Husky C041H Installation guide

Type
Installation guide
START
AIR COMPRESSOR QUICK START UP GUIDE
Model: C041H
SKU: 1001622795
Pull the ring on the safety
valve to release air for
about 20 seconds (if any).
Release the ring to close.
Close regulator knob by
turning in a counterclock-
wise direction until the
outlet pressure reaches zero
Attach air hose to the quick
coupler (air hose and
accessories NOT included)
Close the drain valve by
turning in a clockwise
direction.Drain tank after
every use.
Plug in the power cord.
Use of an extension cord is
not recommended with this
product. Please use a longer
hose instead.
Turn the switch to the ON (I)
position. After starting, wait
until the compressor shuts
off before using.
Adjust the pressure
regulator by turning in a
clockwise direction to the
working pressure of the tool.
Ensure the switch is in
the OFF (0) position
111
33
3
44
4
55
5
66
6
77
7
88
8
22
2
  • Page 1 1

Husky C041H Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI