CONCORD Eye-Q 3042 AF FAQ

Brand: CONCORD

Model: Eye-Q 3042 AF

Type: FAQ

Concord Eye-Q 3042 AF

I am having difficulties installing the camera driver and software. What Should

I do?

If you encounter this issue, please uninstall the driver completely and restart you

computer. Please reinstall the driver again. It's recommended you download the latest

driver version from our website http://www.concord-

camera.com/support/downloads/downloads.htm.

There are two ways to uninstall drivers or software completely:

1.Uninstall the driver or software from Programs:

& From the Start button, click Programs and choose the camera model software and

driver.

& From the camera software folder, select the Uninstall Wizard. When asked if you

want to completely remove the program from your computer, answer Yes. A

message stating that the program was successfully removed is displayed.

& Click Start > Shut Down.

When the Shut Down dialog box is displayed, choose Restart.

& Click OK to restart your computer.

2. Uninstall the driver or software from the Control Panel:

& From the Start button, click Settings > Control Panel.

& Double-click Add/Remove Programs.

& Highlight the desired software and click the Change/Remove button.

& Proceed to the next step following the on-screen instructions.

& Click Start > Shut Down.

When the Shut Down dialog box is displayed, choose Restart. Click OK to restart

your computer.

Does my camera have an audio function?

This camera does not offer an audio function.

Can I use my camera as a web camera?

This camera was not designed for use as a web camera.

Concord Eye-Q 3042AF

After taking a picture or two, my camera suddenly turns off. Is there something

wrong with it?

There is nothing wrong with your camera. The camera has a built-in power saving

feature that turns the camera off after more than 2 minutes of inactivity (default

setting) to conserve battery power. The auto off time setting can be changed in the set

up menu.

Changing the Auto off Time Setting:

1. Set the camera to Camera Mode.

2. Press the Menu button to display the main menu.

3. Press until the Setup is highlighted.

4. Press to enter the Setup submenu.

5. In the Setup menu, press to highlight “Auto Off Time”.

6. Press to enter “Auto Off Time”. Press to highlight the time you want.

7. Press the OK button to save your selection.

My camera does not recognize the Secure Digital (SD) card. What can I do?

Please make sure that the card is completely inserted into the Secure Digital card slot.

If you have difficulties inserting the card completely, you may have inserted the card

incorrectly. Please reverse the position of the card and reinsert the card. If you

continue to have difficulties, your card may be corrupted. This can happen if a card is

used in more than one digital camera. Not to worry. This can be easily fixed by re-

formatting the card. Please remember that in formatting the card, all pictures and

videos will be erased, including those that may be protected.

CONCORD Eye-Q 3042 AF FAQ

CONCORD Eye-Q 3042 AF FAQ

Related papers

Other documents