0232014
XXXXXXXX
AIR COMPRESSOR QUICK START UP GUIDE
Ensure the Switch is in
the OFF position.
Pull the ring on the Safety
Valve to release air for about
20 seconds (if any). Release
the ring to close.
Close Regulator Knob by
turning in a
counterclockwise direction.
Attach Air Hose to the Quick
Coupler (air hose
accessories not included).
Plug in the power cord.
Use of an extension cord is
not recommended with this
product. Please use a longer
air hose instead.
Adjust the Pressure Regulator
by turning in a clockwise
direction to the working
pressure of tool.
Turn on the Switch to the
ON position. After starting,
wait until compressor
shuts off before using.
Close the Ball Valve by turning
in a clockwise direction.
Drain tank after use.
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI