SharkBite COMPA1212Z User manual

SharkBite
Brand
SharkBite
Model
COMPA1212Z
Type
User manual

This manual is also suitable for

SharkBite COMPA1212Z is a 1/2 in. Compression (5/8 in. OD) x 1/2 in. Compression angle stop valve. It is typically used on stub-outs coming out of the wall to control and shut off water flow to fixtures or appliances for maintenance and repair. The 1/2 in. compression inlet connection makes for quick installation, and the quarter-turn, full-port brass ball valve makes for easy operation. The sleek chrome finish provides an attractive appearance. It is compatible with copper pipe and can be installed in wet lines.

SharkBite COMPA1212Z is a 1/2 in. Compression (5/8 in. OD) x 1/2 in. Compression angle stop valve. It is typically used on stub-outs coming out of the wall to control and shut off water flow to fixtures or appliances for maintenance and repair. The 1/2 in. compression inlet connection makes for quick installation, and the quarter-turn, full-port brass ball valve makes for easy operation. The sleek chrome finish provides an attractive appearance. It is compatible with copper pipe and can be installed in wet lines.

Description
Typically used on stub-outs coming out of the wall. Used to
control and shut o water ow to xtures or appliances for
maintenance and repair. 1/2 in. compression inlet connection
makes for quick installation, and quarter-turn, full-port brass ball
valve makes for easy operation.
Features And Benets
• Sleek chrome nish for an attractive appearance.
• Quarter-turn full-port brass ball valve.
• Compatible with copper pipe.
• Can be installed in wet lines.
Specication Data
Temperature Performance
• Minimum working temperature 33°F
• Maximum working temperature 160°F
• Maximum working pressure is 125 psi
Flow Rate
• 1/4” Compression 2.2 GPM at 20 psi
• 3/8” Compression 4.0 GPM at 20 psi
Compression Angle Stop
Specication Sheet
US Contact: 1.877.700.4242 • sales@sharkbite.com • sharkbite.com
Canadian Contact 1.888.820.0120 • canadasales@rwc.com • sharkbite.ca
Product Submittal
Name
Date
Architect/Owner
Contractor
Tag
Notes
SS_Compression Angle Stop_04_2020_V01 • Date issued 4/24/20
Materials
Valve body DZR LF Brass
Knurled Handle ABS
Valve ball DZR LF Brass
Seat PTFE
Part Listing
COMPA1214Z 1/2 in. Compression (5/8 in. OD) x 1/4 in. OD Compression
COMPA1238Z 1/2 in. Compression (5/8 in. OD) x 3/8 in. OD Compression
COMPAC1238Z 1/2 in. Coarse Thread Compression (5/8 in. OD) x 3/8 in. OD Compression
COMPA12716Z 1/2 in. Compression (5/8 in. OD) x 1/2 in. OD Slip Joint
COMPA1212Z 1/2 in. Compression (5/8 in. OD) x 1/2 in. Compression
COMPAC1212SZ 1/2 in. Coarse Thread (5/8 in. OD) Compression x 1/2 in. OD Slip Joint
Dimensions
Codes and Listing
cUPC
ASME A112.18.1
CSA B125.1
NSF/ANSI/CAN 61
NSF/ANSI 372
US Contact: 1.877.700.4242 • sales@sharkbite.com • sharkbite.com
Canadian Contact 1.888.820.0120 • canadasales@rwc.com • sharkbite.ca
Part Number DIM A (MM) DIM B (MM)
COMPA1214Z 1.02 2.13
COMPA1238Z 1.14 2.13
COMPAC1238Z 1.14 2.13
COMPA12716Z 1.16 2.13
COMPA1212Z 1.26 2.13
COMPAC1212SZ 1.16 2.13
  • Page 1 1
  • Page 2 2

SharkBite COMPA1212Z User manual

SharkBite
Brand
SharkBite
Model
COMPA1212Z
Type
User manual
This manual is also suitable for

SharkBite COMPA1212Z is a 1/2 in. Compression (5/8 in. OD) x 1/2 in. Compression angle stop valve. It is typically used on stub-outs coming out of the wall to control and shut off water flow to fixtures or appliances for maintenance and repair. The 1/2 in. compression inlet connection makes for quick installation, and the quarter-turn, full-port brass ball valve makes for easy operation. The sleek chrome finish provides an attractive appearance. It is compatible with copper pipe and can be installed in wet lines.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents