START USING BLUETOOTH KEYBOARD
1) Operating System
- Press “Fn” + “iOS” for iOS
- Press “Fn” + “Windows” for Windows operating system
- Press “Fn” + “Android” for Android
2) Operating System
Charging the Bluetooth keyboard
When the battery is low, the power LED indicator starts flashing, indicating that the Bluetooth
keyboard requires charging.
1. Connect the “B” end of the Micro USB cable provided, to the Micro USB port of the
Bluetooth keyboard.
2. Then connect the “A” end of the Micro USB cable provided to the USB port of the power
adaptor or computer.
3. During charging, the “Charge” indicator will be lit up. When it is fully charged, the “Charge”
indicator will go off.
Note:
1. When not operating the Bluetooth keyboard, turn it off to prolong battery life.
2. In order to prolong the battery life, it is recommended to charge only when the “Charge”
indicator is flashing and do not charge less than 2 hours for each cycle.
Power-saving ‘Sleep’ mode
When the Bluetooth keyboard is not in operation for about 15 minutes, it will enter “Sleep”
mode and the power indicator of the Bluetooth keyboard will be turned off. Simply press any
key and wait for 3 seconds for the power indicator to light up and resume operation again.
Safety Tips
1. Keep away from the sharp objects
2. Do not exert high pressure
3. Keep away from microwave
4. Do not forcefully hit or bend the Bluetooth keyboard
5. Keep away from oil, chemical or other organic liquids
3) Operating Functions
Cleaning the Bluetooth keyboard
Clean with clear water, alcohol or alcoholic disinfectant for the Bluetooth keyboard.
Connecting the Bluetooth keyboard
Step 1: Slide the power button to "ON" position and the power indicator will light up 4
seconds and then turns off.
Step 2: Press the Bluetooth keyboard's "Connect" button and the Bluetooth connection
indicator will flash and it is ready for pairing.
Step 3: Tab on the "Settings" icon of the tablet (eg. iPad).
Step 4: In the "Settings" screen, select "Bluetooth" and on the Bluetooth settings screen, tap
the Bluetooth switch to turn on Bluetooth function. The tablet now automatically
searches for any nearby Bluetooth devices.
Step 5: Find (Valore-BTK380) and click “Connect”.
Step 6: Enter the password displayed on the screen to begin connection with the Bluetooth
keyboard.
Colorful backlit function
Press “ ” for backlight function
- Once to turn on the backlight
- Twice to increase the brightness
- Thrice to turn off the backlight
Operating Functions
1. Buttons
Power switch: Slide switch to the “ON” or “OFF”
position to turn on or off.
Connect button: When the Bluetooth keyboard is
switched on, press the “CONNECT”
button to prepare the Bluetooth
keyboard for pairing.
2. Indicator
Power Indicator: When the power switch is “ON”, the
power indicator LED will light up for 4
seconds and turn off.
Bluetooth indicator: Press the “CONNECT” button and
the Bluetooth indicator flashes
and turns off when the device is
successfully connected.
Caps Lock indicator: When the Bluetooth keyboard is
typing in uppercase, the “CAPS”
LED indicator lights up.