Ganz ZN-DNT350VE, ZN-DT350VE, ZN-DWNT350VE Osd Menu Control Manual

  • Hello! I am an AI chatbot trained to assist you with the Ganz ZN-DNT350VE Osd Menu Control Manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ZNDT350VE/ZNDNT350VE/ZNDWNT350VEOSDMenuControlManual
2010/2103A.00 1
ZNDT350VE/ZNDNT350VE/ZNDWNT350VEOSDMenuControlManual
2010/2103A.00 2
Table of Contents
1.ZNDWNT350VE(WDR/TrueDay&Night) ............................................................3
1.1.Menu .................................................................................................................................. 3
1.2.Howtoset .......................................................................................................................... 4
1.2.1.LENS............................................................................................................................. 6
1.2.2.EXPOSURE ................................................................................................................... 7
1.2.3.WhiteBalance ............................................................................................................. 9
1.2.4.BACKLIGHT ................................................................................................................ 10
1.2.5.DNR(DigitalNoiseReduction) .................................................................................. 12
1.2.6.DAY/NIGHT ................................................................................................................ 13
1.2.7.IMAGEADJ................................................................................................................ 14
1.2.8.SPECIAL...................................................................................................................... 16
1.2.9.EXIT............................................................................................................................21
1.3.Specification .................................................................................................................... 22
2.ZNDT350VE(SWDay&Night) ............................................................................. 23
2.1.Menu ................................................................................................................................ 23
2.2.Howtoset ........................................................................................................................ 24
2.2.1.LENS........................................................................................................................... 26
2.2.2.SHUTTER.................................................................................................................... 27
2.2.3.WHITEBALANCE........................................................................................................ 28
2.2.4.BACKLIGHT ................................................................................................................ 29
2.2.5.AGC............................................................................................................................ 30
2.2.6.DNR(DigitalNoiseReduction) .................................................................................. 31
2.2.7.SENSUP(Lowillumination) ...................................................................................... 32
2.2.8.SPECIAL...................................................................................................................... 33
2.3.Specification ..................................................................................................................... 38
ZNDT350VE/ZNDNT350VE/ZNDWNT350VEOSDMenuControlManual
2010/2103A.00 3
1. ZN-DWNT350VE (WDR / True Day & Night)
1.1. Menu
SETUP
LENS DCMANUAL
EXPOSURE
SHUTTERAGCSENSUP
RETURN
WHITEBALANCE
ATWMANUALAWCSET
OUTDOORINDOOR
BACKLIGHT
OFFWDRBLC
HLC
DNR ONOFF
DAY/NIGHT
COLORB/WAUTO
EXTERN
IMAGEADJUSTMENT
FREEZEVREVHREV
DZOOMSHARPNESS
RETURN
SPECIAL
CAMTITLESYNCMOTIONDET
PRIVACYDISCOMMADJ
LANGUAGERESETRETURN
EXIT
ZNDT350VE/ZNDNT350VE/ZNDWNT350VEOSDMenuControlManual
2010/2103A.00 4
1.2. How to set
Settings can be made using the 5 buttons located in the webpage. Go to [Setup]‐[Video &
Audio][Videoinput]andyoucanseethepageofbelow.
1.PresstheSETbutton.
TheSetupmenuisdisplayedonthemonitorscreen.
ClickPREVIEWbuttontopopuptheimageview
ZNDT350VE/ZNDNT350VE/ZNDWNT350VEOSDMenuControlManual
2010/2103A.00 5
2.SelectamenuitemusingtheUpandDownbuttons.
Placethecursoroveradesireditem.
3.SetupaselecteditembyusingtheLeftandRightbuttons.
4.Tofinishandsavethesettings,select'EXIT'andpresstheSETbutton.
NOTE:
Anitem
withthe iconalsohassubmenus.Toselectasubmenu,presstheSETbutton.
Anitemwiththe‐‐‐iconhasnosubmenusavailableforselection.
ZNDT350VE/ZNDNT350VE/ZNDWNT350VEOSDMenuControlManual
2010/2103A.00 6
1.2.1. LENS
Thisfunctionisusedtoadjustthebrightnessofthescreen.
1. When the SETUP menu screen is displayed on the screen, position the cursor to point to
LENSusingtheUpandDownbuttons.
2.SelectthetypeoflensusingtheLeftandRightbuttons.
DC:
SelectAutoIrisLens
When DC is selected, you can control screen brightness. The range of brightness control is
between1and70(40 incaseofWDRmode).Adjustthebrightnessappropriatelyforoptimal
screenbrightness.
NOTE:
Somelensesmaynotworkproperly,dependingonthesettingsfor
theBRIGHTNESSLEVEL.
WhenUsingaVideoTypeAutoIrisLens
CheckthattheALCadjustmentonthelensisappropriate.Ingeneral,setittoAV(Average).
Itmaynotworkproperlydependingontheinstalledlens.SettheLevelVRofthelenstothe
optimalvalue.
SetAGC/SENSUPtoOFFandadjusttheLensVRtoanappropriatebrightness.
Adjust the Lens VR, adjust the BRIGHTNESS, and then check if the screen brightness
changesproperly.Otherwise,adjusttheLensVRagain.
Manual:SelectManualLens
ZNDT350VE/ZNDNT350VE/ZNDWNT350VEOSDMenuControlManual
2010/2103A.00 7
1.2.2. EXPOSURE
1.WhentheSETUPmenuscreenisdisplayedselectEXPOSUREusingtheUpandDownbuttons.
2.SelectthedesiredmodeusingtheLeftandRightbuttons.
SHUTTER:Selecteitherautoormanualshutter.
‐A.FLK:Selectthiswhenpictureflickerisexperienced,whichcanhappenwhen
thereisacl ash
withthefrequencyoftheinstalledlighting.
‐ ESC : Select this to control the shutter speed automatically. If ESC is selected, the shutter
speedisautomaticallycontrolledaccordingtotheambientilluminationavailable.
‐MANUAL:Theshutterspeediscontrolledmanually.
NOTE:
To
producebetterresultswithA.FLK,donotuseitinconjunctionwiththeWDRmodeonthe
BACKLIGHTmenu.
When the SHUTTER is set to ESC, and the camera is set to Internal Synchronization, the
picture may become unstable if the camera faces a bright fluorescent light. Therefore, take
carewhenchoosingtheinstallationposition.
ESCandMANUALmodesareonlyavailabletogetherwhen thelensissettoMANUAL.
WhentheSHUTTERissettoMANUALorA.FLKmode,SENSUPisdisabled.
AGC(AUTOGAINCONTROL):
Thehigherthegainlevel,thebrighterthescreen
‐butthehigherthenoise.
‐OFF:DeactivatestheAGCfunction.
‐LOW:Allowsautomaticgaincontrolfrom0to24dB.
‐HIGH:Allowsautomaticgaincontrol from0to42dB.
ZNDT350VE/ZNDNT350VE/ZNDWNT350VEOSDMenuControlManual
2010/2103A.00 8
SENSUP:
Whenitisnightordark,thecameraautomaticallydetectsthelightlevelandmaintainsaclear
pictureifthismodeisa ctivated.
‐OFF:DeactivatestheSENSUPfunction.
‐AUTO:ActivatestheSENSUPfunction.
RETURN:
Selectthistosave
thechangesintheEXPOSUREmenuandreturntotheSETUPmenu.
NOTE:
If you press the SET button in 'AUTO' mode, You can adjust brightness by increasing or
decreasingtheshutterspeed.(X2~X256)
Notethatthehigherthezoom level,thebrighterthescreen,butthemore
likelyitisthatan
afterimagewillappear.
Although Noise, Spots, and Whitish symptoms may occur in SENSUP operation when the
zoomlevelisincreased,thisisnormal.
ZNDT350VE/ZNDNT350VE/ZNDWNT350VEOSDMenuControlManual
2010/2103A.00 9
1.2.3. White Balance
UsetheWhiteBalancefunctiontoadjustthescreencolors.
1.Position the cursor to point to WHITEBAL on the SETUP menu screen,select using the Up
andDownbuttons.
2.SelectadesiredmodeusingtheUpandDownbuttons.
Selectoneofthefollowing5modes,as
appropriate.
ATW:Selectwhenthecolortemperatureisbetween1800°Kand10500°K
INDOOR:Selectwhenthecolortemperatureisbetween4500°Kand8500°K
OUTDOOR : Select when the color temperature is between 1 800°K and 10500°K. (sodium
lightinclusion)
AWC SET : To obtain the
optimum state under the current luminance levels, direct the
camerato point towarda sheetof whitepaperandpresstheSETbutton. If theenvironment
changes,includingthelightsource,thewhitebalancewillrequirereadjustment.
MANUAL : Select to "finetune" the White Balance manually. Set White
Balance first using
theATWorAWCmode.AfterwardsswitchtoMANUALmode,finetunetheWhiteBalancean d
thenpresstheSETbutton.
NOTE:
Under the following conditions White Balancemaynotwork properly. In suchcases, select
theAWCmode.
Whenthecolortemperature
ofthesubjectenvironmenthasaveryhigh temperaturerange
(e.g.Clearskyorsunset)
Whentheambientillumination ofthesubjectislow.
If the camera is directed toward a fluorescent light, or is installed in a place where
illuminationchangesdramatically,theWhiteBalanceoperationmaybecomeunstable.
ZNDT350VE/ZNDNT350VE/ZNDWNT350VEOSDMenuControlManual
2010/2103A.00 10
1.2.4. BACKLIGHT
Thiscameraisdesignedtodeliveraclearanddistinct imageofbothsubjectandbackground,
evenwhenthesubjectisbacklit.
1. Position the cursor to point to BACKLIGHT on the SETUP menu screen using the Up and
Downbuttons.
2.SelectthedesiredmodeusingtheLeftandRightbuttons.
WDR:Whentheimagehassimultaneousbrightanddarkareas,the
WideDynamicRangemakesbothareasdistinct.
OFF:DeactivatestheWDRfunction.
BLC:Enablestheusertodirectlyselectanareaof
apicturetoactivateandcontrol.
HLC(HighLightCompensation):
Ifthereisahighlightinstalled inalimitedenvironmentsuchasanapartment parkinggarage
or gas station entrance, removing the high light makes it possible to view car license plates
efficiently.
‐DAY:Innormal
daylightconditions,theHLCisnotactivated.
‐NIGHT:Ifa highlightthat islarger thana certainsizeispresenton thescreen, removethe
highlighttoseelicenseplatesclearly.
ZNDT350VE/ZNDNT350VE/ZNDWNT350VEOSDMenuControlManual
2010/2103A.00 11
3.SelectthedesiredmodeusingtheLeftandRightbuttonsandpresstheSETbutton.
NOTE:
The WDR cannot be used when MANUAL mode or A.FLK mode in the 'SHUTTER' menu is
selected.
IfthefollowingsymptomsoccurwhenWDRisselected,deactivateit.
Colorofscreenchangesunnaturally.
Noiseappearsinthebrightestpartofthescreen.
As the performance of the WDR function can be affected by an area of brightness on the
image,optimizetheinstallationangletoeliminateanybrightspotsforthebestperformance.
IfLIMIT
isincreased,theimagemaybecomedistorted.
ForthebestWDRperformanceuseaDCIrisLensratherthanaManualLens.
Select 'WDR' to adjust the WDR
LIMIT. Select LOW, MIDDLE, or
HIGH.
Select 'BLC' to adjust the area to be
enhancedbytheWDRfunction.
ZNDT350VE/ZNDNT350VE/ZNDWNT350VEOSDMenuControlManual
2010/2103A.00 12
1.2.5. DNR (Digital Noise Reduction)
Thisfunctionreducesthebackgroundnoiseinalowluminanceenvironment.
1. WhentheSETUPmenuscreenisdisplayed,select'DNR'usingtheUpandDownbuttons.
2.SelectadesiredmodeusingtheLeftandRightbuttons.
OFF:DeactivatesDNR.Noiseisnotreduced.
ON:Activates
DNRsothatnoiseisreduced.
3.SettheDNRmod e to'ON'andpresstheSETbutton.Thenoisereductionlevelcan nowbe
adjusted.
NOTE:
YoucannotsettheDNRto'ON'or'OFF'whentheAGCmodeintheEXPOSUREmenuis'OFF'.
WhenadjustingthenoisereductionlevelinDNRmode,rememberthatthehigherthelevelis
set,thegreaterthereductioninnoiselevel,butitalsoincreasesthepossibilityofghosting.
ZNDT350VE/ZNDNT350VE/ZNDWNT350VEOSDMenuControlManual
2010/2103A.00 13
1.2.6. DAY/NIGHT
Picturescanbedisplayedineithercolororblackandwhite.
1. When the SETUP menu screen is displayed, select 'DAY/NIGHT' using the Up and Down
buttons.
2.SelectthedesiredmodeusingtheLeftandRightbuttons.
COLOR:Thepictureisdisplayedincolor.
B/W:
Thepictureisalwaysdisplayedinblackandwhite.
AUTO:ThiscamerahasanIRCutFilterandautomaticallychangestotheappropriatemode
according to lighting levels. To set up the switching time and switching speed for the AUTO
modepresstheSETbutton.
EXTERN:
Thismodeallowstheapplicationofafiltertoexternalsignals.
ZNDT350VE/ZNDNT350VE/ZNDWNT350VEOSDMenuControlManual
2010/2103A.00 14
1.2.7. IMAGE ADJ.
1. When the SETUP menu screen is displayed, select 'IMAGE ADJ.' using the Up and Down
buttons.
2.SelectthedesiredmodeusingtheLeftandRightbuttons.
FREEZE:Viewandcaptureastillimage.
VREV:Flipsthepictureverticallyonthescreen.
HREV:Flipsthepicturehorizontallyonthescreen.
DZOOM:Digitallyzooms,therangeisx1~x10.
SHARPNESS:Asthisvalueisincreasedthepictureoutlinebecomesstrongerandclearer.
ZNDT350VE/ZNDNT350VE/ZNDWNT350VEOSDMenuControlManual
2010/2103A.00 15
RETURN : Select this to save the settings for the IMAGE ADJ. menu and to return to the
SETUPmenu.
Note:
WhenHREVorVREVisselected,anytextinthepicturealso willbeflippedhorizontallyor
vertically.
IftheSHARPNESSlevelis
increasedtoohighthe picturemaybecomedistorted,ornoisemay
generated.
ZNDT350VE/ZNDNT350VE/ZNDWNT350VEOSDMenuControlManual
2010/2103A.00 16
1.2.8. SPECIAL
1.WhentheSETUPmenuscreenisdisplayed,select'SPECIAL'usingthe
UpandDownbuttons.
2.SelectthedesiredmodeusingtheLeftandRightbuttons.
CAMTITLE:Ifatitleisentered,thetitleappearsonthemonitor.
When the SPECIAL menu screen is displayed, use the Up and Down buttons to point the
cursorto'CAMTITLE'.
Setto'ON'usingtheLeftandRightbuttons.
NOTE:
WhentheCAMTITLE
menuis'OFF',notitlewillbedisplayedonthemonitorscreenevenifone
hasbeenentered.
ZNDT350VE/ZNDNT350VE/ZNDWNT350VEOSDMenuControlManual
2010/2103A.00 17
PresstheSETbutton.
Use the 4 directional buttons to move to a character, and select it by pressing the SET
button.Repeatthisactiontoentermultiplecharacters.Upto15alphanumericcharacterscan
beused.
If the cursor is moved to CLR and the SET
button pressed, allletters are deleted. To edit a
letter,changethecursortothebottomleftarrowandpresstheSETbutton.Movethecursor
over the letter to be edited, move the cursor to the letter to be inserted and then press the
SETbutton.
Enteratitl e,
movethecursorto'POS'andpresstheSETbutton.Theenteredtitleappears
on the screen. Select the position to display the title on the screen using the 4 directional
buttonsandpresstheSETbutton.Whenthepositionisdetermined,select'END'andpressthe
SETbuttonto
returntotheSPECIALmenu.
SYNC:Inareaswherethesupplyis60Hz,multiplecamerasusingthepowersynchronization
function(LineLock),withoutusingasynchronizationsignalgenerator.
‐INT:InternalSynchronizationType
‐L/L:PowerSynchronizationType,Linelock
PresstheSETbutton.
Selectaphasebetween0and359.
ZNDT350VE/ZNDNT350VE/ZNDWNT350VEOSDMenuControlManual
2010/2103A.00 18
NOTE:
WhenusingACpowerata60HzfrequencyLineLocksynchronizationcanbeused.
WhenthepowerisDC12V,theSYNC.menuisfixedtothe'INT'mode.
MOTIONDET:
Thiscameradisplaysanonscreenmessagewhenevermotionisdetected.
When the
SPECIAL menu screen is displayed, press the Up and Down buttons so that the
cursorpointstoMOTIONDET.
Setupthefunctionusingthe4directionalbuttons.
‐ SENSITIVITY : Select up to eight MD areas. When the SENSITIVITY value is high, motion
detectionsensitivityisincreasedtorecognize
smallmovements.
‐AREAMODE:DetermineswhethertousetheMDareaselectedinSENSITIVITY.
‐SELPOS:Determineswhichofthe4verticesofeachMDareaistobeused.
‐YPOS:Determinesthecoordinates oftheverticalaxisforSELPOS.
‐XPOS:Determinesthe
coordinatesofthehorizontalaxisforSELPOS.
‐ FILL SET : Fills in a selected MD area. Fill in a selected MD area. The color of filling is
sequentiallyselectedasbrown,orange,blue,cyan,ye llowishgreen,yellowandred.
‐RETURN:SelectthistosavetheMOTION
DETmenusettingsandreturntotheSPECIALmenu.
NOTE:
MDareas show onlyon the MOTION DET menu. Therefore,MDareas are notdisplayedon
themonitorscreen.
PRIVACY:Hideanareasothatitisnotdisplayedonthemonitor.
ZNDT350VE/ZNDNT350VE/ZNDWNT350VEOSDMenuControlManual
2010/2103A.00 19
‐MASKCOLOR:Determineareacolor.SelectGrey,Green,Red,Blue,BlackorWhite.
‐TRANSP:Determinethetransparencyoftheselectedarea,therangeisfrom0to3.
‐RETURN:SelectthistosavethePRIVACYmenusettingsandreturntotheSPECIALmenu.
DIS(Digital
ImageStabilizer):
Thisfunctionmitigatespicturemovementcausedbyexternalfactors,suchaswind.
COMMADJ(CommunicationAdjustment) :
Thisfunctionsetsupthe cameracommunication statuswhencontrollingthecamerathro ugh
anexternaldevice.
When the SPECIAL menu screenis displayed, press the UpandDown
buttons so that the
cursorpointsto'COMMADJ'.
Setupthemodeusingthe4directionbuttons.
‐CAMID:Determinesthecamera'side ntificationnumber(between0and255).
‐BAUDRATE:Select2400/4800/9600/19200/38400/57600bps.
‐UARTMODE:SelectNONE,EVENorODDfortheparitybits.
‐
RET PKT : Determines whether to send a command back to the controller device when a
communicationcontrolcommandissenttothecamera.
When the SPECIAL menu screen is
displayed, press the Up and Down
buttons so that the cursor points to
'PRIVACY'.
Setupusingthe4directionalbuttons.
‐AREASEL:Upto8areasareselectable.
‐AREAMODE:Determineswhethertouse
theareaselected inthe
AREASEL,and the
sizeandpositionofthearea.
ZNDT350VE/ZNDNT350VE/ZNDWNT350VEOSDMenuControlManual
2010/2103A.00 20
‐DISPCAMID:Displaythecameratitleonthetopleftcornerofthescreen.
LANGUAGE:Selecttheappropriatemenulanguage.
RESET:Resetsthecamerasettingstothefactorydefaults.
RETURN:SelectthistosavetheSPECIALmenusettingsandreturntothe
SPECIALmenu.
/