Panasonic DMPBDT700EB Owner's manual

Category
Blu-Ray players
Type
Owner's manual

This manual is also suitable for

Operating Instructions
Blu-ray Disc
TM
Player
Model No. DMP-BDT700
Thank you for purchasing this product.
Please read these instructions carefully before using this product, and save this manual for future use.
Model number suffix “EB” denotes UK model.
Firmware updates
Panasonic is constantly improving the unit’s firmware to ensure
that our customers are enjoying the latest technology.
Panasonic recommends updating your firmware as soon as you
are notified.
For details, refer to “Firmware updates” (> 15) or
http://panasonic.jp/support/global/cs/ (This site is in English only.)
EB
SQT0280
until
2014/7/7
DMP-BDT700EB-SQT0280.book 1 ページ 2014年5月13日 火曜日 午後1時3分
2
SQT0280
Unit
To reduce the risk of fire, electric shock or product damage,
Do not expose this unit to rain, moisture, dripping or splashing.
Do not place objects filled with liquids, such as vases, on this
unit.
Use only the recommended accessories.
Do not remove covers.
Do not repair this unit by yourself. Refer servicing to qualified
service personnel.
Do not let metal objects fall inside this unit.
Do not place heavy items on this unit.
AC mains lead
To reduce the risk of fire, electric shock or product damage,
Ensure that the power supply voltage corresponds to the
voltage printed on this unit.
Insert the mains plug fully into the socket outlet.
Do not pull, bend, or place heavy items on the lead.
Do not handle the plug with wet hands.
Hold onto the mains plug body when disconnecting the plug.
Do not use a damaged mains plug or socket outlet.
The mains plug is the disconnecting device.
Install this unit so that the mains plug can be unplugged from the
socket outlet immediately.
Unit
This unit utilizes a laser. Use of controls or adjustments or
performance of procedures other than those specified herein
may result in hazardous radiation exposure.
Do not place sources of naked flames, such as lighted candles,
on this unit.
This unit may receive radio interference caused by mobile
telephones during use. If such interference occurs, please
increase separation between this unit and the mobile telephone.
This unit is intended for use in moderate climates.
Some portions of this unit may become hot during use. When
moving or cleaning this unit, disconnect the AC mains lead and
wait for 3 minutes or longer.
Placement
Place this unit on an even surface.
To reduce the risk of fire, electric shock or product damage,
Do not install or place this unit in a bookcase, built-in cabinet or
in another confined space. Ensure this unit is well ventilated.
Do not obstruct this unit’s ventilation openings with newspapers,
tablecloths, curtains, and similar items.
Do not place the unit on amplifiers/receivers or equipment that
may become hot. The heat can damage the unit.
Do not expose this unit to direct sunlight, high temperatures,
high humidity, and excessive vibration.
Batteries
Mishandling of batteries can cause electrolyte leakage and may
cause a fire.
Danger of explosion if battery is incorrectly replaced. Replace
only with the type recommended by the manufacturer.
When disposing of the batteries, please contact your local
authorities or dealer and ask for the correct method of disposal.
Do not mix old and new batteries or different types at the same
time.
Do not heat or expose to flame.
Do not leave the battery(ies) in a car exposed to direct sunlight
for a long period of time with doors and windows closed.
Do not take apart or short circuit.
Do not recharge alkaline or manganese batteries.
Do not use batteries if the covering has been peeled off.
Remove batteries if you do not intend to use the remote control for
a long period of time. Store in a cool, dark place.
Precautions
WARNING
Small object
Keep the Memory Card and the batteries out of reach of children
to prevent swallowing.
CAUTION
Caution for AC Mains Lead
(For the AC mains plug of three pins)
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains plug for
your safety and convenience.
A 13-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the
replacement fuse has a rating of 13-ampere and that it is
approved by ASTA or BSI to BS1362.
Check for the ASTA mark Ï or the BSI mark Ì on the body of the
fuse.
If the plug contains a removable fuse cover you must ensure that it
is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a
replacement cover is obtained.
A replacement fuse cover can be purchased from your local
dealer.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC mains
plug (figures A and B). Confirm the AC mains plug fitted and follow
the instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
2. Replace the fuse and close or attach the fuse cover.
Fuse cover
Figure A Figure B
Figure A Figure B
Fuse
(13 ampere)
Fuse
(13 ampere)
DMP-BDT700EB-SQT0280.book 2 ページ 2014年5月13日 火曜日 午後1時3分
3
SQT0280
This unit adopts the following technology for copyright protection.
Cinavia Notice
This product uses Cinavia technology to limit the use of
unauthorized copies of some commercially-produced film and
videos and their soundtracks. When a prohibited use of an
unauthorized copy is detected, a message will be displayed and
playback or copying will be interrupted.
More information about Cinavia technology is provided at the
Cinavia Online Consumer Information Center at
http://www.cinavia.com. To request additional information about
Cinavia by mail, send a postcard with your mailing address to:
Cinavia Consumer Information Center, P.O. Box 86851, San
Diego, CA, 92138, USA.
The operation history may be recorded in the memory of this
unit.
Disposal of Old Equipment and Batteries
Only for European Union and countries with
recycling systems
These symbols on the products, packaging, and/or
accompanying documents mean that used electrical
and electronic products and batteries must not be
mixed with general household waste.
For proper treatment, recovery and recycling of old
products and used batteries, please take them to
applicable collection points in accordance with your
national legislation.
By disposing of them correctly, you will help to save
valuable resources and prevent any potential negative
effects on human health and the environment.
For more information about collection and recycling,
please contact your local municipality.
Penalties may be applicable for incorrect disposal of
this waste, in accordance with national legislation.
Note for the battery symbol (bottom
symbol):
This symbol might be used in combination with a
chemical symbol. In this case it complies with the
requirement set by the Directive for the chemical
involved.
Restriction on use of
unauthorized copied content
Wireless LAN connection
The following limits are in place regarding the usage of this unit.
You must be aware of these limits before using this unit.
Panasonic will in no way be responsible for any incidental damage
which may arise due to a failure to obey these limits, or to any
condition of use or disuse of this unit.
Data transmitted and received over radio waves may be
intercepted and monitored.
This unit contains delicate electronic components.
Please use this unit in the manner in which it was intended and
follow the following points:
Do not expose this unit to high temperatures or direct
sunlight.
Do not bend, or subject this unit to strong impacts.
Keep this unit away from moisture.
Do not disassemble or alter this unit in any way.
Declaration of Conformity (DoC)
Hereby, “Panasonic Corporation” declares that this product is in
compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
Customers can download a copy of the original DoC to our
R&TTE products from our DoC server:
http://www.doc.panasonic.de
Contact to Authorized Representative:
Panasonic Marketing Europe GmbH, Panasonic Testing Centre,
Winsbergring 15, 22525 Hamburg, Germany
This product is intended to be used in the following countries.
Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark,
Finland, France, Germany, Greece, Hungary, Ireland, Italy,
Iceland, Liechtenstein, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, United Kingdom, Switzerland
This product is intended for general consumer. (Category 3)
The WLAN feature of this product shall exclusively be used
inside buildings.
This product on purpose to connect to access point of 2.4 GHz or
5GHz WLAN.
To dispose or transfer this
unit
The unit may keep the user settings information in the unit. If you
discard this unit either by disposal or transfer, then follow the
procedure to return all the settings to the factory presets to delete
the user settings. (> 34, “To return all settings to the factory
preset.”)
DMP-BDT700EB-SQT0280.book 3 ページ 2014年5月13日 火曜日 午後1時3分
4
SQT0280
Table of contents
Precautions . . . . . . . . . . . . . . . . . 2
Getting started
Accessories . . . . . . . . . . . . . . . . . 5
Unit and media care . . . . . . . . . . . 5
Playable media. . . . . . . . . . . . . . . 6
Control reference guide . . . . . . . . 8
Connections and settings
Connecting to a TV . . . . . . . . . . 10
Connecting to
an amplifier/receiver . . . . . . . . . 11
Connecting to the network . . . . . 13
Settings . . . . . . . . . . . . . . . . . . . 14
Playback
Inserting or removing media . . . . 16
HOME menu . . . . . . . . . . . . . . . . 16
Playback . . . . . . . . . . . . . . . . . . . 17
Enjoying
Network Service . . . . . . 20
Home Network feature . . . . . . . . 21
VIERA Link
“HDAVI Control™”. . . . . . . . . . . 23
Settings
Option menu . . . . . . . . . . . . . . . . 24
Setup menu. . . . . . . . . . . . . . . . . 28
Reference
Troubleshooting guide . . . . . . . . 34
Specifications . . . . . . . . . . . . . . . 39
DMP-BDT700EB-SQT0280.book 4 ページ 2014年5月13日 火曜日 午後1時3分
Getting started
5
SQT0280
Getting startedGetting started
Accessories
Check the supplied accessories before using this
unit.
Product numbers are provided in these operating
instructions correct as of May 2014. These may be subject
to change.
Do not use AC mains lead with other equipment.
Using the remote control
Insert the batteries to the terminal so that it (i
and j) matches those in the remote control.
Unit and media care
Clean this unit with a soft, dry
cloth
Never use alcohol, paint thinner or benzine to
clean this unit.
Before using chemically treated cloth, carefully
read the instructions that came with the cloth.
This unit’s lens
Clean discs
Wipe with a damp cloth and then wipe dry with a
dry cloth.
Disc and card handling
precautions
Handle discs by the edges to avoid inadvertent
scratches or fingerprints on the disc.
Do not attach labels or stickers to discs.
Do not use disc cleaning sprays, benzine,
thinner, static electricity prevention liquids or
any other solvent.
Clean any dust, water, or foreign matter from
the terminals on the rear side of the card.
Do not use the following discs:
Discs with exposed adhesive from removed
stickers or labels (rented discs, etc.).
Discs that are badly warped or cracked.
Irregularly shaped discs, such as heart
shapes.
1 Remote control
(N2QAYA000086)
2 Batteries for remote control
1 AC mains lead
(K2CT2YY00103)
1HDMI Cable
(K1HY19YY0032)
Point it at the remote control signal sensor on this
unit. (> 9)
R03/LR03, AAA
(Alkaline or manganese batteries)
Lens cleaner: RP-CL720AE
This lens cleaner may not be available for
sale in all countries, e.g. not available in
Germany, please consult your Panasonic
dealer for advice.
This lens cleaner is sold as specific for DIGA,
but can be used on this unit as well.
DO
DO NOT
Connections and settingsPlaybackSettingsReference
DMP-BDT700EB-SQT0280.book 5 ページ 2014年5月13日 火曜日 午後1時3分
6
SQT0280
Playable media
Device Media markings Device types Contents format
BD-Video Video
BD-RE
Video,
JPEG, MPO
BD-R Video, MKV, Xvid
DVD-Video Video
DVD-R
Video, AVCHD, MKV,
Xvid,
JPEG, MPO,
AAC, FLAC, MP3,
WAV, WMA
DVD-R DL
DVD-RW
Video, AVCHD
+R/+RW/+R DL
Music CD Music [CD-DA]
CD-R
CD-RW
MKV, Xvid,
JPEG, MPO,
AAC, FLAC, MP3,
Music [CD-DA], WAV,
WMA
SD Memory Card (from 8 MB to 2 GB)
SDHC Memory Card (from 4 GB to 32 GB)
SDXC Memory Card (48 GB, 64 GB)
(Compatible with both mini and micro
types)
AVCHD, AVCHD 3D,
MP4,
JPEG, MPO
USB devices
(up to 2 TB)
MKV, MP4, MPEG2,
Xvid,
JPEG, MPO,
AAC, FLAC, MP3,
WAV, WMA
See pages 7 and 39 for more information on the types of content that can be played.
BD
DVD
CD
SD
USB
DMP-BDT700EB-SQT0280.book 6 ページ 2014年5月13日 火曜日 午後1時3分
Getting started
7
SQT0280
Types of discs that cannot be
played by this unit
Any other disc that is not specifically
supported or previously described.
Region management information
Finalize
Any DVD-R/RW/R DL, +R/+RW/+R DL and
CD-R/RW that are recorded by a recorder need to
be finalized by the recorder to play on this unit.
Please refer to the recorder’s instructions.
BD-Video
This unit supports high bit rate audio (Dolby
®
Digital Plus, Dolby
®
TrueHD, DTS-HD High
Resolution Audio
TM
and DTS-HD Master
Audio
TM
) adopted in BD-Video.
3D
3D videos and 3D still pictures can be played
back when this unit is connected to a 3D
compatible TV using a High Speed HDMI
Cable.
2D video can be enjoyed as 3D virtually. (> 26)
Music CD
Operation and sound quality of CDs that do not
comply with CD-DA specifications (copy control
CDs, etc.) cannot be guaranteed to work.
SD card
miniSD Cards, microSD Cards,
microSDHC Cards and
microSDXC Cards can be used,
but must be used with an adaptor
card. These are usually supplied
with such cards, or otherwise
customer provided.
To protect the card’s contents,
move the record prevention tab (on the SD
card) to “LOCK”.
This unit is compatible with SD Memory Cards
that meet SD Card Specifications FAT12 and
FAT16 formats, as well as SDHC Memory
Cards in FAT32 format and SDXC Memory
Cards in exFAT.
If the SD card is used with incompatible
computers or devices, recorded contents may
be erased due to the card being formatted etc.
Usable memory may be slightly less than the
card capacity.
USB device
This unit does not guarantee connection with all
USB devices.
This unit does not support USB device
charging.
FAT12, FAT16, FAT32, and NTFS file systems
are supported.
This unit supports USB2.0 High Speed.
This unit supports an HDD formatted in FAT32
and NTFS. If the HDD is not recognized, the
power to the HDD may not be supplied. Supply
power from an external source.
BD-RE, BD-R
Discs recorded in DR mode using Panasonic
Blu-ray Disc recorders may not play back the
audio etc., correctly.
It may not be possible to play the above media in some
cases due to the type of media, the condition of the
recording, the recording method
,
and how the files were
created.
The producers of the disc can control how discs are
played, so you may not always be able to control play as
described in these operating instructions. Read the disc’s
instructions carefully.
DVD-RAM
Super Audio CD
Photo CD
DVD-Audio
Video CD and Super Video CD
HD DVD
The unit can play back BD-Video/DVD-Video
discs of the following regions codes, including
ALL”:
BD-Video
DVD-Video
2
Example:
DMP-BDT700EB-SQT0280.book 7 ページ 2014年5月13日 火曜日 午後1時3分
8
SQT0280
Control reference guide
When other Panasonic devices respond to the
remote control of the unit, change the remote
control code. (> 33)
1
2
3
4
6
9
8
7
5
22
24
27
23
20
21
19
25
26
17
18
16
13
15
12
11
14
10
1 Turn the unit on and off
2 Open or close the disc tray (> 16)
3 Select title numbers, etc./Enter numbers or
characters
4 Show Miracast
TM
screen (> 21)
5 Show NETFLIX screen (> 20)
6 Show Pop-up menu (> 17)
7[3, 4, 2, 1] : Move the highlight for
selection
[OK] : Confirm the selection
(2;)(;1) : Frame-by-frame (> 17)
8 Show Option menu (> 24)
9 Coloured buttons (red, green, yellow, blue)
Used for various purposes depending on the
display
10 Basic playback control buttons (> 17)
11 Show “Playback Information Window” (> 18)
12 Show the status messages (> 18)
13 Show “Picture Settings” (> 25)
14 Switch the “Sound Effects” setting (> 26)
15 Light up the remote control buttons
16 Transmit the remote control signal
17 TV operation buttons
You can operate the Panasonic TV using this
unit’s remote control. Some buttons may not
work depending on the TV.
[Í TV] : Turn the TV on and off
[AV] : Change input
[WXCH] : Channel select
[ijVOL] : Adjust the volume
18 Start up the DLNA function (> 21)
19 Show HOME menu (> 16)
20 Show the Home screen of the Network
Service (> 20)
21 Show Top menu (> 17)
22 Return to previous screen
23 Show “Subtitles”/“Subtitle Settings” (> 24)
24 Change soundtrack (> 17)
25 Show “3D Settings” (> 26)
26 Switch the “High Clarity Sound” settings
(> 26)
27 Switch the brightness of the unit’s display
(> 33)
DMP-BDT700EB-SQT0280.book 8 ページ 2014年5月13日 火曜日 午後1時3分
Getting started
9
SQT0280
1 Disc tray (> 16)
2 Display
3 USB port (> 16)
4 SD card slot (> 16)
5 Remote control signal sensor
Distance: Within approx. 7 m
Angle: Approx. 20e up and down, 30e left and
right
6 V.OFF LED (Video off LED)
It is possible to set the LED to turn on/off.
(> 33)
7 Open or close the disc tray* (> 16)
8 Basic playback control switches* (> 17)
9 Standby/on switch* (Í/I) (> 14)
Touch to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
* These buttons work just by touching the marks.
When these buttons are touched, the LED will light up.
Rear panel terminals (> 10–13)
Pull to flip down
the front panel.
DMP-BDT700EB-SQT0280.book 9 ページ 2014年5月13日 火曜日 午後1時3分
10
SQT0280
Connections and settings
Connecting to a TV
Connect the AC mains lead after making all connections.
Before making any connections, we recommend that you temporarily disconnect all the units from AC
power.
Use HDMI AV OUT MAIN terminal with the supplied HDMI cable.
Insert the AC mains lead up to A, a point just before the round hole.
To enjoy 4K output, you need to connect this unit to a 4K compatible TV.
Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
To enjoy images in 4K (50p/60p), you need an HDMI cable that supports 18 Gbps.
When outputting 1080p or 24p (4K) signal, please use HDMI cables 5.0 meters or less.
It is recommended that you use Panasonic’s HDMI cable.
A High Speed HDMI-compliant cable that supports 18 Gbps is supplied with this unit.
Part number : K1HY19YY0032
To enjoy image in 4K (50p/60p), set “4K ( 50p/60p ) Output” to “Automatic”. (> 28)
In case problems occur for the playback of content such as no picture or picture distortion, check the
HDMI cable, related connections and the compatibility of TV video input.
To output images in 4K, connect the HDMI cable to a 4K compatible terminal of the connected device.
This unit consumes a small amount of AC power (> 39) even when turned off in standby mode. For
the purpose of energy conservation, the unit should be disconnected if you will not be using it for
extended period of time.
HDMI IN
HDMI cable (supplied)
AC mains lead
(supplied)
To a household mains
socket
DMP-BDT700EB-SQT0280.book 10 ページ 2014年5月13日 火曜日 午後1時3分
Connections and settings
11
SQT0280
Connecting to an amplifier/receiver
Perform either one of the following connections in accordance with your amplifier/receiver input
terminal.
Use HDMI AV OUT MAIN terminal with the supplied HDMI cable.
Set “Digital Audio Output” (> 29).
To enjoy images in 4K (50p/60p), you need to connect a 4K (50p or 60p) compatible amplifier and a
TV with an HDMI cable that supports 18 Gbps.
When connecting to a non-3D or 4K compatible amplifier/receiver, connect this unit to a TV, then
connect the TV and the amplifier/receiver. Please note, however, that the audio can only be up to
5.1ch.
When using the TV or amplifier/receiver that does not have the indication of “(ARC)”
(non-ARC-compatible) on the HDMI terminal, the amplifier/receiver and TV must also be connected
using an optical digital cable or coaxial cable in order to enjoy the TV’s sound through the amplifier/
receiver.
HDMI AV OUT
HDMI IN
(ARC)
HDMI OUT
(ARC)
HDMI IN
Amplifier/receiver
HDMI cable
HDMI cable (supplied)
HDMI AV OUT SUB
You can enjoy richer sound by using the HDMI AV OUT SUB terminal.
Set “HDMI(SUB) Output Mode” to “V.OFF(Video Off)”. (> 28)
Audio is output in high resolution.
It is possible to play back 3D videos, 3D still pictures and 4K videos, etc., when the connected TV is
3D or 4K compatible, even if the amplifier/receiver is not 3D or 4K compatible.
The HDMI AV OUT SUB terminal is not compatible with the VIERA Link “HDAVI Control” (> 23).
HDMI IN HDMI IN
HDMI cable
HDMI cable (supplied)
Amplifier/receiver
DMP-BDT700EB-SQT0280.book 11 ページ 2014年5月13日 火曜日 午後1時3分
12
SQT0280
Set “HDMI Audio Output” to “Off” (> 29).
Set “Digital Audio Output” (> 29).
Connect terminals of the same colour.
Cable connections
A Front speaker (L/R)
B Surround speaker (L/R)
C Centre speaker
D Subwoofer
E Surround back speaker (L/R) (Only for 7.1ch AUDIO OUT)
Set “Analogue Multi Channel” to “On”, and set the speaker presence and size according to your
environment (> 30). (Audio is not output from HDMI AV OUT terminal.)
DIGITAL AUDIO OUT (OPTICAL or COAXIAL)
OPTICAL IN
COAXIAL IN
Optical digital cable
OR
Coaxial cable
Amplifier/receiver
2ch AUDIO OUT
AUDIO IN
L
R
Audio cable
Amplifier/receiver
7.1ch AUDIO OUT
Connect Audio
cables to terminals
corresponding to
the speakers you
have connected.
DMP-BDT700EB-SQT0280.book 12 ページ 2014年5月13日 火曜日 午後1時3分
Connections and settings
13
SQT0280
Connecting to the network
The following services can be used when this unit is connected to broadband.
For details about connection method, refer to the instructions supplied with the connected equipment.
For up-to-date compatibility information on your wireless router, refer to
http://panasonic.jp/support/global/cs/
(This site is in English only.)
See page 3 for the precautions of wireless LAN connection.
Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.
Inserting any cable other than a LAN cable in the LAN port can damage the unit.
Firmware can be updated (> 15)
You can enjoy BD-Live (> 18)
You can enjoy Network Service (> 20)
You can access other devices (Home Network) (> 21)
This unit supports Wi-Fi Direct
TM
and can make a wireless connection to wireless devices without
router. You can use this function when enjoying Home Network feature, etc. Internet access is not
available while connected via Wi-Fi Direct
TM
. (> 21, 31)
Wireless LAN connection
This unit has built-in Wi-Fi
®
and can be connected to a wireless router.
The unit is not compatible with public wireless LAN services (Hotspot etc.) provided in airports,
stations, cafes, etc.
Wireless router, etc.
Internet
LAN cable connection
Broadband router, etc.
Internet
LAN Cable
DMP-BDT700EB-SQT0280.book 13 ページ 2014年5月13日 火曜日 午後1時3分
14
SQT0280
After connecting your new player for the first time
and pressing [Í], the basic settings screen will
appear.
Preparation
Turn on the TV and select the appropriate
video input.
1 Press [Í].
Setup screen appears.
2 Follow the on-screen instructions to
continue with the settings.
If your wireless network is encrypted,
Encryption Key input screen will be displayed.
Input the encryption key of your network.
Settings
The following settings can be performed anytime
in the Setup menu. (> 31, 32)
Easy Settings
Easy Network Setting
After completing “Easy Settings”, you can perform
“Easy Network Setting”.
Select “Wired” or “Wireless” and press [OK].
“Wired” connection
Follow the on-screen instructions to apply your
connection settings.
“Wireless” connection
Before beginning wireless connection setup
Obtain your network name (SSID*
1
).
If your wireless connection is encrypted,
please be sure that you know your
encryption key.
Select “Search for wireless network” or “WPS
(PUSH button)”, then follow the on-screen
instructions and apply the settings.
Easy Network Setting
Wired
Wireless
Select a connection mode.
OK
RETURN
WPS (PUSH button):
If your wireless router supports
WPS (PUSH button), you can
easily perform the settings by
pressing WPS button on it.
WPS (Wi-Fi Protected Setup
TM
) is a standard that
facilitates settings relating to the connection and
security of wireless LAN devices.
1 Press WPS button or corresponding button of
the wireless router until the lamp starts
flashing.
For details, refer to the operating instruction
of the wireless router.
2 Select “Start”.
Search for wireless network:
When you select Search for wireless network”,
the available wireless networks will be
displayed. Select your network name.
If your network name is not displayed, search
again by pressing the red button on the
remote control.
Stealth SSID will not be displayed when you
select “Search for wireless network”. Enter
manually by using “Manual setting”.
(Press [HOME] > select “Setup” > select
“Player Settings” > select “Network” > select
“Network Settings” > select “Wireless
Settings” > select “Connection Setting” >
select “Manual setting”)
Wireless Settings
Select a connection method to wireless access point.
Please refer to the operating instructions of your wireless
access point about connection methods.
Search for wireless network
WPS (PUSH button)
*
2
e.g.
DMP-BDT700EB-SQT0280.book 14 ページ 2014年5月13日 火曜日 午後1時3分
Connections and settings
15
SQT0280
Refer to the operating instructions of the hub or router.
Do not use this unit to connect to any wireless network for
which you do not have usage rights.
Using these networks may be regarded as illegal
access.
If you have trouble getting online on your PC after
performing network settings on this unit, perform the
network settings on your PC.
Please be aware that connecting to a network without
encryption may result in the leaking of data such as
personal or secret information.
*1
An SSID (Service Set IDentification) is a name used by
wireless LAN to identify a particular network. Transmission
is possible if the SSID matches for both devices.
*2
The wireless router compatible with Wi-Fi Protected
Setup
TM
may have the mark.
Occasionally, Panasonic may release updated
firmware for this unit that may add or improve the
way a feature operates. These updates are
available free of charge.
This unit is capable of checking the firmware
automatically when connected to the Internet via
a broadband connection.*
When a new firmware version is available, the
following message is displayed.
DO NOT DISCONNECT the unit from the AC
power or perform any operation while the update
takes place.
After the firmware is installed, “Finish” will be
displayed on the unit’s display. Unit will restart
and the following screen will be displayed.
If downloading on this unit fails or this unit is not
connected to the Internet, then you can download the
latest firmware from the following website and burn it
to a CD-R to update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit. (> 33,
“Firmware Version Information”)
Downloading will require several minutes. It may take
longer or may not work properly depending on the
connection environment.
If you do not want to check for the latest firmware version,
set “Automatic Update Check” to “Off”. (> 33)
* You must agree to the terms of use for the Internet function
and the privacy policy. (> 31, “Notice”)
Firmware updates
Firmware Update
Current Installed Version: X.XX
New Version: X.XX
Do you want to start firmware update?
For the update information, please visit the
following website:
http://panasonic.net/support/
No
OK
RETURN
Yes
The firmware has been updated.
Current Version
:
x.xx
DMP-BDT700EB-SQT0280.book 15 ページ 2014年5月13日 火曜日 午後1時3分
16
SQT0280
Playback
Inserting or removing
media
Notes
When inserting a media item, ensure that it is
facing the correct way, which is the right side
facing up.
When removing the SD card, press the centre
of the card and pull it straight out.
If you connect a Panasonic product with a USB
connection cable, the setup screen may be
displayed on the connected equipment. For
details, refer to the instructions for the
connected equipment.
CAUTION
Do not place objects in front of the unit. The disc
tray may collide with objects when it is opened,
and this may cause malfunction.
HOME menu
Major functions of this unit can be operated from
the HOME menu.
Preparation
Turn on the TV and select the appropriate video
input.
1 Press [Í] to turn on the unit.
2 Press [OK] or [2, 1] to select the item.
Press [OK] or [3, 4] to select the item if
necessary
To show the HOME menu
Press [HOME].
Items to be displayed may vary with the media.
Videos/Music/Photos
Disc
Play back the contents.
(> 17)
When multiple contents are
recorded, select the types
of contents or the title.
SD Card
USB
Home Network
DLNA Client
(> 21)
Miracast
(> 21)
Media
Renderer
(> 22)
Network Service
Displays the Home screen of Network Service.
(> 20)
Setup
Player Settings
(> 28)
Wallpaper
Changes the background of
HOME menu.
SD Card
Management
(> 18)
DMP-BDT700EB-SQT0280.book 16 ページ 2014年5月13日 火曜日 午後1時3分
Playback
17
SQT0280
Playback
1 Insert the media.
Playback starts depending on the media.
2 Select the item to play and press [OK].
Repeat this step if necessary.
DISCS CONTINUE TO ROTATE WHILE MENUS ARE
DISPLAYED. Press [] when you have finished playback
to protect the unit’s motor, your TV screen and so on.
When the following conditions are met, a still picture will be
played back in 4K. The resolution of the still picture will be
changed automatically.
The unit is connected to a 4K compatible TV
“HDMI Video Format” is set to “Automatic” (> 28)
The still picture is being played back in 2D
MKV: Successive play is not possible.
It is not possible to play back AVCHD and MPEG2 videos
which have been dragged and dropped or copied and
pasted to the media.
The following functions may not work depending
on the media and contents.
Press [].
The stopping point is memorized.
Resume play function
Press [1] to restart from this point.
The point is cleared if the media is removed.
On BD-Video discs including BD-J, the
resume play function does not work.
Press [;].
Press [;] again or [1] to restart play.
Search
While playing, press [6] or [5].
Xvid, MKV, MP4 and MPEG2: Audio is not
heard.
Slow motion
While paused, press [6] or [5].
BD-Video and AVCHD: [5] only.
Xvid, MKV, MP4 and MPEG2: Not effective.
The speed increases up to 5 steps.
Music, MP3, etc.: The speed is fixed to a single
step.
Press [1] to revert to normal playback speed.
While playing or paused, press [:] or
[9].
Skip to the title, chapter or track.
Skip forward 1 minute
Press [+60s].
Skip backward 10 seconds
Press [-10s].
Xvid and MKV: Not effective.
While paused, press [2] (2;) or [1] (;1).
Press and hold to fast forward.
Press [1] to revert to normal playback speed.
BD-Video and AVCHD: Forward only.
Xvid, MKV, MP4 and MPEG2: Not effective.
Press [AUDIO].
You can change the audio channel number or
soundtrack language, etc.
Press [TOP MENU] or [POP-UP MENU].
Select the item and press [OK].
Operations during playback
Stop
Pause
Search/Slow motion
Skip
Manual Skip
Frame-by-frame
Changing soundtrack
Show top menu/pop-up menu
DMP-BDT700EB-SQT0280.book 17 ページ 2014年5月13日 火曜日 午後1時3分
18
SQT0280
While playing, press [PLAYBACK INFO.].
You can check the detailed disc playback status.
Press [RETURN] to exit.
While playing, press [STATUS].
The status messages give you information about
what is currently being played. Each time you
press [STATUS], the display information may
change or disappear from the screen.
Depending on media and contents, the display
may change or not appear.
e.g., BD-Video
A T: Title, C: Chapter, PL: Playlist
B Elapsed time in the title
C Current position
D Tot a l t im e
e.g., JPEG
During music playback, the elapsed time, file
name and other relevant information are
displayed on the unit’s display.
e.g.,MP3
Preparation
Connect this unit to a 3D compatible TV. (> 10)
Perform the necessary preparations for the TV.
Play back following the instructions displayed
on the screen.
3D Settings (> 26, 30)
Please refrain from viewing 3D images if you do not feel
well or are experiencing visual fatigue.
In the event that you experience dizziness, nausea, or
other discomfort while viewing 3D images, discontinue use
and rest your eyes.
3D video might not output the way it is set in “HDMI Video
Format” and “24p Output” (> 28).
When playing back 3D photos from “Photos” screen, select
from the “3D” list. (Still pictures in “2D” are played back in
2D.)
If “2D” and “3D” indications are not displayed, press the
red button on the remote control to switch the view of
playback contents.
With BD-Live discs, you can enjoy bonus
contents that use Internet access.
For this BD-Live function, insertion of an SD card
is necessary along with Internet connection.
1 Perform network connection and settings.
(> 13, 14)
2 Insert an SD card with 1 GB or more free
space.
The SD card is used as the local storage.
3 Insert the disc.
Deleting data/Formatting SD
cards
Select “SD Card Management” in the HOME
menu (> 16), then select “BD-Video Data
Erase” or “Format SD Card”.
The usable functions and the operating method may vary
with each disc, please refer to the instructions on the disc
and/or visit their website.
“BD-Live Internet Access” may need to be changed for
certain discs (> 32).
Show the status messages
Audio/video attribute information of
disc.
Settings status of “Digital Audio
Output” (> 29).
HDMI output information.
Play
BD-Video
Date 11/12/2010
Size 500 x 375
Manufacturer
Equipment
No.
Enjoying 3D video and photos
Enjoying BD-Live
DMP-BDT700EB-SQT0280.book 18 ページ 2014年5月13日 火曜日 午後1時3分
Playback
19
SQT0280
Play a slideshow of photos and adjust various
settings during the playback.
1 Insert the media.
2 Select “Photos”.
3 Select an item and press the green button.
The following items can be set.
Still pictures displayed as “ ” cannot be displayed as
thumbnail with this unit.
When both the music CD and the USB device with
recorded music are inserted into this unit, the music CD
has priority to be played back as background music.
You cannot play back AAC as background music.
Slideshow
Start
Slideshow
Start the slideshow.
You can display still pictures in
the selected folder one by one
at a constant interval.
Interval Change the display interval.
Transition
Effect
Select the effect when sliding
pictures.
Repeat Play
Set whether to repeat the
slideshow.
Soundtrack
Set whether to play
background music.
FLAC and MP3, etc., on the
USB device can be played
back during the slideshow of
JPEG on the USB device or
the SD card.
A music CD can also be
played back during the
slideshow of JPEG on the
SD card.
Soundtrack
Folder
Select the folder from which
the music files are played.
Random
Soundtrack
Background music is played in
random order.
DMP-BDT700EB-SQT0280.book 19 ページ 2014年5月13日 火曜日 午後1時3分
20
SQT0280
Enjoying
Network
Service
Network Service allows you to access some
specific websites supported by Panasonic.
* Images are for illustration purposes, contents may change
without notice.
Preparation
Network connection (> 13)
Network setting (> 14)
1 Press [INTERNET].
2 Select the item and press [OK].
To exit from Network Service
Press [HOME].
When playing content in the media, Network Service
cannot be accessed by pressing [INTERNET].
In the following cases, settings are possible using the
Setup menu items.
When restricting the use of Network Service
(> 32, “Network Service Lock”)
When the audio is distorted
(> 31, “Audio Auto Gain Control”)
When wrong time is displayed
(> 31, “Time Zone”, “Summer Time”)
When using a slow Internet connection, the video may not
be displayed correctly. A high speed Internet service with a
speed of at least 6 Mbps is recommended.
Be sure to update the firmware as soon as a firmware
update notice is displayed on the screen. If the firmware is
not updated, you may not be able to use Network Service
function properly. (> 15)
Network Service Home Screen is subject to change
without notice.
The services through Network Service are operated by
their respective service providers, and service may be
discontinued either temporarily or permanently without
notice. Therefore, Panasonic will make no warranty for the
content or the continuity of the services.
Some features of websites or content of the service may
not be available.
Some content may be inappropriate for viewers.
Some content may only be available for specific countries
and may be presented in specific languages.
*
MORE
BACK
Network Service provides a variety of
selected Internet services such as the
following.
Online movie rental service
Video browsing service
Internet
Netflix can be accessed directly by
pressing [NETFLIX] button.
DMP-BDT700EB-SQT0280.book 20 ページ 2014年5月13日 火曜日 午後1時3分
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44

Panasonic DMPBDT700EB Owner's manual

Category
Blu-Ray players
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI