MEMORY ..
of
6142401002 SWITCH,TACT,MEMORY
S1608
6142205471 SWITCH,TACT,REPEAT
or
6142401002 SWITCH,TACT,REPEAT
OPEN/CLOSE SWITCH P.W.BOARD ASSY
REF.NO.
PART NO. DESCRIPTION
73
6142848302 A38Y,PWB,0PEN/CLOSE SWIT!
CN158
61427374370 CORD,2P CONNECTOR
CN159
614 OG5 4911 SOCKET,OIP 2P,CD
or
614 23T9752 3CCKET
S1591
6142491355 SWITCH,LEVER
TUNER P.W. BOARD ASSY
REF. NO. PART NO. DESCRIPTION
74 6142698109 ASSY,PWB,TUNER
C2131
4030820201 F%X-YPRO 470P J 100V
C2214
4033542102 NP-ELECT 1U M 50V
CN201
6450125171 30CKET,FPC 13P,AMP&SYSCC
CN211
6142543597
or
614 25?18273
CT201
6450772687
or
6140076336
or
645 Ln2 7731
D2001
407 Lm7 9904
or
4070324406
D2002
4071049302
D2003
4077049302
D2101
4070079904
or
4070124406
D2102
4071547501
IC201 4090160204
IC211 4093792705
-11-
TERMINAL
TERMINAL
TRMMER,1OPF
TRIMMER
TRIMMER,ll PF
DIODE GMAO1
DIOUE 1SS133
VARACTOR DI SVC203SPA
VARACTOR DI SVC203SPA
omDE GMAOl
DIODE 1SS133
VARACTOR DI SVC344
ICLA1186N-AUDIO
IC LA1832ML
SZ’OXVOX1”ZH3HSVM d
L!3ddOlS 3SnVd
‘3NlMdStL3A313SnVd
(3)H3A313SflVd
WWddS 10tMNOCl d
(fl)9NlHdS L33A37NOL_Lll13
L43A37 Nouns 3snvd
(V)9NlHdS t13A31 NOL-lflE
L13A31M3LLn8 dOK3
133A37
Noflns 44
9NltJdS U3A%I NOLlnH AVld
WIA3-I Nouns OMH
U3A31 NOflnE AVld
L43A31NOLlnE CEEl
uolvnlcrv rwuns HSlld
t13A31 mix 3
HOIVflEN’ H311MS
t13ddOlS Md
!3NltidS NtlV W
rwv Em
3sw3’av3H
ASSV 3SV0
SOX8SXSP Llno H3HSVM d
ASSV 31Vld EI=5
$2NltJdS31Vld tlV3S
$lNllddS 10MINOO W
EEh4310NISN3S
ASSV WdV H31?CW H3Nld
9N18dS d 13NVd
13NVd L3tGlH
3SV8 av3H
9XZW M3tlCls
ONIUdS HlnWIZV
Lxzw M3W3 tunwwv
d/M’W3H
Pxzs 3rm ww
Cxzw M3tKY3 aNls(+)
HO1OW’ASSV
AEIH3S L3!ovw 801OW
L3xmHe HoLow
M3W3S Li31WCI LIOl@l
l13G NIVhl
ASSV 133 HIWAII
E“OXS”CXOZkEIHSVM d
l13a 4H
UV39 Ww
9NlEIdS HOIVnlCW 3
SNIUdS‘d3A31tKM.ln803!4
41 ffi I-MSW HCWMS 4V31
9NltidS H3A31 Sd
SbXZW M3t13S ddV1’VH3WVCI
SXZW M3ki3S aN19 ddVl d
H3A313ai7s n3r3
ASSV SISSVH3
~XZW A43wJS ddVl 3
9NlLidS )L3Vd
tlv3944
UOSN3S
ASSV 1338 dn 3XV1
WIA31 AEW#s auooati
9NltLdS NOISN31 )13VS
ASSv 133H AlddnS
NolldltiaS3a
08ZL 110’379
b8CL 6CQS*9
16S1 600 S*9
!121 tLOSP9
IO*L 600 S*9
12*1 600 S*9
SLSL 600s?9
t’l?l 600 SP9
L8ZL600Sk9
bszl 600 Sw
01ZC600SP9
LVZL 600 SV9
Z6ZL 600 ‘W9
O’ZZL600 SP9
091s 600 SP9
6SSL 600 !W9
S8ZL 600 S?9
69*L 600 S?9
8211600 W9
LILL 600 ‘W9
b8zolzz *19
00’SL 600 SL’9
./2’21 L1OS?9
02S L 600 S99
C1SL600SL’9
Zsw 600 SW
80s1 600 Sba
Z19L 600 S?9
09CL 600 SW
L.LSL&10 W9
SS: L 500 Sb9
8ZZL 1LOS179
1SS1 600 S*9
OLSL 110 S99
8WS 997. P19
lobs 600 SP9
SSZL l10St9
88s0 Wz ?19
PSLE LLOS?9
LOO!7120 S99
LZL’Z LLOS*9
SLILc 1LoS*9
ELLL @l S?9
8Z9Z 600 st9
99,!16M ‘3?9
9ELL L1OS79
ELZL LLOS?9
06$’1600 s@9
8’2PL600 S*9
9LPL 604 S?9
bWL 600 S179
SP?L 500 Sw
8LPZ LLOS?9
746211 LOS@9
08/LL 600 SP9
9b8L 600 S?9
ZL’ZL lLO S*9
SLOL LLOS’L’9
89S1 600 SP9
6Z9L 600 S*9
SS,!L 600 S?9
PZ9L 600 SL79
SLSL 600 S?9
Z$LL 600 S?9
“ON lHVd
-tL -
L9W1
99W1
S9W1
b’9wl
C9W1
Z9W1
L9W1
09W1
6SW1
8SW1
LSN1
8SW1
Sswl
bswl
CSWL
Zswl
LSW1
Oswl
67W1
8*w1
L$W1
9bwl
S*W1
V*W1
‘sVwl
Zbwl
LL’WL
O?wl
6CW1
8SW1
,x W1
9ewl
Scwl
bswl
Sswl
Zswl
LSW1
.J~p/~
9Z’W1
Szwl
Vzwl
&zwl
Zzwl
lzwl
Ozwl
6LW1
8LW1
LLN1
9LW1
SLW1
*lW1
CLW1
ZLW1
LLW1
OLWI
60w1
Lloru
LOW1
90W1
Sowl
bowl
SOwl
Zowl
10W1
‘ON”+ltl
H0M34N03 d L4atdo3
AM3LIV9’lVNIWWI1
Z-7VNlWd31 Ak13J_LV9’EMd’ASSV
NOlldlt10S3a
9’287,L6Z*L9
Z8$’N3
8bS96SZ?L9
L9VN3
10fflb8ZPL9 18
.
ASSV C3VQEl”M”d Z-lVNlk4t131 Ak1311V9
1VNIWU31 96?9 LLZ 919
bSVN3
HO1O3NNO3 dZ4Clt!03C9CPL8ZPL9
SSPN3
A13ZlLlV8’lVNlWt131 8@S9 6S2 *L9
ZSPN3
AlddnS ‘d3MOd’dZ dla’L3KK)S LL6? SCOL7L9‘ LSPNO
I-%’NIWH31 AH3LlVS”SMd’ASSV S6C8 b8Z kL9
08
NOlldltL3S3a
“ON lMVd “ON-+hJ
ASSV aklVOS”M”d L-1VNIW1431 AtlqJ-LV9
SNVH1 L43MOd 1SS8 LLZ L7L9V L86P1
WL8L’ldO13ilClNlL908
LLO S99 V LE671
3sn4’ti3a70H 09Lr 900 sib9 v 6@134
3sn4Lu3a70H 09L* 900 Qw v StJ-lo+
2S-+8-SS LIEI 3CLOlCi 00SS 860 LOP
v
afwa
ZS-dE-SS Lib! 30010 00Vt 860 LO? V
zmwa
2s-49ss LIU 3aola 00ss 860 LOP v L86Pa
zs-4s-ffiLIH 3aola ooes 860 Lop v
0S6bLl
l-A&1311VE’dZ’SInld 8060800 SW
66$?49
NOX’AS?dWV’dZ’9n7d ‘2892 bOOSW
86wN3
A7dd(K Li3MOd’13,Md’ASSV ‘26S1 262 hL9
6L
NOildlKIS3a
“ON Mltfd
‘ON-+IM
ASSV CIUVOO”M”d AlddllS t13AlQd
L3X20S 06SL 020919
;0
dZ W 131 NI’EDKX3S 8COL S00 SW
1WN3
L3)130S 3V’EMd’ASSV 88$9 b8Z *L9
8L
NOlldl!dOS3a
.ON lklVd
“ON-53tl
ASSV
CltiV09”Md 13X)OS DV
lZ-dZ HSnd’HCIllMS 820 LS00 S$’9
W.EH
EI0133NN03 dV’ClHO!3 ZE’Z@L8Z PL9
SSWN3
HCIIIMS dCd’EMd’ASSV 6LS8 b8<bL9
LL
NOlldlLd3S30
ON ltlVd
‘ON-d3H
ASSV L3ElV09”Md H311MS KVN
ZXVXOS AHV1OH’HA 80196L0 SW
ZZ2WA
ZX6XOS AUV1O!4’!4A z60@ 6L0 !W9 LZ!7MA
SSV8’LXIZ-dZ HSnd’H311MS S1 Lb 6L0 SW
ZS6VS
NO113Nnj’lS-dZ 3011 S’H311MS ZbSO CLOSW
LSJ5W
NOildlKIS3a
ON ltlVd
“ON..S3H
A8SOZCMI W COW 8SL SO? V
+L80ZL13Z !51 LOLL S60 Sob
V
3-L90ZLISZ EM Z09L S60 SO? V
VdS-SYZIOLOSZ Ml 0080 LZOSCW
VdS-4-ZIOIOSZ Ml bOZO 120 SO*
VdS-9-Z LOLIISZ U 0080120 SU?
VdS-4-ZLOLaSZ Ml bOZO LZOSob
AOSV90 CiHO13310Hd ESCZ 800 W9 V
SCLSS1 30010 909b ZLO LO@
LOVW9 3CiO10 b066 LOOLOb
8’?’8rzlW 3a01a Id3N3Z KY26 S80 LOV
V
H3WV3dS’dS!9nld 0682 WO SW
-zl -
)13W 218S 622 *L9
12’.=$43
3Wn10A’EMd’ASSV 6828 b8Z ~L9
9[
NOlldlL19S3a
“ON lMVd “oN’d3tl
ASSV (ltlV09M”d 31Nfl_kOA
01WVH39’H01VNOS3EI ZL%8 LLZ 9+9
3CI11S’H311MS SOS@SS2 *L9
Mt/L vr zz s3H 3791snj 8020 LLO zo~ v
MtVl Vr 22 S3t! 3791Sn4 bOCL LZOZOb V
M?/L Vr 22 S3!5 3191’M+ L@tL LLO209 V
LIZLNH U 009L S’20S09
ZVV LVEIHi ?UL8 LOL 93*
Slt 1ma Lll Oobs 000 SO*
H%SL8L3SZE11 ZO+JZZLOSUb
Y-VS>63SZ !41 bOZL 020 S09
d-VSP60SZ tll ZOtL O?ll SUP
A-8S@Z3SZ !41 ZOL%bLO SO*
8$2-8St’Z3SZ U1 602S PLOSO?
H-SO?Z13SZ Hi 00S8 lLO SW
S-SO*L L2SZ W @388 LLOSO*
n-ossmsz u 6JJL6ZIO sop
VdS-%9SS3SZ U E06’Z 6L0 StN
ZOZLNld U 0020 LOOSW
WLWLV9 tll 6062 8L0 S09
s3*l K31a Ml Sole 000 sol’
ZOZLNtl W, 0020 LOOS09
W9VLV8 U 6062 8,LOS09
S3?LL31Ci Ml EOLC000 S09
ZOZLNH Ul S020 LOOSO*
WPVLVS Ml 6062 8L0 sOti
S3bLLCUCl Idl COLP,000 S@
ZOZLNEI tll 0003 LOflSOP
WLWLVEIU 6062810 SOP
S3@LL3MI tll COLE000 SQb
ZOZINtL !41 0020 LOOS09
W’W1V8 Ml 606Z 8L0 S07
S3?L L91a tll COLS000 S0?
ZOZZNtl Ill 80LL LOOSO?
WPVLNS kll SO$Z 8L0 S@
S3b LLV1O U 80S0 000 SO@
)1-LOOZ3SZ tll ‘ZOPLZLO SOP
V
LIZINH W 009L SS0S09
ZPVLV8 !41 bOL8 LO1 S(IV
Sit’ LLCMCItll 00b8 000 SU?
LLZLNH 81 009L S’20S09
Z9VLVE U bOL8 LO1 SOP
‘31*L L31L3 t!l 00~ 000 SOP
ASZ1 Vb’0rU013310!jd 66*Z *1O SW V
1103 3’S0 8bOZ ?S0 i3L9
x noo L’uo13naNl L8sb Loo sw
dA-+OOSOL8S 31 60t’6 bSZ 60?
)16ZZ8V131 ZOPL S62 60P V
N890ZV131 LOS@LSE60P
NOlldlt10S3a
“ON lHVd
LCSIX
Seas
L>57H
6>%?!4
6919H
10
m
wb570
m
JO
zaabo
Jo
Jo
Jo
10
m
L2;$Cl
10
m
LOLti
m
X3
w cm
40
10
SOLb?)
m
m
L@lKl
.?0
m
‘saLso
no
YO
20 Lt@
LOL$KI
no
m
20S L.3
M
m
LOSLO
11%-M
206>1
LOSil
C1Z31
ZLZ31
lL~l
‘ON’+3!d
002 L-ZLLOSdX!3 al
cc LSSL 3aola
LOVW9 aaola
S:LSSL 3aoia
LOVW9 3aola
&CLSSL 3aola
Iovrm 3aola
SSLSSL 3aola
LOVW9 3aola
8CL171W 3aoia ld3N3Z
H311MS d/H’dti’9nld
WSINVH33W 3dVL’dP’WLld
AlddnS H3MOd’dZ’L3K10S
AlddnS t13MOd’dZ’13X30S
aV3H d,M’db’9n7d
H0133NN03 dz’aHo!3
7VNIWH31
lVNlWLd31
H3Nnl’dC L3d#L3Y30S
L30”dL L3djCL3XOCX3
80SC 69Z Ot ?
90W Z1O LO?
b066 LOOLOV
90b@ Z1O LOV
P066 LOOLOP
80@b ZLO ZO@
bo66 Loa Lo@
80W ZLO LO*
b066 LOO,!07
S089 650 LOP
V
90LZ bOOS*9
&:9L LLOSW
6026 CZZ L7L9
8bS9 OZO*19
S160 900 SW
8SEP L8Z *L9
L6S8 Hz *L9
S&28 KZ tiL9
LLLS ZIOSW
8LZS ZLO S*9
L99Z SSZ t?L9
901L 8s0 sop
00b0 SCL &OL’
LOSS SZL SOb
LOL98s0 SW
LOSS SZL Sot
LOL98S0 SOP
20SS S$L $33?
20SS SEL S09
SOLb SSL EUb
86LZ 262 *L9
NOlldltJOS3a ‘ON lLdVd
ASSV ClHV09”M”d NOOSAS%13141dWV
AVldSIO’d9Z’13)K30S
AOSr dOOOL H31S3A10d
ASZ w noofx 1’3313
A9L w nooo L13313
AOS W nS L’O$d31S3A10d
A9 LW nOOOL13313
AOS W nS L“Ot131S3A10d
AE”9 W nOCOL13313
AS’9 W nOOOL19313
AO1 W nOOZZ 13313
NCIX’AS8dWV’9Md’ASSV
zHws9’01’31wvH334 H3sla
ZHWS90L’21WVH33’M3SI0
ZHYOS?’t131114
ZHWS90 L LEllll+ 31WVt133
H317H
ZHWS901 KUlkl 31WVL133
M31114
ZHW80L-91’31’H31114
ZHWZ’L’1V1SAH3
ZH)18Sb’31WVH33’3S0
HOlVNOS3tl
SACZLV1O 81
SAP LLVICl U
b9SLVSZ Ml
8bOb!3SZ Hl
SA?1LV1O tll
b9SLVSZ Ml
3-6E8ZCV3Z Hi
8POb3SZ tIl
SA>l LVKI tll
WSIVSZ Ldl
CI-6C8Z2SZ !41
O-W1O8KX3Z H1
3-6E8ZOSZ U
3S0’SNVH1
VNN31NV !dV9’1103
1100 4“H”A
1103 j“H”A
nLo wv’HocmaN[
awis Lzf31 31
NOlLdlU3S3a
089S 800 SW
9Z9,! 800 sb’9
6W09PZ *L9
609S 600 SW
S08’S 6ZZ L7L9
6098600 Sb9
S08’2 622 *L9
SbOL 2S29i9
lSbZ 622 PL9
tZOO 010 SW
0L809?2 *%9
6099280 Sob
bo60 000 sob
Z41/lS980 SOb
6080 L:O W@
P060 000 so?
201s 9C0 sop
90808 LOSU9
6080 LCOSW
L05a 000 S07
Zon 9E0 SOP
8090 9L0 SW
206,! 910 SO?
9080 9L0 SO?
6WL’ ‘WZ PL9
fmo PZo siP9
9S9b ESZ P19
bSSl ZOOSW
IEZO 622 bL9
b6b0 S:0 919
b990 ZLO S>9
SOZb EL: 60b
“ON MWd
z96ha
40
coLva
10
zat ba
loLL’a
LLPN3
9LVN3
Jo
SL9N3
ZL>N3
OLL’N3
10
SGLN3
ESLN3
ZSLN3
1SLN3
8 L69’J
‘2L6b!J
9 L8?3
bLSb3
9LLb3
VL.Zb!J
8SSL3
SOSL3
LOSLCl
SL
“ON.d3kl
10
9124X
ELZ4X
10
ZLZ3X
Jo
L
LZ4X
LOZ4X
LOZZX
Jo
LOLZX
LOZZO
10
9azzo
20220
10
LOZZO
OLLZO
20 Lzo
10
101ZO
Jo
LOOZO
mzzl
9aia
zaLzl
saoz7
10
k~ll SIWdlSll SlklWd
EXPLODED VIEW (TAPE MECHANISM)
EXPLODED VIEW (CD MECHANISM)
‘“-j p
~_——
I@
—_—_—_—__
—_____
,
I
co
I
—
–CM1-2
/
..—”
!
64
TM 03
$?&
TMO1– .
)
,( .
TM02 ,,%5 ! - ‘M04
I
1
I
i I Ii Ill CM
*TM31
&
TM32
TM34-$$.. .
TM35–~
TM36~ I +J
TM33
~ [ ~TMo~ TM07
-ill K
/Oi-TMo8
TM37
4
TM49–& I ,
!$
—TM17
TM19–
d
f
I TM5(#&j~
‘&#
TM51– -
I -w. i-’ I T
TM21—
I
81—~
I U&l
_. :
I
TM53--ca.f-’tsh.uc
8
PARTS LIST
,,.. ~ I 7TM24
CD MECHANISM (CD94C12-SH)
iTwai bTM63
., ,
TM25
4L-
TM24q ~
\
!’
&
TM26~
.-
.-
.
TM27
RSF.NO.
PART NO.
CM1 6142791912
CM1-1
6142622575
CMI-2 6142637739
CM1-3 4110447502
CMI-4
4120320208
CMY-5
6450077827
CM1-6 4120145603
CM2
6142377024
or
6142778029
CM3 6450077814
a’A4 6142377093
DESCRIPTION
ASSY,CHASSIS,BASE MECHA
CHA.%IS,BASE MECHA
ASSY,TURNTABLE, SPINDLE
SCR PAN+SW 2X5,SPINDLE MOTOR
SPECIAL WASHER,
ADHESIVE ESCAPE STOP
MOTOR,CD-SPINDLE DC 0.2W
SPECIAL WASHER.
TURN TABLE SUPORT
SHAFT.PICK UP RAIL
SHAFT,PICK UP RAIL
ASSY,MOTOR CD-SLED
GEAR,SLED RETARD GEAR 1
REF. NO.
ctd5
CM6
CM7
or
CM8
CM9
CM1O
CY1
CY2
PART NO.
61423771C9
6142377116
645006 79S3
6450188879
614262 259S
6142366934
6450078873
4110448034
411 1524301
DESCRIPTION
GEAR,SLED RETARD GEAR 2
GEARSLED
PICKUP,lJ&ER SF-P1OO
PICKUP, IASER SF-Pi OOB
GEAR, RACK,PICK
SPRING, COMP,PICK RACK GEN
FLEXIBLE FLAT CABLE,PICK UP
SCR PAN+SW 2X8,SLED MOTOF
SCR S-TPG PAN PCS 1.7X6,
PICK RACK GEAR FIX
SPECIAL SCREW,SLED GEAR FI
SCR S-TPG PAN 2X8,PWB FIX
“x
TM62–
CY3
CY4
412C47391M
411022B408
-14-
-15-
-LL -
-9i -
a
3V0 U4L
*,,,
IF&j
@m -m.-
-...
.
OQ2
-
O.*
u
.s,’s
ASas
K.as
*A
-,73
-.4?3
I
WI 101pu(uuai
@aIW aw
o
I
-Ellnw ] %
‘%O%WJWOUON[ - I 5N I w
I
.1.:- a% ‘.I+.:OWE t16i70!+l
I
I
I
.PIWW JOIOUJcs!a JOJpU!LUJaI- 0
+A73 a
lJa.PXHJU.l UCUS!alUl&IEUUQN Ild 1531
,
ZLS31 11
wuww laAal eo!Is101pu!uuet vdu! IEWEISw33
I
NIW33
01
.IOIIUCQ[a* acslsw ieu!uuai mdmo pufi!s wd3
o
0W33 6
F@40 JotDunom
-
SS’A e
JOIISUILUWucicauuco amp!sati
I
L3sl 9
09A u!-u!nq101IW!UIIOI punolg -
SSM *
.pqum ~A p.uawa
ml Pu!~Jal Wtio uosveckucaa5e@ au
o
OiJd c
Wi JOIIeu!uue]
U-@ I
P/l z
palap p IEUEHSp=asp JOIPUILUBI
mdul
I
1?430 L
-n
pg6!a UIOIJPU61S I04UOB uo 6UW3EIL101u!d mdul I .dnmld JOa~!a O$O~d10IU!d uOl&%lllJ~ [
MOTUle~ : H = 1~1 .Y3SSaXIJd,EU !s ley la
3< = LN14-ZN14 ‘4H = 1N14 + ZYkl I
uou PU61S IOIIUWJu!e~ 6U!WEJL10I U!d mdu] I .do~ld JOawla OLOud10I Uld u01W311U~ I
(JOSSaOOJd leU6!S OAJJS) 7w0tiZ6Vl )OL31
NOlldlE10S3Cl ‘8 WVk19VlCl Y3019 01
IC BLOCK DIAGRAM & DESCRIPTION
IC103 LA6541 (Pickup Actuator& CD Mechanism Motor)
IC BLOCK DIAGRAM & DESCRIPTION
IC151 CXP50712-120Q (Micro Processor)
No. Pln Narrm Uo
Function
T
SEG18 - M used
2 SEG17 - Not used
3 SEG16 - N-a
used
4
SEG15 - NciUsed
s. SEG14 o
LCD segment signal
6
SEG13 o LCD segment signal
[
7
SEG12
o LCD sqm
ent signal
s Clze-,, f-l , fin . ..-...-”. . .. . .
No. Pin Name
Uo
Function
J
41 I
SELECT
I
I
~MOdel 5.9M imd
42 I
SYNC-REC [ I )Synchromza&mrecmdrag S&VI s!gnd
I
43 NC - lNot used (VDD)
44
COCK o Inter Face {U DSP IClcck)
45 COIN
I Inter
Face Iu OSP (Command data ou$mi)
46 SOOUT
I Imw Face br
COP(Suffi data input)
“. $.,- ,., .,n-r , n-..,--, .. . .
C4
ACAN signal
I I WWCI ,WUU4 Uact) input
1.,-. —._*
i,-m
1-
-, , “W-,!.-!.”! , r ,“=.. !- ,!pm
49 I POWER-SW I ‘ lm-.---A-
.
I
.,!-” ! ,
1
“ ~..,,, .91 ,,v, ,, .,g, ,al
’31
SEGIC?
[ O ILCD
segment s!gnal
@ I
SEG9 1 0 ILCD
segment signal
A 1’ ‘n ---merit sgnal
Tent sgnal
IC201 LAl 186N (Tuner System)
IC211 LA1832ML (Tuner System)
mm! .i..al I
?7 ~
SEG2 o LCD SW ent sgnal
lei SEG1
o LCD sew
al sgnal
191 SEG2 o LCD sqme Ill Sgrlal
ml COM3 o LCD cmnmon signal
21~
COM2
cc,!,, 1 n II fin . . . . . . . .. . . . I
D I AMP-MUTE [ O IOUIPUI tti IOr
amphfier mute
_-. ..——
al
(H-ON)
.-4- 1
l-!
““l., , “ .V” w! r,, ,!”! , -y a,
.
-“!.1; o LCD common signal
VLC1
o LCD bias
VLC2 o LCD bias
we, r-) I cl-) hi.
“al-
t#db-Pl 1 i
IC221 LC72131MD (PLL Frequency Synthesizer)
.W m
* 1.
A ,.
. h.
c.
.,
,, :.
CL
.
m.
IC412 TA8229K (AF Amplifier)
“cc, “c,,
B
a.
. e.,. ,
,.. ! ,,
c,-,
5 ml. ,
*, ,0 .
,!.$ c:=tulr
.: LT.:, ~ T**U C.,,. ur
, 000
FGOIEC 7,3.
$. , !,
,,.2
3
w?.,
w, ,,
7 ,.s.2
.0[ Pc2
I - It+xomdim
7, I \,cc I - Icrur,
I
721 XTAL
I O Iconnea @@ulor IW d~ (2MHz)
n I .,. I I*I.+ —- {
Wc5.
.! 34f
VDD - Power SUp@y
S51 KEYl
I Key inpul
S5~
f KEW? I Key irqwl
KEY3 I Key ir$nt
.m . i ,,-. :—.
A
, &h
innbfi
=., .
331
k,. , , ,lvsy”qM
sz~ FUNC
1
I lFunction . .. ... . . .... . .
‘lot
DIST I I Destinat!cm input
J
I
51m7#mm2mm
A1601
IC413 S-87050CF-VP (Voltage Regulator)
,
m
Vw 5
6
VW,
REFERENC
VOLTAGE
VSEN
vOLTAGE
DETECTOR
3.2
V.m CD Vss
-18-
-19.
i
,,,
Ill
r
?J
0
II
e--------,----~[::-,-;--j-[::-
/77--””
I
—
‘ ~ 1111h-----+
MiJm
m
[
n
—.—.
J
II 1 t
N
W
--i+’-
I
I
L---
1 I
This is a basic schematic diagram.
i
WIRING DIAGRAM (TUNER)
TUNER P.W.B
-22-
i
WIRING DIAGRAM (CD)
1
1
CD P.W.B
-23-
SCHEMATIC
I
I
ir
1>
!!
I
I
l.._.
(CD)
I
I I=T ‘1 L
I I I
.,.Q
. .
) ‘“ -
,,.,
)
>Pm
7
yp
*“ =
.
,SI
,V.m
-m
.—
w %3’
II
I
h i-l
LKc
(
Ill
1 1.7. lF~lI
Q. ._.
mm m
I
Ill I
I
I
I
I
I
I
I
1 =1 IL I
..
1 1
!
..—
-1 Ill 4
I
1
T 1
1 1
1
!
)
1
I
1,
T I
IllI I II
1
1
I
I
I
I
1
L L
1 1 1
1 I
11
1
1
I
CN102
,, -.5--
E
2
92WT
COIN
KKK
s
XRST
.
Dw
GFC12
GW3
,0
L-CH
,,
R-CM
,2
W1
,>
w
,4
+%1
,,
Wc m
,’
LIHIT
,?
Gt$l
*
I
I
.—..—..— ..—-.—.. — .-—..—..— ..—--—..—--—..—.-—. .—.-—--—..—--—.-—- .— --—--—-.—--—..— -.—--—--— --—-.—-.— ..—--—-.— ..—-.—
This is a basic schematic diagram.
-24-
-25-
ii
.—
—.— ._. _ ._. _
I
!.. ..—
N
m
ru
-4
l.’?
—
—
—
—
—
—
—
—
—
—
$
>
I
I
—
1==
l-ii
,
1 I
I
1 1 I
—
—
—
—
—
---’--+
I
—“1
II
II
i-.–_
–i
11;
k
~. —–.
1’
l;
L._. J
----k
~~,
M-
IC412 (!/2) 1A82291(A :
/,.,,,,>.,./,
J.,, .:
~ @b
I
I
WIRING DIAGRAM (AMPLIFIER & SYSCON)
-.—
BATTERY TERMINAL -1
P.W.B
P.W.B
AC SOCKET
P.W.B
I
/
BAITERY TERMINAL -2 P.W.B
-28-
OPEN / CLOSE
SWITCH P.W.B
R / P SWITCH P.W.B
,.,
CJ
0
r
--35!57
‘“”ikE’’lM%rm.
,SuA
kl-
.—
m—
w
l,iD40!cK468!A (CA, W,>
m
,.–.–
/’:””
I “M
N%
D!6!0
s+.,,
‘o’
I
CNi52
,0m
—.— -—.—.—.—.—
-.—-—.—.———.—.—.—.—.—.—.—.
1AMO1K46WC
1
I
—
~
1AD49!OC4603A (Au> :
.J
This is a basic schematic diagram,
.
DISPLAY P.W.B
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Sanyo MCD-Z250F User manual

Sanyo
Brand
Sanyo
Model
MCD-Z250F
Category
CD players
Type
User manual

Sanyo MCD-Z250F is an audio system with a CD player, cassette player, and radio. The CD player can play both audio CDs and CD-Rs, and it has a number of features to enhance your listening experience, including a programmable track order, repeat play, and random play. The cassette player can record and playback cassettes, and it has a number of features to make recording and playback easier, such as auto-reverse and Dolby noise reduction. The radio has a built-in antenna and can receive both AM and FM stations.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents