Features
•
Brass construction
•
1-1/4″ outside diameter connection
•
Without overflow
•
Decorative trim cap designs
Codes/Standards Applicable
Specified model meets or exceeds the following:
•
ASME A112.18.2/CSA B125.2
DECORATIVE DRAINS
K-7107
ALSO K-7108
K-7108K-7107
Colors/Finishes
•
CP: Polished Chrome
•
Other: Refer to Price Book for additional colors/finishes
Specified Model:
Model Description Colors/Finishes
K-7107 Decorative bathroom sink drain ❑ CP ❑ Other_____
K-7108 Decorative bathroom sink drain ❑ CP ❑ Other_____
PRODUCT SPECIFICATION
Bathroom sink drain without overflow shall be of brass construction. Drain shall feature a 1-1/4″ outside diameter connection
and decorative trim cap designs. Drain shall be Kohler Model K-____-____.
Page 1 of 2
1072757-4-
B
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
Installation Notes
Install this product according to the installation guide.
A thin gasket and a thick gasket are provided with the drain.
Use the thin gasket when installing the drain to bathroom sink
with a thick wall [3-1/2″ (89 mm) maximum thickness], such
as vitreous china or cast iron. Use the thick gasket when
installing the drain to bathroom sink with a thin wall, such as
stainless steel or copper.
K-7108K-7107
1-1/4"
(32 mm) OD
3-13/16"
(97 mm)
8-15/16"
(227 mm)
1-1/4"
(32 mm) OD
3-13/16"
(97 mm)
8-15/16"
(227 mm)
Product Diagram
DECORATIVE DRAINS
Page2of2
1072757-4-
B
/
