Kreator KRT706500 Owner's manual

Brand: Kreator

Model: KRT706500

Category: Distance meters

Type: Owner's manual

Kreator KRT706500 is a digital laser rangefinder designed for measuring distances, lengths, heights, and clearances. It also calculates areas and volumes, making it suitable for various projects, including home improvement, construction, and carpentry. With its user-friendly interface and precise measurements, the Kreator KRT706500 is an excellent tool for both professionals and DIY enthusiasts.

  KRT706500  EN 
Copyright © 2019 VARO  P a g e  | 1  www.varo.com 
APPLICATION .................................................................................. 3 
DESCRIPTION FIG. 1 ...................................................................... 3 
PACKAGE CONTENT LIST ............................................................. 3 
SYMBOLS ........................................................................................ 3 
GENERAL POWER TOOL SAFETY WARNINGS .......................... 3 
1  Work area ................................................................................................................ 3 
2  Electrical safety ....................................................................................................... 4 
3  Personal safety ....................................................................................................... 4 
4  Power tool use and care ......................................................................................... 4 
5  Service ..................................................................................................................... 5 
ADDITIONAL SAFETY INSTRUCTIONS FOR LASERS ................ 5 
ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES .......... 5 
SETTINGS AND OPERATIONS ...................................................... 5 
1  Buttons and their functions .................................................................................... 5 
2  LCD instructions Fig 2 ............................................................................................ 6 
3  Attention points ...................................................................................................... 6 
4  Inserting/Replacing the batteries ........................................................................... 6 
5  Initial operation ....................................................................................................... 6 
6  Switching on and off ............................................................................................... 6 
7  Measuring procedure .............................................................................................. 6 
8  Single distance measurement ................................................................................ 7 
9  Continuous measurement ...................................................................................... 7 
10  Pythagorean theorem measurement...................................................................... 7 
11  Dual Pythagorean theorem measurement ............................................................. 7 
12  Area measurement .................................................................................................. 7 
13  Volume measurement ............................................................................................. 8 
14  Addition measurement ........................................................................................... 8 
15  Subtraction measurement ...................................................................................... 8 
16  Message code ......................................................................................................... 8 
MAINTENANCE AND STORAGE .................................................... 8 

KRT706500 EN

10 TROUBLE SHOOTING .................................................................... 9

11 TECHNICAL DATA .......................................................................... 9

12 SERVICE .......................................................................................... 9

13 ENVIRONMENT ............................................................................... 9

14 DECLARATION OF CONFORMITY .............................................. 10

KRT706500 EN

DIGITAL LASER RANGEFINDER

KRT706500

1 APPLICATION

The measuring tool is intended for measuring distances, lengths, heights, clearances, and for

the calculation of areas and volumes. The measuring tool is suitable for measuring indoors

and outdoors.

WARNING! Read this manual and general safety instructions carefully

before using the appliance, for your own safety. Your power tool should

only be passed on together with these instructions.

2 DESCRIPTION FIG. 1

1. Measuring and On button

2. Function button

3. Off button

4. Battery lid

5. Laser beam outlet

6. Screw thread for tripod

7. Display

3 PACKAGE CONTENT LIST

▪ Remove all packing materials

▪ Remove remaining packaging and transit supports (if existing)

▪ Check the completeness of the packing content

▪ Check the appliance, the power cord, the power plug and all accessories for transportation

damages.

▪ Keep the packaging materials as far as possible till the end of the warranty period.

Dispose it into your local waste disposal system afterwards.

WARNING Packing materials are no toys! Children must not play with

plastic bags! Danger of suffocation!

1 x Digital Laser Rangefinder 2 x 1.5V AAA batteries

When parts are missing or damaged, please contact your dealer.

4 SYMBOLS

In this manual and/or on the machine the following symbols are used:

Warning / Danger

Attention Laser radiation! Do not

look into the beam. Laser class 2

Read manual before usage

In accordance with essential

requirements of the European

directive(s)

5 GENERAL POWER TOOL SAFETY WARNINGS

Read all safety warnings and all instructions. Failure to follow all warnings and instructions

may result in electric shock, fire and/or serious injury. Save all warnings and instructions for

future reference. The term "power tool" in the warnings refers to your mains operated (corded)

power tool or battery operated (cordless) power tool.

5.1 Work area

KRT706500 EN

▪ Keep work area clean and well lit. Cluttered and dark areas invite accidents.

▪ Do not operate power tools in explosive atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or

fumes.

▪ Keep children and bystanders away while operating a power tool. Distractions can cause

you to lose control.

5.2 Electrical safety

▪ Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching

outlets will reduce risk of electric shock.

▪ Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges

and refrigerators. There is an increased risk of electric shock if your body is earthed or

grounded.

▪ Do not expose power tools to rain or wet conditions. Water entering a power tool will

increase the risk of electric shock.

▪ Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power

tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled

cords increase the risk of electric shock.

▪ When operating a power tool outdoors, use an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces the risk of electric shock.

▪ If operating a power tool in a damp location is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces the risk of electric shock.

5.3 Personal safety

▪ Stay alert, watch what you are doing and use common sense when operating a power

tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or

medication. A moment of inattention while operating power tools may result in serious

personal injury.

▪ Use safety equipment. Always wear eye protection. Safety equipment such as dust mask,

non-skid safety shoes, hard hat, or hearing protection used whenever conditions require

will reduce personal injuries.

▪ Avoid accidental starting. Ensure the switch is in the off position before plugging in.

Carrying power tools with your finger on the switch or plugging in power tools that have

the switch on invites accidents.

▪ Remove any adjusting key or wrench before turning the power tool on. A wrench or a key

left attached to a rotating part of the power tool may result in personal injury.

▪ Do not overreach. Keep proper footing and balance at all times. This enables better

control of the power tool in unexpected situations.

▪ Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and

gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in

moving parts.

▪ If devices are provided for the connection of dust extraction and collection facilities, ensure

these are connected and properly used. Use of these devices can reduce dust related

hazards.

5.4 Power tool use and care

▪ Do not force the power tool. Use the correct power tool for your application. The correct

power tool will do the job better and safer at the rate for which it was designed.

▪ Do not use the power tool if the switch does not turn it on and off. Any power tool that

cannot be controlled with the switch is dangerous and must be repaired.

▪ Disconnect the plug from the power source before making any adjustments, changing

accessories, or storing power tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

KRT706500 EN

▪ Store idle power tools out of the reach of children and do not allow persons unfamiliar with

the power tool or these instructions to operate the power tool. Power tools are dangerous

in the hands of untrained users.

▪ Maintain power tools. Check for misalignment or sticking of moving parts, breakage of

parts and any other condition that may affect the power tool’s operation. If damaged, have

the power tool repaired before use. Many accidents are caused by poorly maintained

power tools.

▪ Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting

edges are less likely to stick and are easier to control.

▪ Use the power tool, accessories and tool bits etc., in accordance with these instructions

and in the manner intended for the particular type of power tool, taking into account the

working conditions and the work to be performed. Use of the power tool for operations

different from intended could lead to a hazardous situation.

5.5 Service

▪ Have your power tool serviced by a qualified repair person using only identical

replacement parts. This will ensure that the safety of the power tool is maintained.

6 ADDITIONAL SAFETY INSTRUCTIONS FOR LASERS

▪ Warning! The laser beam potentially causes severe eye damage. Never look or stare

directly into the laser beam.

▪ During use, do not point the laser beam at people, directly or indirectly through reflecting

surfaces.

▪ This laser complies with class 2 according to EN 60825-1:2001. The unit includes no

servicing components. Do not open the housing for any reason. If the unit is damaged,

have the damage repaired by an authorized repair agent.

▪ Do not use on surfaces such as sheet steel that have shiny, reflective surfaces. The

reflective surface could reflect the beam back at the operator.

7 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES

▪ When replacing batteries, always replace the complete set. Do not mix old batteries with

new ones.

▪ Prevent removed batteries from short circuiting.

▪ Do not store batteries where the temperature may rise above 50 °C, e.g. in a car which

has been parked in the sun.

▪ Do not burn batteries.

▪ Never attempt to open batteries.

▪ In case of battery leakage, carefully remove the liquid using a cloth. Avoid skin or eye

contact. Do not swallow. In case of skin or eye contact, rinse abundantly for 10 minutes

with clean water and consult a physician.

8 SETTINGS AND OPERATIONS

8.1 Buttons and their functions

▪ Button 1: turn on button / measuring button.

Use a long press to turn on the device. Use a short press to turn on the laser.

Use a short press for single measurement and a long press for continued measurement.

▪ Button 2: function button.

Use a short press for area measurement (A), volume measurement (B), addition

measurement (+) and subtraction measurement (-).

▪ Button 3: turn off button / change measurement datum button

Use a short press to change measurement datum. Use a long press to turn the device off.

KRT706500 EN

8.2 LCD instructions Fig 2

▪ Low battery (C)

▪ Measuring datum starting from rangefinder tail (D)

▪ Measuring datum starting from rangefinder head (E)

▪ Measuring datum starting from rangefinder ¼ copper nut Center (G)

▪ Laser on indicator (F)

▪ Area measurement (A)

▪ Volume measurement (B)

▪ Pythagorean theorem measurement (H)

▪ Dual Pythagorean theorem measurement (I)

8.3 Attention points

▪ Don’t point this instrument to the sun or other intense light sources, as it will cause your

measurements erroneous or inaccurate.

▪ Don’t use the instrument in damp, dusty and other harsh environments. Long time

exposure to adverse environments will damage internal components of this laser

rangefinder or result in inaccurate measurements.

▪ When this instrument is brought from one environment to another environment whose

ambient temperature defers greatly from the previous one, it can be only when it has

roughly the same temperature with the ambient one.

▪ This instrument may have errors when measuring some light colored liquids, transparent

glass panes, polystyrene foams or low-density objects.

▪ The highly reflective surface of any object to be measured will skew the laser beam and

then result in an erroneous measurement.

▪ A highly luminous environment, in combination with a measurement surface of low

reflection effect will shorten the measuring range and reduce the measurement accuracy.

8.4 Inserting/Replacing the batteries

Alkali-manganese batteries are recommended for the measuring tool. To open the battery lid

4, press on the latch and fold the battery lid up. Insert the batteries. When inserting, pay

attention to the correct polarity according to the representation on the inside of the battery

compartment.

8.5 Initial operation

▪ Protect the measuring tool against moisture and direct sun light.

▪ Do not subject the measuring tool to extreme temperatures or variations in temperature.

As an example, do not leave it in vehicles for longer periods. In case of large variations in

temperature, allow the measuring tool to adjust to the ambient temperature before putting

it into operation. In case of extreme temperatures or variations in temperature, the

accuracy of the measuring tool can be impaired.

▪ Avoid heavy impact to or falling down of the measuring tool. Damage to the measuring

tool can impair its accuracy. After heavy impact or shock, compare the laser lines with a

known horizontal or vertical reference line.

8.6 Switching on and off

▪ Press the on button (1) to turn on the device. The tool will default to the single-distance

measuring mode.

▪ Press about 3 seconds on the off button (3) to turn off the device.

▪ When the measuring tool is inactive for 5 minutes, it will automatically turn off to save

battery power.

8.7 Measuring procedure

▪ Hold the tool at the point from which you want to measure. Press button 1 to turn on the

laser.

KRT706500 EN

▪ The laser is aimed at the object to be measured. Press button 1 again to take a

measurement.

▪ To change the measuring unit, press 3 seconds on function key (2). You can choose

between inch, feet and meter.

▪ Note: the laser will switch off after 20 seconds of inactivity. Press on the on button (1)

again to turn device back on.

WARNING: Do not point the laser beam at persons or animals and do not

look into the laser beam yourself, not even from a large distance.

8.8 Single distance measurement

▪ Press the on button (1) to turn on the device. The tool will default to the single-distance

measuring mode.

▪ Press button 1 again to turn on the laser, the laser indicator will blink. Aim the laser at the

target you want to measure.

▪ Press button 1 again to take a measurement.

8.9 Continuous measurement

▪ The continuous measurement function is used for transferring measurements, e.g., form

construction plans. In the continuous measurement mode the measuring tool can be

moved relative to the target and the measured value is updated.

▪ Press button 1 a couple of seconds to enter the continuous measurement mode.

▪ Press button 1 again to measure operation. The measurement results will be displayed at

the most downtrend of the display screen.

8.10 Pythagorean theorem measurement

▪ Press button 2 to one time enter Pythagorean measurement mode. The Pythagorean

theorem icon (H) will be displayed.

▪ The hypotenuse that needs to be measured will start flashing. Press measuring key (1) to

shoot the laser and press again to measure the length of the hypotenuse. The length

value of the hypotenuse will be displayed on the screen.

▪ Another right angle that needs to be measured will start flashing. Press measuring key (1)

to measure the length of the right angle. The length value of the right-angle side will be

displayed in the middle row of the display screen.

▪ The length value of the side that needs to be measured will automatically be displayed in

the bottom row of the display screen.

8.11 Dual Pythagorean theorem measurement

▪ Press button 2 two times to enter dual Pythagorean measurement mode. The dual

Pythagorean theorem icon (I) will be displayed.

▪ One side of a triangle that needs to be measured will start flashing. Press measuring key

(1) to shoot the laser and press again to measure the length of the side. The length value

of the side will be displayed on the screen.

▪ Next, the vertical side that needs to be measured will start flashing. Press measuring key

(1) to measure the length of the vertical side. The length value of the right-angle side will

be displayed in the middle row of the display screen.

▪ The other side of the triangle will start to flash. Press measuring key (1) to measure this

side. The length value of the side that needs to be measured will automatically be

displayed at the bottom row of the display screen.

8.12 Area measurement

▪ Press button 2 three times to enter area measurement mode. The area icon (A) will be

displayed.

KRT706500 EN

▪ Press button 1 again to measure the length and press button 1 again to measure the width

of the rectangle. The measurement area will be displayed at the most downtrend of the

display screen.

8.13 Volume measurement

▪ Press button 2 four times to enter volume measurement mode. The volume icon (B) will be

displayed.

▪ Press button 1 again to measure the length, press button 1 again to measure the width

and press button 1 again to measure the height of the cube. The measurement volume will

be displayed at the most downtrend of the display screen.

8.14 Addition measurement

▪ Press button 2 five times to enter addition operation measurement mode. The addition

icon (+) will be displayed.

▪ Press button 1 again to make a single measurement, continue to make a single

measurement. The cumulative value of the two measurements will be displayed at the

most downtrend of the display screen. Keep doing as many single measurements as

needed.

▪ The measurements of n times have always been cumulative and displayed on the most

downtrend of the display screen.

8.15 Subtraction measurement

▪ Press button 2 six times to enter subtraction operation measurement mode. The

subtraction icon (-) will be displayed.

▪ Press button 1 again to make a single measurement, continue to make a single

measurement. The cumulative value of the two measurements will be displayed at the

most downtrend of the display screen. Keep doing as many single measurements as

needed.

▪ The measurements of n times have always been cumulative and displayed on the most

downtrend of the display screen.

8.16 Message code

Message code

Possible Cause

Remedy

Err01

The reflected laser signal is

too strong.

Change the target or affix a

piece of white paper to the

target.

Err02

The distance to be measured

is beyond the measuring

range. The specified

measuring range of this

instrument is 0.05~20m

Measure within the effective

measuring range.

Err03

The target which the laser

beam aims at is weak at

reflecting the laser beam.

Change the target or affix a

piece of white paper to the

target.

Err06

Low battery

Replace with a new battery

9 MAINTENANCE AND STORAGE

▪ Check the measuring tool each time before use. In case of visible damage or loose

components inside the measuring tool, safe function can no longer be ensured.

▪ Keep the measuring tool clean and dry at all times to ensure proper and safe working.

▪ Wipe off debris using a moist and soft cloth. Do not use any cleaning agents or solvents.

KRT706500 EN

10 TROUBLE SHOOTING

Problem

Causes

Solutions

The instrument can’t be

turned on

Battery is incorrectly wired

Low battery

Poor contact of the ON

button

Reload the battery according

polarity symbols indicated

inside the battery

compartment

Replace with a new battery

Try to press the button hard

or send it for repair

The device clicks inside

It is a normal phenomenon

and generated by light path

switchover during

measurement

N/A

The screens displays an

error code

Please refer to the error

message section

Please refer to the error

message section

11 TECHNICAL DATA

Type

KRT706500

Measuring range

0.05-20m

Measuring accuracy (typically)

±2 mm

Operating temperature

-10-40 °C

Laser class

Laser type

635nm, <1mW

Batteries

2 x 1.5 V (AAA)

Operating life time, approx.

– Individual measurements

5000

12 SERVICE

▪ Repairs may only be carried out by an authorized customer service centre for KREATOR

tools.

▪ You can always obtain more information at the number 00 32 3 292 92 90.

▪ Any transportation costs shall always be borne by the customer, unless agreed otherwise

in writing.

▪ Your purchase receipt must be kept as proof of date of purchase.

13 ENVIRONMENT

Should your appliance need replacement after extended use, do not discard it

with the household rubbish but dispose of it in an environmentally safe way.

Waste produced by electrical machine items should not be handled like normal

household rubbish. Please recycle where recycle facilities exist. Check with your

Local Authority or retailer for recycling advice.

KRT706500 EN

14 DECLARATION OF CONFORMITY

VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that,

Product: Digital Laser Rangefinder

Trade mark: POWERplus

Model: KRT706500

is in conformity with the essential requirements and other relevant provisions of the applicable

European Directives, based on the application of European harmonized standards. Any

unauthorized modification of the apparatus voids this declaration.

European Directives (including, if applicable, their amendments up to the date of signature);

2011/65/EU

2014/30/EU

European harmonized standards (including, if applicable, their amendments up to the date of

signature);

EN60825-1 : 2014

EN61326-1 : 2013

EN61326-2-2 : 2013

Keeper of the Technical Documentation : Philippe Vankerkhove, VARO – Vic. Van Rompuy

N.V.

The undersigned acts on behalf of the company CEO,

Philippe Vankerkhove

Regulatory Affairs – Compliance Manager

05/09/2019, Lier - Belgium

Kreator KRT706500 Owner's manual

Brand: Kreator

Model: KRT706500

Category: Distance meters

Type: Owner's manual

Download PDF

report

Kreator KRT706500 Owner's manual

Kreator KRT706500 Owner's manual

Related papers

Other documents