SharkBite SBDS123814 User manual

Category
Sanitary ware
Type
User manual

This manual is also suitable for

SharkBite SBDS123814 is a 1/2 in. x 3/8 in. OD Compression x 1/4 in. OD Compression dual shut-off valve. It is used to independently control the flow of water to two household plumbing fixtures and appliances from one valve. The innovative design with 1/2 in. push-to-connect inlet makes for quick installation and quarter-turn, full-port brass ball valves make for easy operation. It is ideal for working in tight spaces and compatible with PEX, copper, CPVC, PE-RT, and HDPE pipe. No special tools, crimping, glue or soldering is needed and it can be installed in wet lines.

SharkBite SBDS123814 is a 1/2 in. x 3/8 in. OD Compression x 1/4 in. OD Compression dual shut-off valve. It is used to independently control the flow of water to two household plumbing fixtures and appliances from one valve. The innovative design with 1/2 in. push-to-connect inlet makes for quick installation and quarter-turn, full-port brass ball valves make for easy operation. It is ideal for working in tight spaces and compatible with PEX, copper, CPVC, PE-RT, and HDPE pipe. No special tools, crimping, glue or soldering is needed and it can be installed in wet lines.

Description
Used to independently control the ow of water to two
household plumbing xtures and appliances from one valve.
Innovative design with 1/2 in. push-to-connect inlet makes for
quick installation and quarter-turn, full-port brass ball valves
make for easy operation. Ideal for working in tight spaces. Faster
install time and ease of use reduces installation errors.
Features And Benets
Sleek chrome nish for an attractive appearance.
Quarter-turn, full-port brass ball valve.
Compatible with PEX, copper, CPVC, PE-RT, and HDPE pipe.
No special tools, crimping, glue or soldering is needed.
Can be installed in wet lines.
Ideal for working in tight spaces.
Remove using a Disconnect Clip or Disconnect Tongs
(both sold separately).
Specication Data
Temperature Performance
Minimum working temperature 33°F
Maximum working temperature 160°F
Maximum working pressure is 125 psi
Flow Rate
1/4” Compression 2.2 GPM at 20 psi
3/8” Compression 4.0 GPM at 20 psi
US Contact: 1.877.700.4242 • sale[email protected]om • sharkbite.com
Canadian Contact 1.888.820.0120 • canadasal[email protected]om • sharkbite.ca
Product Submittal
Name
Date
Architect/Owner
Contractor
Tag
Notes
SS_Brass Push Dual Shut-o Valve_04_2020_V01 • Date issued 4/30/20
Brass Push Dual
Shut-o Valve
Specication Sheet
Materials
Valve body DZR LF brass
Handle Zinc
Valve ball DZR LF brass
Seat PTFE
O-ring EPDM
Grab Ring SST 316
Tuber Liner Polysulfone
Part Listing
SBDS123814Z 1/2 in. x 3/8 in. OD Compression x 1/4 in. OD Compression
SBDS123838Z 1/2 in. x 3/8 in. OD Compression x 3/8 in. OD Compression
Dimensions
Codes and Listing
cUPC
ASME A112.18.1
CSA B125.1
NSF/ANSI/CAN 61
NSF/ANSI 372
US Contact: 1.877.700.4242 • sale[email protected]om • sharkbite.com
Canadian Contact 1.888.820.0120 • canadasal[email protected]om • sharkbite.ca
Part Number DIM A (IN) DIM B (IN) DIM C (IN)
SBDS123814Z 1.79 1.66 1.56
SBDS123838Z 1.79 1.79 1.56
  • Page 1 1
  • Page 2 2

SharkBite SBDS123814 User manual

Category
Sanitary ware
Type
User manual
This manual is also suitable for

SharkBite SBDS123814 is a 1/2 in. x 3/8 in. OD Compression x 1/4 in. OD Compression dual shut-off valve. It is used to independently control the flow of water to two household plumbing fixtures and appliances from one valve. The innovative design with 1/2 in. push-to-connect inlet makes for quick installation and quarter-turn, full-port brass ball valves make for easy operation. It is ideal for working in tight spaces and compatible with PEX, copper, CPVC, PE-RT, and HDPE pipe. No special tools, crimping, glue or soldering is needed and it can be installed in wet lines.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI