M A X F I E L D
Op e r at i n g Ma n u a l
W I R L E S S C H A R G I N G
P O W E R B A N K
Anti-slipping rubber
Micro USB input
Micro USB connection
USB connection
USB cable
USB output
LED battery indicator
Power LED
Communication LED
Power button
P r o d u c t o v e r v i e w
First connect the POWERBANK via USB
cable and micro USB with an adapter
and then with a powersocket or via USB
with another power source (Notebook,
Computer, etc). Therefor you rst charge
the intern battery. If you want to charge
your mobile device you can choose bet-
ween two possibilities:
1. By wireless charging
2. By USB connection
1. Press the powerbutton and put your
wireless charging able device in the
middle of the POWERBANK. After a
shorts sound it starts charging automa-
tically.
2. Connect your phone via USB cable
with the POWERBANK.
There is also the possibility to charge two
The LED indicator shows you the current
state of the POWERBANK.
LED indicator Product status
Red Standby LED
Blue (ashing) Communication
White POWERBANK battery status
F i r s t s t e P s
The POWERBANK shuts down automati-
cally after ve minutes not using it.
3
Step 1
Step 2
Step 3
2
1
Attention : As proof that the Pad communicates with the receiver, the communication LED still
ashes after complete charging.
s a F e t y N o t e
ATTENTION!
Before the rst usage please charge the battery of the POWERBANK.
Charge the POWERBANK at least once in a period of 12 weeks to pro
-
vide damage of the battery. Please do not use a damaged power supply
or power socket. Do not use the product in areas with a temperature
range out of -20°C to 40°C. Do not restore your product in places with
high temperature or direct solar radiation. Do not crinkle or damage the
power cord. Do not make it wet or use it with wet hands. Please keep
the product away from metallic objects as chains, keys etc. and keep it
away from the inner of water heaters, microwaves, high pressure vessel
and other kitchen gadgets. Do not lay any magnetcards, magnetic re-
cord media or precise instruments on or near the product. It may have
inuence on the function and the work process. Do not lay the product
in places that are easy to fall. Do not take the product in your mouth. If
children are using the product watch out for the right handling. If the
product gets wet please dry it with a towel and contact our support. Do
not try to repair or dismantle the product on your own. It may cause da
-
mage and leads to expire of the warrenty. People who use a heart-birth-
maker should consult a doctor befor using this product. While using it
keep a distance from 22cm because the product can effect the function
of the heart-birth-maker. Products with a QI mark comply with the wire
-
less charing standard specication of WPC.
For your own safety, please read the construction manual carefully. Af-
ter opening the package please check it on its completness. The disre-
gard of the safety note may lead to heat, re, burn or frequent electric
shocks. Wrong handling may lead to martial as personelle damage
and in worst cases it may also lead to death.
Maxeld GmbH
Albert-Einstein-Str.1 . 74722 Buchen, Germany
Telefon: +49 (0) 6281 / 56435-0 . Fax: +49 (0) 6281 / 56435-290
info@maxeld.de . www.maxeld.de/en
L i a b i L i t y e x c L u s i o N
Because we aren‘t abble to control the charging, the usa-
ge and the observance of the safety notes Maxeld can‘t
take liability for loss, damage and expences. Any claim on
compensation caused by operation, breakdown, failure or
coherent in any way will be declined. For personal injurys
as well as property damage caused by our supply, we won‘t
take liability. Insofar compulsory authorised, our commit-
ment to pay damages, for whatever legal foundation, will be
dened on the invoice value of the product wich is affected
in the incidence. This does not apply when we have to liable
for gross negligence or because of statutory provisions.
IMPORTANT!
• Status 07/2014 • Technical changes reserved • No accountability for falsity and misprint
/
