Moen T8342CBN-8370HD-L Dimensions Guide

Type
Dimensions Guide
MOEN SPECIFIER SER VIC ES 1-800-321-8809 Ext. 2158
www.moen.com
1943060560320B687A
CRITICAL DIMENSIONS
(DO NOT SCALE)
36"
(912mm)
12"
(305mm)
FLOOR LINE
ESCUTCHEON
HANDLE
DIRECTION
OF HANDLE
ROTATION
6-3/4"
(171mm)
L
C
3" (76mm)
MIN. WALL
CAVITY
6'-6"
(1981mm)
NOMINAL
7" (178mm)
ESC. DIAM.
4-1/2” (114mm)
PLASTER GUARD
OPENING
2 1/2" MAX.
(63mm)
1/2" MIN. CC (13mm)
5/8" MIN. IPS (16mm)
FINISHED
WALL LINE
3-16" - 2"
HC
F
O
3-7/16"
(87mm)
2-3/4"
(69mm) Min.
3"
(76mm)
Min.
Wall
Cavity
2-3/4"
(69mm)
Platerguard
Opening
5"
(127mm)
Esc.
Diameter
Vacuum
Breaker
28-1/2"
NOMIMAL
(723mm)
FLOOR LINE
6'-6" (1981mm)
NOMINAL
DROP ELL
TUB RIM
FINISHED
WALL LINE
1/2-14 NPT
1/2-14
NPSL
THREAD
2" Dia.
3-5/16"SPRAY
HEAD
DIAMETER
8-1/8"SPRAY WAND
HEIGHT
DESCRIPTION
Metal construction with Chrome plated or Classic Brushed Nickel (CBN) finish
Pressure balancing cycle valve design with 1/4 turn stops
3 function transfer valve
1/2” CC connections
Contains: stationary showerhead, hand-held shower with non-positive pause,
69" metal hose, 30" slide bar, drop ell, vacuum breaker
Slide bar is NOT DESIGNED TO BE A GRAB BAR
Applicable components are supplied with vandal resistant screws
OPERATION
Temperature and transfer valves both have ADA compliant lever style handles
Temperature handle operates counterclockwise through a 270° arc with off
at 6 oclock, and the maximum hot at the 9 o’clock position
Adjustable temperature limit stop
Pressure balancing mechanism maintains selected discharge temperature to ±
Transfer valve operates 3 distinct functions
FLOW
T8342 (2.5 gpm/9.5 L/min) - Chrome finish
T8342CBN (2.5 gpm/9.5 L/min) - Classic Brushed Nickel finish
T8342EP15 (1.5 gpm/5.7 L/min) - Chrome finish, WaterSense® certified
T8342EP15CBN (1.5 gpm/5.7 L/min) - Classic Brushed Nickel finish, WaterSense® certified
CARTRIDGE
Pair with a brass Posi-Temp rough-in valve:
8370HD*: 1/2" CC connection without integral stops
8371HD*: 1/2" CC connection with integral stops
8372HD*: 1/2" IPS connection with integral stops
8373HD*: 1/2" PEX connection with integral stops
8374HD*: 1/2" CPVC connection with integral stops
8375HD*: 1/2" UPONOR connection with integral stops
*Includes the 1222HD Brass Posi-Temp Cartridge
Nonmetallic/nonferrous and stainless steel materials
Also requires the 3360 3 function transfer rough-in valve
Accommodates back to back installations
STANDARDS
Third party certified to: WaterSense® (only applies to 1.5 gpm), ASME A112.18.1/CSA B125.1 and all
applicable requirements referenced therein
ADA for lever handles
WARRANTY
Warranted for 5 years against material or manufacturing defects
Three-Function Commercial
Shower System
Rev. 11/12
NOTE: This valve is not intended to be used as a shut-off valve. To prevent the potential of cross flow, check valves must be integral to the supply valve or installed in both hot and cold water supply lines.
C O M M E R C I A L
EP Models Only
TUB
SHOWER
FLOOR
1/2" CC
SUPPLY
2-5/16" (59mm) C.C.
4-1/2" (114mm) PLASTER
GROUND SIZE AND
WALL OPENING
2" CC (51mm)
1 7/8" IPS (48mm)
MAX WALL
FINISHED WALL LINE
FACE OF STUD
32" (813mm) - TUB OR
TUB SHOWER
45" (1143mm)/
48" (1219mm) - SHOWER
2-7/8" MAX.
(73mm)
7/8" MIN. CC & IPS (22mm)
1"
(25mm)
FLOOR LINE
1"
(25mm)
L
C
2-1/8"
(54mm)
3/16" (typ) (5mm)
PLASTER GROUND
3-1/2" (89mm) MAX.
2-1/4" (57mm) MIN.
PLASTIC
TUB/SHOWER
SURROUND
DIAMETER
WALL
OPENING
POSI-TEMP® VALVE
Pressure-Balancing Valve with
1/4 Turn Stops
Models: 8370HD (CC) without 1/4 Turn Stops,
DESCRIPTION
Brass construction
1/2" CC or IPS Uponor connections (with 1/4 turn)
Pressure balancing, four port, cycle valve
OPERATION
Adjustable temperature limit stop to control maximum hot water
temperature
Pressure balancing mechanism maintain selected discharge
temperature to ± 3.6°F
CARTRIDGE
1222HD brass cartridge design
Brass construction stainless steel materials
Accommodates back to back installations
STANDARDS
Third party certified to: ASME A112.18.1/CSA B-125.1 and all applicable
requirements referenced therein including NSF61/9
Moen’s Posi-Temp® and Moentrol® valves with graphite composite
spools combined with Moen’s Eco-performance showerheads meet
the performance requirements of pressure and temperature
variation of ASSE1016 when tested as low as 1.5 gpm
WARRANTY
Warranted for five years against material or manufacturing defects
CRITICAL DIMENSIONS
(DO NOT SCALE)
1 9 4 3 06 05 6 03 2 0B 6 8 7 A
MOEN SPECIFIER SERVICES: 1-800-321-8809 Ext. 2158
www.moen.com
Rev. 1/13
C O M M E R C I A L
8371HD (CC), 8372HD (IPS), 8375HD (Uponor)
  • Page 1 1
  • Page 2 2

Moen T8342CBN-8370HD-L Dimensions Guide

Type
Dimensions Guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI