The Epson
®
StoryTeller™ kit includes everything you need to make
your own photo book. But before you create your book, there are a
few things you should keep in mind for a smooth StoryTeller
experience.
After you’ve read through this sheet, see Creating a Photo Book for
step-by-step instructions on installing the software and making a
photo book.
Preview the Coming Attractions
Before you print the pages of your book, it’s a good idea to proof them
to make sure things look exactly how you want them to look.
Check:
•
The placement of photos and captions
•
How the photos are cropped
•
The spelling of the caption text
Preview
Then, just to be sure, you can select the Print Preview option in your
printer driver to get one final look at your pages before you print them.
Draft
If you want to see a printed draft of your book, you can print mock-up
pages on plain paper. Just load plain paper in your printer and select
Draft Color in the print window.
You don’t have to print the entire book. You can print one page at a
time by selecting Print Pages for the page range and then typing the
page number you would like to print.
StoryTeller’s Workload
Powerful applications often push PCs to their performance limits. In
organizing and printing all of your photos in professional layouts,
StoryTeller will require a lot from your PC. Depending on the kind of
processor and amount of memory your PC has, we recommend you
close all other applications before starting StoryTeller.
Fill the Pages
StoryTeller provides a variety of page layouts for you to choose from
when organizing your photos. Depending on the layouts you select and
the size of the book, the number of photos needed can vary. So you’ll
want to be sure that you have enough photos to fill your book.
Below are the minimum number of photos needed for each layout style.
Check all your
print settings
Select Print Preview
to view your pages
before printing
Layout Style 10-Page Book 20-Page Book
Celebrations 38 76
Passages 20 40
Storybook 30 60
Rock & Roll 24 48
Travelogue 30 60
Way We Were 24 48
Travelogue
Layout
The Epson
®
StoryTeller™ kit includes everything you need to make
your own photo book. But before you create your book, there are a
few things you should keep in mind for a smooth StoryTeller
experience.
After you’ve read through this sheet, see Creating a Photo Book for
step-by-step instructions on installing the software and making a
photo book.
Preview the Coming Attractions
Before you print the pages of your book, it’s a good idea to proof them
to make sure things look exactly how you want them to look.
Check:
•
The placement of photos and captions
•
How the photos are cropped
•
The spelling of the caption text
Preview
Then, just to be sure, you can select the Print Preview option in your
printer driver to get one final look at your pages before you print them.
Draft
If you want to see a printed draft of your book, you can print mock-up
pages on plain paper. Just load plain paper in your printer and select
Draft Color in the print window.
You don’t have to print the entire book. You can print one page at a
time by selecting Print Pages for the page range and then typing the
page number you would like to print.
StoryTeller’s Workload
Powerful applications often push PCs to their performance limits. In
organizing and printing all of your photos in professional layouts,
StoryTeller will require a lot from your PC. Depending on the kind of
processor and amount of memory your PC has, we recommend you
close all other applications before starting StoryTeller.
Fill the Pages
StoryTeller provides a variety of page layouts for you to choose from
when organizing your photos. Depending on the layouts you select and
the size of the book, the number of photos needed can vary. So you’ll
want to be sure that you have enough photos to fill your book.
Below are the minimum number of photos needed for each layout style.
Check all your
print settings
Select Print Preview
to view your pages
before printing
Layout Style 10-Page Book 20-Page Book
Celebrations 38 76
Passages 20 40
Storybook 30 60
Rock & Roll 24 48
Travelogue 30 60
Way We Were 24 48
Travelogue
Layout
The Epson
®
StoryTeller™ kit includes everything you need to make
your own photo book. But before you create your book, there are a
few things you should keep in mind for a smooth StoryTeller
experience.
After you’ve read through this sheet, see Creating a Photo Book for
step-by-step instructions on installing the software and making a
photo book.
Preview the Coming Attractions
Before you print the pages of your book, it’s a good idea to proof them
to make sure things look exactly how you want them to look.
Check:
•
The placement of photos and captions
•
How the photos are cropped
•
The spelling of the caption text
Preview
Then, just to be sure, you can select the Print Preview option in your
printer driver to get one final look at your pages before you print them.
Draft
If you want to see a printed draft of your book, you can print mock-up
pages on plain paper. Just load plain paper in your printer and select
Draft Color in the print window.
You don’t have to print the entire book. You can print one page at a
time by selecting Print Pages for the page range and then typing the
page number you would like to print.
StoryTeller’s Workload
Powerful applications often push PCs to their performance limits. In
organizing and printing all of your photos in professional layouts,
StoryTeller will require a lot from your PC. Depending on the kind of
processor and amount of memory your PC has, we recommend you
close all other applications before starting StoryTeller.
Fill the Pages
StoryTeller provides a variety of page layouts for you to choose from
when organizing your photos. Depending on the layouts you select and
the size of the book, the number of photos needed can vary. So you’ll
want to be sure that you have enough photos to fill your book.
Below are the minimum number of photos needed for each layout style.
Check all your
print settings
Select Print Preview
to view your pages
before printing
Layout Style 10-Page Book 20-Page Book
Celebrations 38 76
Passages 20 40
Storybook 30 60
Rock & Roll 24 48
Travelogue 30 60
Way We Were 24 48
Travelogue
Layout
You should also check that the following printer settings are correct:
•
Paper type – Plain Paper
•
Page size – 5 x 7 or 8 x 10
•
Page orientation – Landscape
Final
When you print the final book on photo paper, select Full-Size Color
Prints and check the following printer settings:
•
Paper type – Premium Glossy Photo Paper, or high quality
gloss paper (for non-Epson printers)
•
Page size – 5 x 7 or 8 x 10
•
Page orientation – Landscape
Patience is a Virtue
StoryTeller makes it easy for you to arrange and print a photo book.
But this ease comes at a small price; your colorful digital photos and
creative StoryTeller layouts end up as very large files on your computer.
This means that it might take some time for StoryTeller to finish
working on your layouts—especially if you’re using an older computer.
Attaching the full wrapping cover Attaching separate front and back cover pages
Epson is a registered trademark of Seiko Epson Corporation. StoryTeller is a trademark of
Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and
may be trademarks of their respective owners. Epson disclaims any and all rights in those
marks.
© 2005 Epson America, Inc. Printed in USA CPD-19523
Select Draft Color
StoryTeller lets you know how far along it is by displaying the status
bar below:
Please wait until this window disappears before continuing with what
you’re doing. Don’t exit the program or start any other programs while
the status bar is running.
Wrap it Up!
Once you’ve printed your StoryTeller photo pages, you can create and
print a colorful, themed cover for your photo book.
Depending on the type of printer you have and its capabilities, you
might not be able to print the full wrapping cover for your photo book.
Instead, you might need to use the extra photo page sheets that came
in your kit to print a front and back cover separately.
Here’s how to tell which cover you can create and print:
Epson Printers
All Epson printers can print the full wrapping cover. In fact, they can all
print on paper up to 44 inches long.
Canon
®
Printers
If you have a Canon printer, you can probably print the full wrapping
cover for the 5 x 7-inch photo book.
Your Canon printer probably cannot print the full wrapping cover for
the 8 x 10-inch book. For the latest information, go to
http://www.epson.com/storyteller.
HP,
®
Lexmark,
®
or Dell
®
printers
If you have one of these brands of printer, it probably cannot print the
full wrapping cover for the 5 x 7-inch photo book.
Higher-end HP, Lexmark, or Dell printers can probably print the full
wrapping cover for the 8 x 10-inch book. For the latest information, go
to http://www.epson.com/storyteller.
You should also check that the following printer settings are correct:
•
Paper type – Plain Paper
•
Page size – 5 x 7 or 8 x 10
•
Page orientation – Landscape
Final
When you print the final book on photo paper, select Full-Size Color
Prints and check the following printer settings:
•
Paper type – Premium Glossy Photo Paper, or high quality
gloss paper (for non-Epson printers)
•
Page size – 5 x 7 or 8 x 10
•
Page orientation – Landscape
Patience is a Virtue
StoryTeller makes it easy for you to arrange and print a photo book.
But this ease comes at a small price; your colorful digital photos and
creative StoryTeller layouts end up as very large files on your computer.
This means that it might take some time for StoryTeller to finish
working on your layouts—especially if you’re using an older computer.
Attaching the full wrapping cover Attaching separate front and back cover pages
Epson is a registered trademark of Seiko Epson Corporation. StoryTeller is a trademark of
Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and
may be trademarks of their respective owners. Epson disclaims any and all rights in those
marks.
© 2005 Epson America, Inc. Printed in USA CPD-19523
Select Draft Color
StoryTeller lets you know how far along it is by displaying the status
bar below:
Please wait until this window disappears before continuing with what
you’re doing. Don’t exit the program or start any other programs while
the status bar is running.
Wrap it Up!
Once you’ve printed your StoryTeller photo pages, you can create and
print a colorful, themed cover for your photo book.
Depending on the type of printer you have and its capabilities, you
might not be able to print the full wrapping cover for your photo book.
Instead, you might need to use the extra photo page sheets that came
in your kit to print a front and back cover separately.
Here’s how to tell which cover you can create and print:
Epson Printers
All Epson printers can print the full wrapping cover. In fact, they can all
print on paper up to 44 inches long.
Canon
®
Printers
If you have a Canon printer, you can probably print the full wrapping
cover for the 5 x 7-inch photo book.
Your Canon printer probably cannot print the full wrapping cover for
the 8 x 10-inch book. For the latest information, go to
http://www.epson.com/storyteller.
HP,
®
Lexmark,
®
or Dell
®
printers
If you have one of these brands of printer, it probably cannot print the
full wrapping cover for the 5 x 7-inch photo book.
Higher-end HP, Lexmark, or Dell printers can probably print the full
wrapping cover for the 8 x 10-inch book. For the latest information, go
to http://www.epson.com/storyteller.
You should also check that the following printer settings are correct:
•
Paper type – Plain Paper
•
Page size – 5 x 7 or 8 x 10
•
Page orientation – Landscape
Final
When you print the final book on photo paper, select Full-Size Color
Prints and check the following printer settings:
•
Paper type – Premium Glossy Photo Paper, or high quality
gloss paper (for non-Epson printers)
•
Page size – 5 x 7 or 8 x 10
•
Page orientation – Landscape
Patience is a Virtue
StoryTeller makes it easy for you to arrange and print a photo book.
But this ease comes at a small price; your colorful digital photos and
creative StoryTeller layouts end up as very large files on your computer.
This means that it might take some time for StoryTeller to finish
working on your layouts—especially if you’re using an older computer.
Attaching the full wrapping cover Attaching separate front and back cover pages
Epson is a registered trademark of Seiko Epson Corporation. StoryTeller is a trademark of
Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and
may be trademarks of their respective owners. Epson disclaims any and all rights in those
marks.
© 2005 Epson America, Inc. Printed in USA CPD-19523
Select Draft Color
StoryTeller lets you know how far along it is by displaying the status
bar below:
Please wait until this window disappears before continuing with what
you’re doing. Don’t exit the program or start any other programs while
the status bar is running.
Wrap it Up!
Once you’ve printed your StoryTeller photo pages, you can create and
print a colorful, themed cover for your photo book.
Depending on the type of printer you have and its capabilities, you
might not be able to print the full wrapping cover for your photo book.
Instead, you might need to use the extra photo page sheets that came
in your kit to print a front and back cover separately.
Here’s how to tell which cover you can create and print:
Epson Printers
All Epson printers can print the full wrapping cover. In fact, they can all
print on paper up to 44 inches long.
Canon
®
Printers
If you have a Canon printer, you can probably print the full wrapping
cover for the 5 x 7-inch photo book.
Your Canon printer probably cannot print the full wrapping cover for
the 8 x 10-inch book. For the latest information, go to
http://www.epson.com/storyteller.
HP,
®
Lexmark,
®
or Dell
®
printers
If you have one of these brands of printer, it probably cannot print the
full wrapping cover for the 5 x 7-inch photo book.
Higher-end HP, Lexmark, or Dell printers can probably print the full
wrapping cover for the 8 x 10-inch book. For the latest information, go
to http://www.epson.com/storyteller.
/
