AirLink
®
LS300 Quick Start Guide
Page 1
© 2013 Sierra Wireless All Rights Reserved PN 2400272 Rev. 1
This guide provides instructions for quickly getting your Sierra Wireless
®
LS300 device con gured and connected.
For more information refer to the:
• AirLink LS300 User Guide
• ALEOS
™
Con guration User Guide
Both are available for download from the Sierra Wireless web site (www.sierrawireless.com/Support/Downloads).
1 Remove the rear panel access cover.
2 Slide the SIM card into the SIM card holder.
Note the location of the notched corner for correct alignment.
3 Re-attach the cover.
STEP 1 Install the SIM Card (Does Not Apply to CDMA Devices)
STEP 2 Connect and Turn On the Device
1 Connect the RF antenna.
2 If required, connect the GPS and/or the diversity antenna (recommended).
3 If required by your application,
connect the RS-232 port and/or the
USB port.
4 Connect a Windows
®
computer to the device with an Ethernet cable.
5 Connect the power cable to the device.
The device starts automatically, as indicated by the ashing LEDs.
NOTE: If you want to con gure all your devices at the same time using AirVantage
®
Management Service, follow the instructions on page 2 to
register your devices before applying power.
AirLink
®
LS300 Quick Start Guide
AirLink Support
suppor[email protected]
AirLink Online Support Knowledgebase
www.sierrawireless.com/Support/SupportCenter
AirLink Software Downloads
www.sierrawireless.com/Support/Downloads
Sierra Wireless Contact Information
Sierra Wireless Headquarters
13811 Wireless Way, Richmond, BC, Canada, V6V 3A4
Main Phone: +1-604-231-1100 (8am to 5pm Paci c time)
Page 2
AirVantage Management Service Sales
AirVantageSales@sierrawireless.com
AirLink Hardware Sales
Connect to ACEmanager
™
Connect to AirVantage Management Service
1 On a Windows computer connected to the LS300, enter http://192.168 .13.31: 9191 in the web browser.
The ACEmanager login screen appears.
NOTE: It may take the device 2 – 3 minutes to respond after the initial power up.
2 The administrator user name, user, is entered by default. Enter the default password 12345.
3 The ACEmanager homepage appears. You can now con gure each device with ACEmanager.
Refer to the ALEOS Con guration User Guide for detailed information.
1 Using a web browser, log into your AirVantage Management Service account.
If you don’t have an AirVantage account, you can get a free trial account at
https://airvantage.net.
2 If you have not already done so, register your devices by following the instructions on the registration page.
3 Apply power to all your devices. AirVantage Management Service completes the registration at the next device
check in (default device check in is every 24 hours).
4 You can remotely con gure and monitor all your devices at the same time using AirVantage Management Service.
© 2013 Sierra Wireless All Rights Reserved PN 2400272 Rev. 1
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Sierra Wireless LS300 Hardware User's Manual
-
-
-
-
Sierra Wireless AirLink GX440 User manual
-
Sierra Wireless AirLink GX400 Hardware User's Manual
-
Sierra LS300 User manual
-
-
-