Feiss P1450CPR Installation guide

Type
Installation guide

This manual is also suitable for

1
Installation Instructions for
Nico Pendant
1.0
P1450-P1451
Pendant
P1450, P1451
Feed the fixture wires through the fixture loop and screw the fixture loop onto the fixture.
Follow enclosed supplement installation instructions for electrical and fixture installation onto junction box.
Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.
1
2
1A
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
LAMP
2
3
SOCKET
FIXTURE LOOP
FIXTURE
1
3
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing compliant junctionNEC
boxes.
This product is safety listed for damp locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED LEDlamps may be dimmed with a dimmer. Consult lamp manufacturer for
additional information.
This instruction shows a typical installation.
4
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, 60077IL
800.323.3226 - 847.626.6300
www.Feiss.com
© 2017 Feiss.All rights reserved.The "Feiss" graphic is a
registered trademark of Feiss. Feiss reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Feiss P1450CPR Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI