Gamber-Johnson Magnetic Redline Light Mount Installation guide

Magnetic Redline Light Mount
Gamber-Johnson
Brand
Gamber-Johnson
Model
Magnetic Redline Light Mount
Type
Installation guide

This manual is also suitable for

Gamber-Johnson Magnetic Redline Light Mount is a versatile and adjustable light mount designed for forklifts. It features powerful magnets for secure attachment to the forklift's overhead guard, ensuring stability and preventing unwanted detachment. The mount comes ready to install and includes all necessary hardware, including safety wire for added security. Easily adjust the mount's magnets for optimal contact with the overhead guard using the provided tools.

Gamber-Johnson Magnetic Redline Light Mount is a versatile and adjustable light mount designed for forklifts. It features powerful magnets for secure attachment to the forklift's overhead guard, ensuring stability and preventing unwanted detachment. The mount comes ready to install and includes all necessary hardware, including safety wire for added security. Easily adjust the mount's magnets for optimal contact with the overhead guard using the provided tools.

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
REV. B
PS-001
a forklift's overhead guard. The safety wire is
5/32” hex key and 3/8" wrench or socket to
secure the safety cable, adjust the magnets,
the overhead guard and reattach the safety wire cap screw.
Printing Spec:
Product Revision Form
and change configurations.
to prevent any injury in the event of an
The Magnetic Redline Light Mount requires
unwanted detachment.
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
INSTALLATION INSTRUCTIONS
The Magnetic Redline Light Mount is designed
as an adjustable light mount to attach to
Forklift Mounting
The Magnetic Redline Light Mount comes ready to install. Using
the 5/32" hex key remove the two redline light cap screws on
the bottom of the bracket. Align the light and attach using the
two redline light cap screws.
Remove the safety wire cap screw. Wrap the safety wire around
INST-734
Magnet Adjustment
Using the 5/32" hex key and the 3/8" wrench or socket, loosen the
magnet adjustment screws. Slide the magnets so they make the
most contact with the overhead guard and tighten the four
adjustment screws.
Screws
7160-0850: MAGNETIC REDLINE LIGHT MOUNT
Safety Wire
Fastener
Light Mounting
Magnets
Safety Wire Loop
Magnet
Adjustment
Screws
Overhead Guard
Safety Wire
Cap Screw
Redline Light
Cap Screws
© copyright 2011 Gamber-Johnson, LLC
Light Mounting
Screws
Safety Wire
Fastener
Thin Bar Bracket
Thin Bar Configuration
The thin bar configuration is used on overhead
guards where the bracket's bottom magnets
can't securly attach.
Using the 5/32" hex key and the 3/8" wrench or
socket remove the bottom three adjustment
screws and magnets. Using the adjustment
screws lightly fasten the magnets to the thin bar
bracket.
Attach the assembled thin bar bracket to the light
bracket by using screws, nuts, and washers from
the hardware bag. Position light mount onto
overhead guard and make any final adjustments
to the magnets and thin bar bracket. Wrap the
safety wire around the overhead guard and
reattach the safety wire cap screw. Finally tighten
and secure all hardware.
NOTE: The thin bar bracket can be configured in
either orientation as shown below depending on
overhead guard thickness.
Choose Orientation
  • Page 1 1
  • Page 2 2

Gamber-Johnson Magnetic Redline Light Mount Installation guide

Magnetic Redline Light Mount
Gamber-Johnson
Brand
Gamber-Johnson
Model
Magnetic Redline Light Mount
Type
Installation guide
This manual is also suitable for

Gamber-Johnson Magnetic Redline Light Mount is a versatile and adjustable light mount designed for forklifts. It features powerful magnets for secure attachment to the forklift's overhead guard, ensuring stability and preventing unwanted detachment. The mount comes ready to install and includes all necessary hardware, including safety wire for added security. Easily adjust the mount's magnets for optimal contact with the overhead guard using the provided tools.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents